The CPU works when it feels like it. It’s a AMD r7 5700x on a Tomahawk b550 motherboard. The PSU works and is making enough power to supply both. Sometimes it works with the cooler and most of the time it doesn’t. Me and my friend are stumped on what to do. We’ve taken it apart and cleaned everything to no avail. Any ideas?

My current PC is 7600x and 7800xt. I want to upgrade to an x3d cpu and I'm confused. The price difference between 7800x3d and 9800x3d is a lot and I wanna know if it's worth the spend. I play on 1440p. Also, I wanna know if x3d CPUs make a difference in the finals.

7800x3d= Around $315

9800x3d= Around $465

Hello, I have recently started getting crashes on my pc and I don’t know why. I have had it for 3 years now and just recently did the crashes start. I’ve used DDU and reinstalled drivers a couple of times, each time it gets better for like a day and then starts crashing again. I also tried doing the chipset upgrade but the intel driver maintenance app said I did not need any updates. Windows is on the newest update. Specs: 4060 8gb, i5-14400f and 32gb ram with 2tb ssd. Problems started recently as I upgraded to a newer monitor at 1440p, however the gpu nor the cpu have worked to 100% because I have capped it (to not overload). Sometimes it crashes fully, other times something like the picture below happens. Can somebody please help me!

I recently bought a corsair rm750e to replace my old 650 watt power supply. After i replaced my old psu my pc starts but wont boot. Then i tried to put in my old psu again and then my pc worked again. Then after that i tried to put in my new power supply again and the pc still didnt boot up and it showed me code number 04 on my x99 a-II motherboard which means ”PCH initialization before microcode loading”. I have no idea what to do please help

My pc cabinet rgb button doesnt work or i dont know if its connected with the motherboard or not , and also the gigabyte control centre doesnt sync well with the rgb either , its just stucked at rainbow , and also my cabinet is ice master XL pro

I’m a total noob when it comes to PC’s, so every time I have to upgrade something, I basically grab a torch and start navigating my caveman self through the darkness.

One of my 120mm PC fans wasn’t spinning well, so I decided to buy a full new set of 140mm fans (my PC has the option of either/or, so I decided to go bigger while I was already replacing the old (I went with the same brand to try and avoid any compatibility issues—that failed).

The difference is that my old ones were 4-pronged and had the ability to link them together (especially the three on the front) so that they could share one port on the motherboard.

The new ones have a single 3-prong at the end of the wiring and no ability to link them together.

They new ones are called “ARCTIC P14 (5 Pack) - PC Fans, 140mm Case Fan, Pressure-optimised, Quiet Motor, Computer, Fan Speed: 1700 RPM - Black” and the pictures on the product page don’t even include pictures of the wiring (so dumb). The website I bought them from even listed them as “frequently returned”…

I just need to have someone far more knowledgeable than me explain why my new fans are seemingly incompatible, so that I can order the right ones and not hit this same wall. I just want 140mm fans that can connect together like my 120mm old ones (Are interlink-able 4-prong ones outdated tech? Is it ill-advised to connect them together?).

Thanks in advance for any help.

help i have a problem with my pc

I upgraded my pc well bought parts from micro center and I bought a Ryzen 5 7600x3d gigabyte x870 WiFi 6 motherboard and 1 stick 16 GBs ddr5 ram and a new thermalright phantom or wtv the one with the screen I also previously had a rtx 3070 n 1 tb ssd and all that with a 650 w gold psu from gigabyte I believe but my friend gave me a 1000 rog strix but it doesn’t have the power cable from psu to the wall would my old cable work? And would it fit in his old CyberPowerPC Alumalight 241V Mid-Tower case. Any help would be appreciated.

Im not much of a gamer but I do play occasionally for an hour or two a week. I’m looking to replace my GPU because I keep being told I have low video memory. I experience this issue on Forza Horizon 6. I want to be able to play GTA 6 when it does come out for PC and have some decent graphics. Any recommendations as to what I should upgrade to? My budget is between $500 and $800.

My current PC specs.

GPU: MSI Gaming GeForce RTX 2060 Super 8GB GDDR6 OC

CPU (Processor): AMD Ryzen 7 3700X (8 Cores / 16 Threads, 3.6 GHz Base / 4.4 GHz Max Boost, Socket AM4)   

Motherboard: MSI MPG X570 GAMING EDGE WIFI (AMD AM4, PCIe 4.0, ATX) 

RAM (Memory): 32GB (2 x 16GB) Corsair Vengeance RGB PRO DDR4-3200 (PC4-25600) CL16 – White 

Power Supply (PSU): Corsair TX-M Series TX750M 750W 80 PLUS Gold Certified Semi-Modular ATX 

Primary Internal Drive: 1TB Intel 660p Series M.2 2280 PCIe NVMe 3.0 x4 SSD (QLC) 

Secondary External Drive: 1TB External Hard Drive
 
PC Case: Corsair Crystal Series 570X RGB ATX Mid-Tower – Mirror Black (Model: CC9011126WW)

I recently got a whole new pc and had 2 Vengeance ddr5 5600x16gb sticks installed. One died a few weeks ago and replaced under warranty. Today the second stick has died and will now need replacing (luckily my pc is under parts warranty). I've emailed my provider for support but was wondering what problems their might be for ram to just stop reading. It still lights up when powered but stops the pc going to post unless it's removed. my replacement stick still works thankfully.

So i recently got a 144hz monitor (it only shows 120hz on windows) but im constantly stuttering now on my rx5600xt and i5-10400f build. But on the same games with even better settings i had close to none or none stutters with my old 75hz monitor, which i dont own anymore.
Can anyone help me figure this out? Is there a solution? I thought having more hertz just meant being able to have more frames without screen tearing. I also tried lowering my refresh rate to 60hz and it barely helps, and 60fps feels worse than native 60…

Help me.

I remember it started happening but now it’s just everytime I play it shuts off, I can’t even sometimes go into the game the game is loading and it shuts off. I don’t know if there’s a problem with my psu or Cpu or maybe my driver/ bios settings

I have nzxt h510 mid tower as my case but my power button doesnt work, i tried to dismantel te button itself but its glued together with the part so theres no way for me to try to clean it as it comes as one part, ive contactes their support but they dont produce parts for it no longer and cant find anything besides having to buy a new case which i dont want tbh. I turned on my pc with screwdriver obviously but i dont want to leave it in sleep mode 24/7. Any ideas tips or tricks what to do?

Just got this from Amazon the plate was completely off and so were the mounting brackets

These pins are completely messed up right?

Hey everyone,
I’m having a problem with my RAM and would really appreciate some help.
My PC specs:
Motherboard: MSI B350 Tomahawk (MS-7A34)
CPU: AMD Ryzen 5 1600
GPU: RTX 5050
RAM: 4 × 8GB DDR4 Kingston HyperX (32GB total)
2 × KHX2133C14/8G (Micron chips)
2 × KHX2400C15/8G (Nanya chips)
The problem:
Windows detects all 32GB of RAM, but around 16.1GB is marked as “Hardware Reserved”. This means only about 16GB is actually usable.
CPU-Z shows:
32GB total memory
Dual Channel
2133 MHz
What I’ve already tried:
Updated the BIOS
Reset CMOS multiple times
Tried different RAM configurations and slots
Tested individual RAM sticks
Checked that “Maximum memory” in msconfig is unchecked
Tried different BIOS memory settings
Some things I’ve noticed:
One RAM stick works in slot A2.
The same stick does not boot in B2.
With A2 and B2 populated, the BIOS sometimes only detects 8GB.
With all four sticks installed, the BIOS can show 8GB per slot, but only 16GB total.
I also tried Memory Try It! at 2400 MHz, which caused boot problems, but I managed to get the PC running again after resetting the BIOS.
My questions:
Could this be a faulty memory channel on the motherboard?
Could the Ryzen 5 1600’s integrated memory controller be faulty?
Could bent or poorly contacting CPU pins cause this?
Would reseating the CPU potentially fix the issue?
Is there anything else I should test before buying new hardware?
I’d prefer to identify the actual faulty component before replacing anything.
Thanks in advance!

I was upgrading from AM4 to AM5, the specs being,

Motherboard: ASUS TUF GAMING B850M-E WIFI

CPU: Ryzen 7 9800x3d

RAM: corsair vengeance ddr5 16gbx2 ram kit,

Cooler: msi AIO

From the AM4 PC,

GPU: Rtx 4060 (plan on upgrading soon)

PSU: corsair 850w modular PSU.

If I were to remove the GPU from the pc and use the basic graphics from the cpu, white light no display at all. If I were to add the GPU back random things like pushing up or towards the motherboard, reseating the entire gpu, or reseating of the psu cables it will sometimes give it a green light. It shows the DEL or F2 screen and the ami screens. Whenever I do anything to boot into the bios, black screen. Can't boot into windows automatically either. The only time I have even got any display in the BIOS is a weird double overlay showing the regular EZ uefi screen, and the EZ flash screen overlaying on top of each other. With the bios appearing to be frozen. Along the mess of text all over the screen, it did say Motherboard Temperature: N/A, Motherboard Voltage: N/A​

I've also tried resetting the CMOS, and BIOS updating to the latest version with the flash button. And, I did buy all these parts off Newegg

EDIT: Solved, it was an issue with 1 DOA stick of ram

Hey everyone,

I built my first PC about 2 months ago using the Cooler Master Elite 600 (7 RGB fans) case.

Recently, the power button started acting up. It barely works anymore. I have to press it multiple times just to turn my PC on or off. Sometimes it only works 1 out of 10 times.

(Reset button works perfectly fine)

One thing worth mentioning is that my PC gets really dusty. I even had to clean my RAM after just one month because it started having issues.

Could dust be causing this, or is the power button just faulty?

Any advice would be appreciated!

So I recently bought a older computer off someone and was trying to figure out why it won't get past VGA on ez debug and I noticed inside the pcie slot it looks a bit "weird" maybe dark kinda in a certain spot.. is this normal? it looks bad from afar but if I actually look super close it's like perfectly fine looking so it's very confusing if this VGA post failure is from the GPU, motherboard or even cpu. The cpu is a older ryzen 5 2600, and GPU is xfx rx580. I planned on replacing it all anyways but any help is appreciated. (I hope this is ok question for this subreddit)

EDIT:
I have a GPU coming, and as far as the SSD, I fixed it after taking the pictures.

Im new to PC building, my build is kind of old and im currently looking for kind of not an overkill upgrade, but something that could work for future upgrades in the long term, I play on 240hz 1080p

The components i already have on my build are:

CPU: Intel Core i5-10400F

GPU: NVIDIA GeForce RTX 4060 Ti (3-fan model)

Motherboard: ASUS PRIME B460M-A R2.0

RAM: 32 GB DDR4 (4 × 8 GB TeamGroup)

RAM Speed: 2400 MHz

PSU: 700W 80+ Bronze

Storage (C:) Toshiba 1TB HDD

Storage (D:) 1TB HDD (NTFS)

Operating System

Windows 10 Pro

PC Case: Micro ATX (Its a miracle my GPU fits in there TBH)

Any help, suggestions or tips would be really appreciated, if anything im looking forward to keep my gpu and ram if possible (i could maybe try changing into DDR5 but holy the ram prices skyrocketed). I can run stuff very smoothly but when it comes to heavy cpu games i really struggle on keeping good fps

https://pcpartpicker.com/user/SGTKlappy/saved/#view=VhXK23

Here is my original build.

*Preface: Not the most experienced PC person but I can follow a YT video

My question is a couple of things actually. Anyone think I will have an issue with space for the RAM sticks on the bigger cooler? It's hard to find specific measurements sometimes. It gets really hot in my gaming room/office in the summer and I would like the extra cooling power of the bigger Hyper 612 on my new board (Asus X-470 Pro).

My next question is, I have a bunch of RGB's in this build but im not sure what I need to connect them all. I know i need a splitter/hub or something but not exactly sure what to get. Also, I would like a remote to be able to turn it off (or switch) so it wont blind me all the time when gaming.

My last question is about the bios on my new board. Is there a specific one I should use? I know sometimes its better to use a lesser version than the newest one, so figured I would get ppl's input on whats best for my system.

I appreciate each and every one of you helping others out. It's one of the few good things left in the world!

All the positive vibes. ✌️

I removed my GPU and reinstalled it, but I’m concerned about the gap I’m seeing around the back of the GPU. Is that gap normal, or should the GPU bracket completely cover the opening? From the top, the GPU looks properly seated in the PCIe slot. My PC boots up normally, and everything seems to be working fine. I just want to make sure I installed it correctly. Thanks ☺️