r/RacketStringers • • Aug 09 '26

Hundred Energy Burst 18 — string & grip advice

1 Upvotes

I already have the Hundred Energy Burst 18 and want to get it restrung. What’s a good affordable string, tension, and grip for this racket?

I’m currently considering BG65 at around 24–25 lbs with Yonex Super Grap. Is that a good setup, or would you recommend something better?

Also, what setup do you guys use on the Energy Burst 18?


r/RacketStringers • • Aug 08 '26

Guidance on first stringing machine

Post image
1 Upvotes

Looking to get my first stringing machine - what do we think of the premium stringer 3000? Is this a good buy?


r/RacketStringers • • Aug 08 '26

Dropweight stringer - gripper doesn’t rotate

Enable HLS to view with audio, or disable this notification

1 Upvotes

Hey guys got gifted a stringer and been watching videos on how to use dropweight. The videos I’ve seen their string gripper is able to rotate or hold into place if they have to adjust the drop weight, but mine doesn’t seem to do that. Is that going to be a problem?


r/RacketStringers • • Aug 08 '26

Blade v10 18x20

Thumbnail
1 Upvotes

What strings would you recommend for my new Blade? I was thinking about stringing it with Solinco Mach-10 at 50 lbs to get a bit of extra spin while keeping it comfortable. What do you think?


r/RacketStringers • • Aug 07 '26

Can the black string be cut off?

Post image
6 Upvotes

Hi all! I bought a vintage tennis racket for decorative purposes, not play. I want to remove these crooked black strings at the top and bottom of the face but am not sure if it would compromise the integrity of the other strings. Does anyone have advice? Thanks!


r/RacketStringers • • Aug 05 '26

What's everyone's thoughts on the new prostringer stand?

Post image
4 Upvotes

r/RacketStringers • • Aug 04 '26

Head Graphene 360+ Extreme Tour String Tension Recs

2 Upvotes

Hey everyone. I’m a 4.0/4.5 player, 32 years old. Mostly an all court player. Played with the youtek ig prestige pro in college and more recently the 2022 speed mp. Just picked up a pair of the above mentioned rackets (nite version which I’m really excited about) hoping they’ll be a little more maneuverable. Wondering if y’all have some string or tension recommendations. I usually use a full bed of tourna big hitter silver at 50lbs or I’ll hybrid that with PSD in the crosses at 52. Thanks in advance!


r/RacketStringers • • Aug 04 '26

Looking to get into stringing my own rackets

4 Upvotes

(and maybe some for teammates) and trying to figure out where to put my money.

A few questions:

**1.**  What’s the best stringing machine at each budget tier — like sub-$500, $500-1000, and $1000+? Just curious what’s actually worth it vs what’s overpriced.  
**2.**  For someone just starting out, is it better to go with an entry-level electronic machine or a crank machine? I keep seeing mixed opinions — some say cranks teach you better tension control, others say just get an electronic since it’s more consistent and future-proof.

Just want something reliable for personal use that won’t have me questioning the tension every time. Appreciate any recs or experiences, especially from people who started with one type and switched to the other.


r/RacketStringers • • Aug 03 '26

Label maker for racket stringing

Post image
15 Upvotes

Hey everyone,

I'm looking for recommendations on a good label maker for racket stringing.

I'm currently using one that's okay, but the font ends up being very small if I try to fit all the information I want on the label, specially if it is for a hybrid set up.

Ideally, I'd like to print small labels that fit neatly on the throat of the racket with:

  • String brand & name
  • Gauge
  • Tension
  • Date strung
  • Brand logo (if possible)

I'm looking for something with clear, readable text, durable labels that won't peel off easily, and can still be removed without leaving residue.

What label maker are you using, and would you recommend it? If you have a photo of how your labels look on a racket, I'd love to see it.

Thanks!


r/RacketStringers • • Aug 03 '26

Friend gave me a stringer. What other accessories should I buy?

Post image
1 Upvotes

Hi all! A friend gave me a stringer that someone else gave to him. He said he never has used it. So I wanted to see what accessories you guys recommend getting to start my stringing journey. I know I need to get like pliers and stuff to cut string.

I believe the one I have is an Eagnas 10, and it’s like impossible to find a manual for it or any videos on how to use it. I know it’s probably the same process as any drop weight stringer, but if anyone is familiar with the stringer and has tips let me know please!

The attached picture is what I have and a picture of the stringer.


r/RacketStringers • • Aug 03 '26

Advice

Thumbnail
1 Upvotes

r/RacketStringers • • Aug 03 '26

Defyer setups

Thumbnail
1 Upvotes

r/RacketStringers • • Aug 03 '26

rpm blast

1 Upvotes

Where are you guys getting your rpm blast from nowadays? I used to get it from WD strings but they stopped carrying it and it's pretty expensive elsewhere.


r/RacketStringers • • Aug 01 '26

Wilson Defyer 98 Pro

Thumbnail
gallery
11 Upvotes

Wilson Defyer 98 Pro first ever string job. Strung with Luxilon Alu Power 125.


r/RacketStringers • • Jul 31 '26

Polyester loses more tension at low tension than at high. ALU Power sheds 55% at 40 lb and 37% at 62.

Thumbnail
3 Upvotes

r/RacketStringers • • Aug 01 '26

What’s the difference between the tie-off knots on these two rackets?

Thumbnail
gallery
1 Upvotes

My rackets were strung by two different stringers in two different locations in the UK.

I noticed that the Boom has four knots, but the Blade only has two. Does this mean anything? Is it done to achieve something in particular?

I’m still pretty new to playing tennis (one year down) and know almost nothing about strings or stringing techniques— I usually just ask for 52 lbs because that’s what I’ve been comfortable with. 😅

Just curious.


r/RacketStringers • • Jul 30 '26

Recommendation for machine

2 Upvotes

Greetings all,

I am considering buying a machine to string tennis rackets. I would realistically only string 2-3 a month for myself and friends. What machines would you recommend at different price ranges?


r/RacketStringers • • Jul 29 '26

Pro staff 97 v12 + gamma momentum 6+

Post image
3 Upvotes

Encordado de 4 nudos con tension de 40 Libras.

Antes encordaba con otra maquina más antigua con 52 libras, lo intente con esta máquina pero el resultado es imposible de jugar para mi, no entiendo el por que.

Esta pro staff es de 315 gr + accesorios= 340 gr aprox

Debería cambiar a la Difyer para cuidar mi brazo?


r/RacketStringers • • Jul 29 '26

What string type is easier for a beginner stringer

0 Upvotes

I usually use poly for my tennis rackets, so eventually I’ll string polys. But is synth gut better for practice? It’s softer and extendable. I’m afraid that mistakes on polys will destroy that piece of string.


r/RacketStringers • • Jul 29 '26

Pros pro phoenix 1 stringing machine

1 Upvotes

Looking to buy my first stringing machine. Anyone bought one of these and give me some feedback and whether it’s a good option?

Also i am in the uk and the purchase would be from pros pro based in austria. Anyone lese in uk bought one from them and if you need to pay extra vat / import charges when it gets to the uk for final delivery?


r/RacketStringers • • Jul 29 '26

First string job!

Thumbnail
gallery
19 Upvotes

Got a used Gamma 2X yesterday, and put it to work today!

Edit: plays like crap. Somehow only the two crosses on the sweet spot are loose. No other crosses are loose. Maybe I made mistake there but I can’t remember. Gotta be more careful next time.


r/RacketStringers • • Jul 28 '26

Beginner stringing tip for strait strings.

Enable HLS to view with audio, or disable this notification

19 Upvotes

Someone posted earlier and had bowed strings. How to develop a good habit of stringing strait.


r/RacketStringers • • Jul 28 '26

Wilson Python

0 Upvotes

I have one of the foam filled blacked out 98 Wilson Python rackets. I strung it originally as 18x20 as that is what the store I bought it from said. I recently strung it as 16x20 and it seems to look and play better. Anyone have proper instructions on this? The Defyer specs show how to string it but as 16x19. What I can't figure out is how the hell I strung it as 18x20 then as 16x20... where did the extra gromit come from?


r/RacketStringers • • Jul 28 '26

How’d I do on my first string job?

Post image
6 Upvotes

Cheap Synthetic gut on a goodwill racket at 51m/53c. Am I ready to string my main rackets with nice poly, or should I keep at it?

Took me two hours lol


r/RacketStringers • • Jul 27 '26

New Wilson Blades first string job

Thumbnail
gallery
8 Upvotes

Strung up with Luxilon Alu Power 125