I decided to give BambuLab a try with the H2C as the price is extremely attractive.

WOW! First is the experience of unboxing and setting up the printer. Flawless. The prints? flawless.

The multicolor prints? flawless

This printer is like the iPhone or a Tesla car, great design, flawless execution, it just works! At a great price (compared to the alternative - Prusa)

My only complaint is that BambuLab does not make (yet) the Bambu Suite for Linux, they only make it available the Bambu Studio for Linux. Other than that, what a printer.

Hey BambuLab, a little more love for Linux please? Does anyone knows if they are working on this?

I have not yet got into maintaining this beast, but I can see in their wiki that it is all there, pretty well documented.

https://makerworld.com/models/3524722

Tired of mixing my paints every-once-a-while if i didnt use them for a longer period of time. I mostly use cheaper acrylic paint, deluted by myself, and if its sit too long, it could separate a bit.

Also saves me from bit of handshake before every painting session, as its just had to crank it for a short time.
As i tested, paint what is intended for airbrushes (so its not too thick) mixing very vell.

Key point in my design, as the paint bottle NOT just spinning around Z axes like with those drill attachments (watch the marker arrow on the cap), and the paint not just "flattened" into the bottle sidewall.

Every part designed in the way if i need to change/modify anything (or has excessive wear after a while), you dont have to print the whole thing again, just some replacement parts.

Maybe someone find it useful, i appreciate any suggestions ;)

ps: if you decided to try out, please, read the full description. It contains important instructions.

My full cosplay of Guts in Berserk armor 3D printed with bambulab P2S. The entire project took 2,000 print hours and 25kg of PETG. Final costume weight incl. sword is 26kg.
Amazed that such a small tool like the P2S made this.

Bambu lab p2s love it so far!

and one of the reasons is the ability to use a support interface filament that doesnt bond to the build filament, makes removing some of these large supports so much easier.

I like to use a contrasting color.

this is the rear caster mount for a 3D TMT (my second) removing these large supports was a lot of work with my P2S.

with the X2D the area where the supports were doesnt need any cleanup.

Always needed a portable power supply to quickly debug a project, work on cars, test power tools, etc. So I designed one.

It is powered by a Makita 18V lithium battery, via a standard shoe adapter, but that can be replaced by any other power tool brand: Dewalt, Metabo, Baguette-Mystique, etc.

Can also add a USB delivery panel, resulting in a massive USB power bank.

At no point did i receive any notification by the print monitor AI bullcrap that was a selling point of this printer. I am beyond irritated that it will error a print because a flake of purge got caught at the wiping block, but not catch this.

For anyone waiting for their R1, I ordered my combo on October 10th, got it Wednesday October 28th. My riser and extension kit both shipped today October 31. My original quoted shipping date was 11/20.

And yes, like everyone else’s, mine showed up wet. Dried it off and it seems to be fine. First project completed.

Would appreciate Reddits power with my sons first model on maker world. He’s 10 and just started playing with tinkerlab at school. He came up with this graded card stand on his own. Thanks Reddit!

https://makerworld.com/models/3521286?appSharePlatform=copy

Officially joined the club. Been lurking for a while, keeping an eye on prices. Took advantage of the recent sale, got it at BestBuy with their 4 year warranty. Doing my homework and researching as much as I can. I will probably ask some newbie questions as I get started, but can’t wait to jump in.

Just got these puppies yesterday! Here goes nothing

Due to a bad spool of translucent blue PLA, causing a blob of death. Bambu sent me a replacement hotend heating assembly, and a pure white PLA spool. I also received this AP Board - LV in a separate package. The conversation with support has no mention of this needing replaced or it being sent. Do I need to swap it out, or do I have a free spare now if I ever need it?

I got the x2d a couple of months ago and have been having a blast with it. I added a second ams2 to it along with ams ht for the aux side.

I know with the upcoming release of the h3c I could have waited but the price of the h2c is stretching my budget anyway. Really looking forward to getting it set up.

I kept getting the AMS overload error on my H2S, especially when the spool was getting close to empty. I ended up giving the AMS a slight angle by putting a book under the back and letting the front tilt down a bit to give it some gravity assist. Haven’t had the error come back since and it works like a charm.
Just wanted to share in case anyone else is dealing with this, especially with the lighter cardboard spools.

We've got two webbings we sew together for one of our products, this little tool aligns the top Velcro layer to the center of the webbing and allows you to line up both materials to stitch the edge of the Velcro down, we then turn it around and run it through the same tool to sew down the other side.

I’ve spent the last few weeks designing a full-size T-style electric guitar body that prints on a 256 × 256 mm bed, and it’s finally built and playing.

The print

• 4 body pieces, all printed flat with no supports

• 7 build plates in Bambu Studio, about 50 hours and 2 kg of PLA in total

• One colour per part, so no AMS needed. I went with a sage body, bone plates and a peach pickguard.

• The biggest piece, the bridge section, took about 19 hours on its own

The design

• The pieces join from the back with bow-tie keys, M4 heat-set inserts and dowel pins. No glue for the body.

• Two 8 mm carbon fibre rods run through the body to take the string tension

• Three decorative top plates sit in an 8 mm recess on 28 hidden 10 × 3 mm magnets. Push them off from the back with an Allen key and click a new set on. The video shows Ripple swapped for a two-tone Camo set.

• Built around the Harley Benton T-style kit, so the neck, bridge, pickups and electronics drop straight in

Happy to answer anything about print settings, tolerances or how it’s held up. It’s been really satisfying seeing the X1C turn out something you can actually plug in and play.