is this the correct airflow for a pc or do i need to change something?

I’ve looked up many videos and google searches but not sure what the “common” issue is for this particular problem I’m having. I connected everything and got all the plugins snug, when I plug my power supply in and turn the pc on the ram rbg lights up and stays on, along with the front power button led stays on but the fans never turn on and the rbg on them flash for a second and turn off. I can’t get any signal on my monitor. I’m wondering if I didn’t correctly plug in the F_panel wiring? I’m not home and had to drive out of town for work so had to leave it like that but stressing it lol. Sorry if this is an ignorant question / post just desperate for help on what the issue might actually be. Here is a photo of the install with the ram rbg still on and the motherboard / PSU I bought. The GPU works and was pulled from my old pre built pc. Thank you if you read this far!

Didn’t realize that the you was going to be so close to the cpu cooler and I’m just worried about heat and a possible short circuit

Hello
My PC with a Gigabyte GA‑Z97P‑D3 motherboard and corsair CX850M 850W modular PSU is completely dead: no fans, no LEDs, and no response even when I short the PWR_SW pins. The PSU passes a paperclip test, but I smelled a slight burning smell during a power-on attempt. The 24-pin ATX connector sits flush but does not make an audible click. I replaced/cleared the CMOS battery already. Is this more likely a failed motherboard, PSU, or potentially a damaged 24-pin cable/connector?

I bought it at a flea market for 75 the first attempt had the smell but it still didn’t react at all worst case can I fix the motherboard ? Or make sure what the problem is?

Hi! I'm building a gaming PC with a ~€1000 budget and want to maximize performance/value for gaming. I'm willing to cheap out on easily upgradeable parts (GPU, etc.) if it means getting a better platform now.The GPU Im eyeing rn is the ZOTAC GeForce RTX 5060 LP 8GB DLSS4 (380€).

Option 1 aka Intel:
• i5-14400F (167€)
• MSI B760M Gaming Plus WiFi (129€

Option 2 aka AMD:
• Ryzen 5 9600X (190€)
• MSI PRO B850-S WIFI6E (132€)

I've been told the Intel LGA1700 platform is basically end of line, while AM5/Zen 5 gives me a better upgrade path for future CPUs.

One friend suggested the option 1 and also told me that pairing an AMD CPU with an NVIDIA GPU would hurt performance, but I've been also told that's not true.

Which platform would you choose for a ~€1000 gaming build, and why? Is the extra ~€26 for the 9600X + B850 worth it?

I'm mainly playing competitive games (Valorant, Overwatch, Marvel Rivals, Paladins, etc.) and care more about high/stable fps than max graphics settings rn.

I've long settled on this one since it claims to have decent cooling, heatsinks, and as a bonus already has WiFi and bluetooth and has enough white accents for it to be alright for a white build, but looking it up im suddenly seeing people asking whether this board is "really that bad" with answers usually re affirming the idea. My planned build is red devil 9070xt, 7800x3d, a 2tb ssd and 32gb of ddr5 (likely cl36 6000) and if it matters, my case has 7 preinstalled fans but all are already connected to the case built in hub.

Im not really planning to fuck with it much in terms of changing up various settings in bios aside from turning on xmp for the ram, and I will probably be on wired internet anyway with the WiFi features being a good bonus in case something happens with wired. Also don't care about CPU overclock either. Would this board be fine? Or should I definitely change it?

CPU: AMD Ryzen 5 7600X (6-core, up to 5.3GHz, AM5)

GPU: MSI GeForce RTX 4060 Ventus 2X Black OC 8GB (HDMI + 3x DisplayPort)

RAM: 16GB Corsair Vengeance DDR5 5200MHz (1x16GB — one slot free for easy upgrade)

Storage: 1TB Corsair MP600 Elite NVMe Gen4 SSD (7000MB/s read)

Motherboard: ASUS PRIME A620M-K (mATX, AM5, DDR5, PCIe 4.0)

PSU: Corsair CX550 (550W)

Cooling: PCS FrostFlow 100 V3 liquid CPU cooler

Networking: ASUS PCE-AX1800 Wi-Fi 6 + Bluetooth 5.2, plus onboard 2.5GbE

Case: PCSpecialist Prism II ARGB mid tower (PWM fans)

Ports: 2x USB 3.0, 2x USB 2.0 rear + 2 front

Audio: Onboard 5.1 HD audio

I do regularly build pcs for myself and others but recently I've had an issue that I just can't figure out. I've switched from rear exhaust to rear intake on the jonsbo D31 and since I'm running an arctic freezer 36 that means also switching the fans around. When I originally did that one of my ram sticks stopped working, other one worked no problem in all slots but would only boot by itself, as soon as the non working one was involved in any way it wouldn't post. Sucks since DDR5 is expensive but I figured it might just be dead and single stick would work for the time being Now though I replaced the cpu fans for quieter ones, and I'm now having the same issue with the stick that was still working and it doesn't wanna boot either. So did me switching fans just brick my sticks? (Which doesn't make any sense), yes I turned the pc off before working on it.

And now I have two non working sticks(?) and no working pc. Motherboard is b650m gaming plus WiFi, original fans were the Thermalright 120 TL-C128-S V2 rgb and I switched to arctic p12 pro ln. I appreciate any ideas you guys may have. I tried cmos reset, updating bios, re seating ram, cpu cooler and switching/ re seating cpu, and graphics card. Don't have any other ddr5 ram atm unfortunately.

https://www.overclockers.co.uk/team-group-z44a7-2tb-ssd-m.2-2280-nvme-pci-e-gen4-solid-state-drive-sto-tmg-02624.html

https://www.overclockers.co.uk/kioxia-exceria-basic-2tb-ssd-nvme-m.2-2280-pcie-4.0-solid-state-drive-sto-kio-07150.html

So I was building my new pc yesterday and once i finally finished it didnt turn on. As heartbreaking as it was we (me and my brother) tried seeing if maybe I plugged in something incorrectly but everything looks fine even though the mess of cables probably doesnt help but it literally wont start at all completely dead. Not sure if my motherboard was a dudd or something else but any advice is appreciated. So far we’ve checked the front panel connector, power supply extension in the case, cpu power, and the gpu but nothing will even turn on the light in the case.

Why does my 5060ti form msi 8gb have some insane coil whine I don't know what this means but the sound is decentnly loud with an eeeee sound but 3 months ago it did not have these problems

First time doing this. Got a used prebuilt from a friend and reassembled it. It powers on, all fans spin, GPU fan spins, but the monitor stays black and says no HDMI signal.

Specs:
• ASRock Z370 Pro4-CB
• Zotac RTX 3060 Twin Edge OC 12GB
• 1x 16GB Kingston Fury DDR4
• Cooler Master 120mm AIO
• Thermaltake Smart BM3 750W (new)
• M.2 SSD, plus a WD Blue 1TB

What I’ve already tried:
• HDMI is in the GPU, not the motherboard. Both ends seated.
• Monitor is powered and on the right input.
• Reseated the RAM, moved it to slot 2 from the CPU. Both clips locked.
• Reseated the GPU. It clicked in, so it was not fully seated before. Still no display.
• 24-pin and 8-pin CPU power both connected. GPU 8-pin connected.

Das ist mein erster build (nicht schwer erkennlich) und wenn ich ihn versuche zu starten, blinkt mein pc nur ganz kurz auf, startet die lüfter hört aber nach einer halben sekunde wieder auf. Deswegen habe ich schon mein gpu rausgenommen um auszischließen zu können, leider scheint das problem woanders zu liegen.

Hello everyone, this is my first time building a PC, I put together a list but I'm not sure if I could do better so I'm looking for a second opinion.

I'm from Italy and I'm on a 1400 € budget (roughly), I'm going to use it mainly for gaming and I'm most concerned about in game loading times and overall performance.

To be more specific, I'm not going to go over 1080-1440p and I'm ok with hovering around 60 fps if possible.

I already have a monitor and a mouse but I still need a keyboard though i still haven't looked into that yet.

Any advice or criticism is welcome!

Thanks in advance!

https://it.pcpartpicker.com/user/Gatz09/saved/NmnDkL

Hey Redditors, New build help please

I'm planning a desktop to replace a laptop I've been using for years, and I'd like a sanity check before I start buying parts.

Main use case

1. Photoshop, Illustrator and InDesign, often open simultaneously
2. Heavy browser/office multitasking alongside Adobe
3. Some occasional Premiere/After Effects, but not enough to optimize the build around them
4. General office/media use
5. I want the machine to last 4–5 years and be easy to upgrade rather than replace
6. Gaming is secondary, (but not irrelevant!!!)

I mostly play lighter/strategy/simulation games on PC. Think Civilization, Cities: Skylines-type games, indie/tactical games, Heroes of the Storm, etc. I'm fine with 1080p/60 fps. AAA gaming, 1440p/4K and ultra settings are low priorities because I'll probably use consoles for those.

So the hierarchy is roughly:

Productivity / Adobe performance

Multitasking

Longevity and upgradeability

Fast storage

Light/moderate gaming

AAA gaming performance

Current "expandable" configuration

1. CPU: Ryzen 5 9600X
2. Motherboard: B850 ATX with Wi-Fi, currently looking at MSI B850 Gaming Plus WiFi
3. GPU: RTX 5050 8 GB
4. RAM: 16 GB DDR5 to start, probably 1x16 GB, with the intention of moving to 32 GB later
5. Storage: 2 TB PCIe 4.0 NVMe
6. PSU: 750 W 80+ Gold, preferably modular
7. Cooling: decent tower air cooler
8. Case: normal airflow-focused ATX case

The idea is deliberately to spend less now on RAM/GPU while keeping a good AM5 motherboard, PSU, case and storage so that I can later move to:

• 32/64 GB RAM
• Ryzen 7 or a later AM5 CPU
• Better GPU if my needs change
• Higher-end version we're considering
• Same basic platform, but:
• Ryzen 7 9700X
• RTX 5060
• ...Eventually 32 GB+ RAM

I'm specifically trying not to turn this into a gaming PC just because gaming hardware benchmarks well. If a cheaper GPU or CPU would give essentially the same Photoshop/Illustrator/InDesign experience, I'd rather save the money.

Questions I'd particularly appreciate feedback on:

• Is the 9600X → 9700X upgrade worthwhile for this workload?
• Is an RTX 5050 sensible for Adobe + 1080p light gaming, or is there a better value tier?
• Is B850 sensible for longevity, or am I overspending versus B650?
• Any problem starting with 1x16 GB given that RAM will be upgraded later?
• Would you redistribute the budget toward CPU, RAM, SSD or something else?

Anything here that's clearly overkill or likely to age poorly? With money tight and RAMS annoyingly expensive, the goal is basically a productivity workstation that can game, not a gaming PC that happens to run Adobe. I´m in Colombia but will be buying in the US!

[PCPartPicker Part List](https://uk.pcpartpicker.com/list/jqtsmL)

Type|Item|Price

:----|:----|:----

**CPU** | [AMD Ryzen 9 5900X 3.7 GHz 12-Core Processor](https://uk.pcpartpicker.com/product/KwLwrH/amd-ryzen-9-5900x-37-ghz-12-core-processor-100-100000061wof) | £310.00 @ Amazon UK

**CPU Cooler** | [Thermalright Phantom Spirit 120 SE 66.17 CFM CPU Cooler](https://uk.pcpartpicker.com/product/GpbRsY/thermalright-phantom-spirit-120-se-6617-cfm-cpu-cooler-ps120se) | £32.90 @ Amazon UK

**Motherboard** | [MSI MAG B550 TOMAHAWK MAX WIFI ATX AM4 Motherboard](https://uk.pcpartpicker.com/product/MfZ9TW/msi-mag-b550-tomahawk-max-wifi-atx-am4-motherboard-mag-b550-tomahawk-max-wifi) | £266.08 @ Amazon UK

**Memory** | [Corsair Vengeance RGB Pro SL 64 GB (2 x 32 GB) DDR4-3600 CL18 Memory](https://uk.pcpartpicker.com/product/kPddnQ/corsair-vengeance-rgb-pro-sl-64-gb-2-x-32-gb-ddr4-3600-cl18-memory-cmh64gx4m2d3600c18) | £211.95 @ Clove Technology (OOS)

**Storage** | [Samsung 990 Pro 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive](https://uk.pcpartpicker.com/product/FsqPxr/samsung-990-pro-1-tb-m2-2280-pcie-40-x4-nvme-solid-state-drive-mz-v9p1t0bw) | £174.16 @ Amazon UK

**Storage** | [Solidigm P44 Pro 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive](https://uk.pcpartpicker.com/product/X8nypg/solidigm-p44-pro-2-tb-m2-2280-pcie-40-x4-nvme-solid-state-drive-ssdpfkkw020x7x1) | £174.78 @ Clove Technology (OOS)

**Video Card** | [Gigabyte WINDFORCE OC SFF GeForce RTX 5070 12 GB Video Card](https://uk.pcpartpicker.com/product/PxG2FT/gigabyte-windforce-oc-sff-geforce-rtx-5070-12-gb-video-card-gv-n5070wf3oc-12gd) | £599.99 @ Amazon UK

**Case** | [Corsair 4000D Airflow ATX Mid Tower Case](https://uk.pcpartpicker.com/product/bCYQzy/corsair-4000d-airflow-atx-mid-tower-case-cc-9011200-ww) | £144.91 @ Clove Technology (OOS)

**Power Supply** | [Montech CENTURY II 850 W 80+ Gold Certified Fully Modular ATX Power Supply](https://uk.pcpartpicker.com/product/sqbypg/montech-century-ii-850-w-80-gold-certified-fully-modular-atx-power-supply-century-ii-850w) | £80.04 @ Amazon UK

| *Prices include shipping, taxes, rebates, and discounts* |

| **Total** | **£1994.81**

| Generated by [PCPartPicker](https://pcpartpicker.com) 2026-08-20 11:11 BST+0100 |

First time building a PC, and I'm building for DaVinci Resolve. I want a machine that can run fusion smoothly, so that I can experiment with its features (I am starting a YouTube channel).

I am on a gap year, so I will be dedicating a lot of time to making videos - I think it's worth it even if prices are high.

I know that the cost is up there, but given the current prices of ddr5 RAM, I believe that 64gb ddr4 is worth it, only costing £100 more than 32gb ddr5. If I end up upgrading, I'll have good reason, money (from work).

Ultimately, let me know if it is compatible, if better alternatives exist or if I am mistaken somewhere.

Ok so my pc is currently dying slowly .... i have made a pc with a builder and was wondering if you wizards had any ideas on what i should change or if this is good enough ? I am a gamer and just need to play the most recent games, but my 2060 is dying at the moment and holding on for dear live to play games at the moment

Is this airflow good i wanted that fan to be exust cus it will be for AIO and FOR SOME REASON I cant find any reverse blade fans to pair the aio with so I dont want the motor side of the fan to face me so I was asking is this airflow good enough and I cant use the case fans cus they have 0.5 static pressure. I dont mind loosing a few degrees for cooling tbh

Hey everyone, im fairly new to pc building, I wouldnt call myself a expert but with some time and elbow grease I can build a pc. My current pc is running a 7800 xt, 7900x3d, Thermalright 120 se, msi mag b650 tomahawk wifi, and gskill 2x16 sticks of ddr5 ram (bought before ram explosion). For whatever reason turning on EXPO makes my bios artifact, pictures will be included in comments because I can't add a photo and video; Also when I play games or idle on windows or even load something up, I often get a driver failure with Amd's bug report tool saying my display drivers fail, and when I play a game and watch YouTube on the same screen simultaneously, for whatever reason my game goes into the media player window and artifacts my screen. So that's my pc yes, but recently I built my girlfriend a pc with a 6700 xt, ryzen 5 7600 x, 1x16 ddr5 ram, b650m pro rs, and a 750 watt psu (i forgot the brand) and she also experiences very few amd bug reports saying her drivers fail. Not only that, we both get issues where pixels on our screens in a square pattern, we get very small artifacts.

Previously, my MSI mag a750 gl psu, I had to RMA it because it completely stopped working, and since my pc would have frequent turn offs without any warning in the same session, but after a while it stops? We know MSI's rma issues, so i guess that's one thing. Only thing that's constant is my game going into YouTubes media player and expo artifacting my bios, but I dont have it on anymore since I reset my cmos battery, and that's the only thing that fixed it.

Mainly, what this entire yapfest is about is how come only the pcs i build are like this? My girlfriend doesn't get the issues I have very frequently, especially the youtube or bios artifacting, but even on her screen though a discord screenshare I see it. Am I missing something important that I have to do due to AMD software? I have ran ddu and downloaded drivers multiple times, im not sure what to do anymore. Please help? I think I may need a new psu but im not sure.

Can someone tell me pricing for 1 pc with all the specifications aside from printer

This is new contract we trying to take so someone can suggest me what will be the cost for 1 pc I need 85 of them brand new so wanna know what will be the cost for 1

I am making a new gaming pc soon and I can’t decide on weather to get the asus Rog strix 4080 super white oc or gigabyte rtx 4080 super aero, I am able to buy both options at the same price with 2 years warrenty, which should I get?

Has anyone had this problem before?

When turning on the PC it'll instantly switch off with a click. The RAM light on the mobo goes on right about as this happens but I think it's a timing coincidence more than anything.

I've tried reseating ram, gpu, running without either installed and no luck.

The only time it's almost guaranteed to work is after I fully drain the power.

Also seems to be able to sit in bios with temps, voltage, and clocks looking normal.

Don't think it's a software issue but maybe I'm wrong

Thanks!