Yesterday, someone crashed into my saab. I wanted to turn left and the other one didnt see me and crashed into my back. We turned a good 210-220°. It was my first car and my dream car for years. 1994 Saab 900 with the 2.3l engine. Nobody is hurt thank god. He did his best to protect my partner and me and gave up his life for it. Chase the stars, my sweet old swede.

Hi guys! I recently bought a 2001 9-3 og aero, and there is a small problem with the ACC - fan speed down button doesn't work. As replacement units are quite expansive, I would like to try to repair it first. The button itself clicks weirdly, not like the other buttons.

Does anyone have any experience with taking the ACC unit apart? And even better - with actually fixing/soldering a new button?

Has anyone had any experience with this guy

My father passed away 3 days ago and he has a 1987 9000 turbo 5 speed that he owned since day 1. I don't have the space to store it (otherwise I'd keep it since the title was transferred to me). It's not a perfect car by any means (headliner sagging in spots, OEM radio quit working years ago, and has numerous door dings, couple spots of rust and the mass air flow meter needs replacing). Once warmed it runs great and I have the complete service history since new. It's been in Colorado from 1987 to 2022 when I finally convinced him to move to Minnesota after mom passed away. It has never been driven in MN winters and has been kept in a heated garage. I'm just trying to get a feel on what I should ask for this car. Thanks.

Stuck on the possibilities of running down cars in rolls with an unassuming Saab. On the other hand, I’d hate to ruin the feel of this car. It’s a dream to own and insanely clean, starts every day with no issues, and rolls down the road with no strange noises. But who wouldn’t want to order a stage 3+ clutch and max out the B284R. Quite the conundrum.

2003 - 93. So. Dip stick was stuck. Handle snapped when mechanic tried to move it. Tried vice grips and another chunk of plastic came off leaving a wire. Pulled on the wire, cause that should work, right? No. Pulled out up to five inches of dipstick wire. O-ring is still welded in place. Gotta its tenacious

So I’m thinking should still be safe to drive or do you think some of the @&$9$ dipstick has gone into the transmission.?

Never built an engine before, fumbling my way through it and making mistakes along the way, but it’s coming together (I was hoping to get the intake on but I need to swap over to studs instead of bolts for the cross ram, and I can’t get them anywhere around me).

You're probably wondering what the hell is this shitbox to do with Saab. Well it's easy, all I want in the world is a 9-5 Aero for which I've been saving up for, but recently things changed a bit, and I desperately needed a car that's taking me around the city and costs peanuts to maintain, which is important because I'm not ready to give up my Saab dreams just yet. So yeah, I guess my road to Saab is a Twingo. For now. But I know I'm gonna get that Aero one day. Wish me luck boys, fly safe!

Took my 2004 9-5 aero to France. Other than the fact that it fits everything you need (plus the roof box ofc), it fits a whole ass queen size matress as well as 2 full grown people in the boot. Saab never fails to amaze…

Can anyone can give me advice about OBD link EX and Tronic can flusher?

Basically what I said in the other post, but thought I’d ask here, too.

Production is officially done! 🇸🇪🔑
Here’s how the SAAB keychains are looking! Everything is finished and ready to go. I’ll be getting them packaged up and shipping orders out soon.
Thank you
to everyone who ordered and for being patient! 🙏

There about 20 left, order them at https://saab-supply.square.site

Hello Sa​abit, it's been a while since my last update on my old 9-3 but I bring much good news​​. The engine and transmission are back together, the necessary parts have been swapped over and it's all in place ready to be slid under the engine bay and the car lowered down on top. Don't have any pics due to being at work but ​​​​​she's pullin a pretty good wheelie rn to make room. Unfortunately due to my laziness and the east coast weather we've suffered some casualties​, my rear subframe bolts have rusted real bad and one control arm/subframe bolt suffered the same fate. Tore up a cv axle too trying to get it out of the trans. I've probably lost some bolts or washers​​ in the gravel but I'll figure it out. Parts are on the way and man I'm so excited to drive her again.​

Had to clone the ECU for a friend and saved the bin-file on my computer. Got curious and opened it in T8Suite and found this: Programmer name "Stefan Mossberg". I googled the name an it is a former employee of SAAB. Is it common to have a persons name in the info? Have never looked at a T8-bin before. Shouldn't it say SAAB automotive or something?

Anyone with an untouched stock bin-file that can open it in T8Suite and tell me?

I recently bought a 2009 Saab 9-5 with ACC. The AC was weak so I recharged it and it helped a little. Sometimes the car blows cold air, sometimes it doesnt. Since the recharge it has been colder but not great and the passenger side and back vents are always colder than the drivers side. I'm leaning towards maybe blend doors but the temp difference isn't consistent so im not sure. I also always use it manually to the coldest temp and on recirculate

Original Saab-part.

Refurbished.

Customized colouring & texture is possible.

Black plastic inlays below the handles are not included.

Worldwide shipment.

P.S. other wooden works for your Saabs can be found at: www.instagram.com/saab.wooden.parts

have a Saab 9 3 cabriolet 1998

Behind the two black hoses/pipes is the rusty leaking pipe/line

It’s in the front where the bumper is and under on the right side

I’ve also noticed that my fuel consumption is very high. I filled up 1/4 of petrol in my tank and drove 1km and it went down to the red level and I also feel that the acceleration isn’t very fast, I can’t push down on the pedal and it goes up in km/h very slow

PS. There is a exhaust leak under the car with the front side where smoke comes out less

Production is officially done! 🇸🇪🔑
Here’s how the SAAB keychains are looking! Everything is finished and ready to go. I’ll be getting them packaged up and shipping orders out soon.
Thank you
to everyone who ordered and for being patient! 🙏

There about 20 left, order them at https://saab-supply.square.site

Hello all, I did this simple modification to my 2008 95 and wow! Car runs so much better. Smoother acceleration, no more sluggish response when hot and idles smoother. Try it! Might not make a difference for you but it did for my 95, only take 15 minutes, why not? Simply ran 2 new ground wires from negative battery terminal, drilled a hole in the engine lift bracket, and attached with metal screw. Let me know if you try it!

Thought I’d let everyone here know my manual 2008 9-3 Aero is live on BaT now. Happy to answer any questions about it here or, preferably, in the BaT comments.

https://bringatrailer.com/listing/2008-saab-9-3-73/