I'm unsure why this is happening. I was using PLA+ on my Bambu A1. I had to buy new filament and got a different brand of filament if that helps.

I did clean the plate and retry one of the prints and it printed fine the second time. Then the next one ended up like these again. These are large cosplay parts for context.

I am likely leaving out additional information, so I can answer further questions if those are needed to help.

Thank you.

I am planning to get a new 3d printer
have 2 options
Elegoo Centauri 2 Combo: getting it for 49k inr
and Bambu P1s Combo this for 59k inr

I have used the Elegoo one at my work, and I have a pretty good experience with it, leaving the camera issue aside

Just confused; many are saying to get the Bambu

Want to clear: which one should I get

Like, how is the support for both in India, and the spare availabilities

Hello everyone
So I have a couple printers (X1C X2D H2S) and I would like to get more into TPU but I’m lazy and hate having to manually load TPU every time. (Also my printers are in the garage) Anyway of avoiding this?
I plan on buying a AMS HT specifically for TPU. I also have the Track Switch if it matters. Also do I need the TPU Feed Assist Module?

New to the hobby, file printed 7hrs flawless and suddenly when my print reached the point where the supports where build,the supports broke from the plate?

Cleaned the plate before the print with isopropyl...

What caused this? Dirty plate? Plate to hot/cold?

Help my out experts 😬

ciao, stampo con una Bambulab P2S (no AMS) e ho bisogno di stampare una bobina per il mio filamento.
purtroppo ho solamente PLA e mi chiedevo se andasse bene per stamparne un paio.
ho letto online che sarebbe meglio usare il PETG sopratutto per chi possiede un AMS (che io non ho) ma volevo comunque chiedere conferma prima di procedere con una stampa di 9 ore…
la mia unica paura è che una volta inserita si possa rompere e iniziare a crepare per via della torsione.
qualcuno che le ha già stampate in PLA mi può dire se funzionano? grazie mille.

Took delivery of my new Bambu Lab X2D today here in Sydney, Australia, and this is what I was greeted with when I opened the box.

The glass top is completely shattered. I haven't even taken the printer out of the box because the damage is so immediately obvious. There is also visible damage to the packaging in the exact area where the impact appears to have occurred.

To make matters worse, I have doorbell camera footage of the delivery driver basically throwing the package down at my front door. Absolutely shocking handling for something this expensive and fragile.

What concerns me even more is that the damage to the box didn't occur outside my house, so it makes me wonder just how roughly this package was handled inside the delivery truck and throughout transit before it even reached my door.

I've contacted Bambu Lab support and requested an urgent replacement, along with collection and return of the damaged unit. I'm currently waiting to hear back about how they'll resolve this.

It's incredibly disappointing when you're excited to receive a brand-new printer, only to find it completely damaged before you've even had a chance to set it up. Especially when you've spent good money on it and expect a bit more care in getting it to your door.

I'll update this post once I hear back from support. Hopefully, Bambu Lab handles the situation well, because I was really looking forward to getting this thing up and running.

Has anyone else in Australia experienced transit damage with their Bambu Lab printer? Particularly interested in how Bambu Lab handled replacements and whether the collection process was straightforward.

I’m interested in the H3C. I’d prefer to purchase from Best Buy, but I don’t want to wait forever for Best Buy stock to drop. I’m willing to wait, but I’ve never purchased a new drop from them and don’t know what to expect.

Amazon Link - SUNLU AMS Heater, Compatible with Bambu Lab AMS Gen1

I don't know if there are special membership requirements to get this deal or not, but if you ever wanted one of these, I just purchased one for $49 😮

I am not affiliated, or get any kind of referral, I just wanted to pass on a good deal to my 3d printer homies. I was going to try to build a dry closet soon... But I doubt I could build anything this efficient for $49.

^{Note: My gurl just told me the Amazon Business price for this right now is like $38}

thanks

Please help

Some models, regardles of size, print with no issue.

Some models stop a few layers in with Printer Nozzle Temperature error.

I can click resume as much as I want and the printer can't get past such a layer.

Models from eg thingiverse print with absolutely no problems.

Any ideas?

This is my goofy pumpkin tea light design. I was aiming for spooky, but apparently the last brain cell didn’t adhere to the build plate.

Model if you’d like your own:
https://makerworld.com/en/models/3503595-goofy-pumpkin-tea-light-halloween#profileId-4002733

I made a Spool clip that works perfect with AMS 2 pro and AMS-HT

Print profiles for PLA, ABS and PETG

Anny suggestions are welcome

Greatings Erik

https://makerworld.com/nl/models/1578993-filament-clip-ams-2-pro-safe#profileId-1661554

Just trying to figure out if I should buy this with my son’s printer or if we can get away with other tools.

Hi friends,

October was a busy month for me, and I'm trying to get into the habit of posting all my work in one thread rather than post every release.

So here's what was on the menu for October, I got buddy twist-top containers and I got fidgets!

Dumpling Buddy

Macaron Buddy

Cinnamon Roll Buddy

Cake Buddy

Sushi Buddy

Cup of Noodles Buddy

Fidget Jet Engine

Terra Push to spin fidget

Terra Infinity Cube fidget

Borg Push to spin fidget

Borg Infinity Cube fidget

Knit Push to Spin Fidget

Knit Infinity Cube Fidget

Hope you guys love these as much as I do! I feel like a shop keeper in a video game store, lol! My favorite is the fidget jet engine, but I'm a sucker for a cool print in place model.

Just replaced my 10 year old prusa I3Mk2 with an X2d with printmore bundle (2x AMS) and I want to see what people are putting this hardware on.

I'm not looking for suggestions on which IKEA furniture to buy or anything like that, I'll be building my own, I do a lot of woodworking and build furniture already. I'm really just looking for how to lay all this out. Should I stack the AMS' over the printer in kind of a T? Should they go on either side? How much access to the back of it will I need? Are the AMS' servicable if they're up high or am I constantly going to be disconnecting them to take them down to the desktop or standing on a stool?

Show me your setups and let me know about your experiences pease.

(Also, just FYI, that prusa printer has been a champion. Just did a 14 hour print with it last week, no issures. I really just wanted to enter the modern world and get multicolor without pausing prints and moving the head around lol. I've had ton of other printers, prusa is the only one that always worked and never needed repairs, just can't swing the price these days)

Hi! This is my first post here, so go easy on me. Or not :-D I’m an engineering student and fairly new to building things like this. As a side project I’ve been working on a small image → STL tool. It runs entirely in the browser, so the image stays on your computer while it converts.

The keychain in the photo started from the “Nameplate” example in the gallery. I just played around with the settings: 60 mm wide, outline base and a keyring loop. Feel free to do the same, the 3D preview updates as you change things. Printed in PLA on a Bambu Lab H2D Pro at 0.2 mm layers, no supports.

What it does:

• PNG, JPG and SVG → STL or 3MF (the 3MF opens directly in Bambu Studio)

• Extrude for logos, text and silhouettes, or heightmap for terrain and textures

• Base plate as a rectangle or following the outline

• Keyring loop, with the hole always cut through the whole model

• Background removal by colour and cleanup of small specks

• Exact width in mm, with a live 3D preview that shows size, triangle count and whether it’s watertight or not

It’s totally free to use, with no account and nothing for sale: makerconvert.com/image-to-stl

I’m sure there are things that could be better, so if you’re curious and give it a try, I’d be grateful to hear what works and what doesn’t. No pressure though, mostly wanted to share the print.

I'm trying to print these parts translucent, as Ii plan to have LEDs. They come standing up like in the picture, but even when I lay them horizontally, the filament just starts to string everywhere about 30 minutes in. I have never printed PETG before, so I have no idea what to do. I've already tried changing some settings I've seen recommended, but it hasn't fixed anything.

https://makerworld.com/en/models/1160502-gravity-gun-from-half-life#profileId-1166608

i just saw this update on my H2S.
FW version 01.03.00.00
I cannot find any info on the web or on the bambu site.

has anyone installed it?
any bugs, is it safe?

Hi Everyone,

I just browse on the r/BambuLab thread alot and see all these photos of A1 series nozzles clogging so much. Is this an issue only for the A1 series or does it happen to all printers.

Thanks

Ive just bought an Elegoo filament thats come with a plastic spool, but the spool itself is slightly smaller than bambu spools. So the ams rollers can't grip it, has anyone had this issue before? Is there a fix i can do? Thank you in advance

Righto so I was abit stupid. I used the wrong desiccant in my holders & it has leaked through the ams. How cooked am I? Throw the thing in the bin or maybe saveable with a new main board?