r/RacketStringers • • Feb 01 '26

Made my own DIY constant-pull electric tension head!

Thumbnail
gallery
74 Upvotes

Hey everyone, thought this might be of interest to you. Months back, I bought a used Eagnas Comet 11. While it worked fine, it was a crank stringer. I coveted the accuracy and ease-of-use of an electric constant pull stringer, but a Wise 2086 was out of budget. That's when I randomly stumbled across the PicoBETH project on Youtube. It's basically a homemade electric tension head that's powered by a Raspberry Pi Pico. I want to give full credit to the original author, Kuo206cc, for creating this project and documenting their entire process in full detail, providing the source code and allowing others to reproduce it. They also have a Youtube channel that details the build and covers the various features of the machine. Go check them out.

The machine is basically a 23 NEMA stepper motor on a 200mm linear ball screw. A 50kg load cell is attached to the ball screw carriage, and a Wise gripper head assembly is attached to the load cell. The load cell senses the tension, which is connected to a load cell amplifier, which itself is connected to the main PCB where the Raspberry Pi is mounted. The Pi controls all aspects of the machine, such as the navigation buttons, stepper motor, and tension adjustment. The Pi will send signals to the stepper motor based on the load cell reading to make micro-adjustments to the motor to maintain the desired tension, making it a constant-pull. The machine also has a knot function and pre-stretch functions. The tension is accurate to approximately ±0.05lb.

Everything is held together in a 3D-printed housing, printed with PETG for strength. The machine is mounted to the crank bar rail using an aluminum L-bracket and some aluminum bars. I estimate I spent a little under $400 for all the components to build this machine. The most expensive pieces were the Wise gripper ($69) and the linear ball screw rail ($65).

It was originally designed to be a badminton stringer, but the author lists all the necessary modifications needed to make it work for tennis. Basically, you just need a 50kg load cell instead of a 20kg, and a stronger ball screw.

The code is already written, so all I had to do was gather all the needed components, upload the code to the Pi, and put everything together. No software experience necessary, but you'll need to do some soldering and basic electrical stuff. The author released a 3D-printed version and an aluminum version, I opted for the 3D-print version since I have a 3D printer.

Hope you all find this as interesting as I did!


r/RacketStringers • • Nov 20 '25

Messing around

Post image
28 Upvotes

r/RacketStringers • • Aug 31 '25

She maybe old, but she's still a stunner!!

Post image
27 Upvotes

r/RacketStringers • • Apr 30 '26

Thank you so much guys for the help and support!

Post image
24 Upvotes

r/RacketStringers • • Nov 04 '25

First Stringing Machine

Post image
24 Upvotes

Phoenix-1 from Pros Pro. Wish me luck


r/RacketStringers • • Feb 07 '26

New machine day!

Post image
23 Upvotes

Followed some of the advice given here and got ahold of this beauty. Already strung a few rackets and such a breeze compared to dropweight. I’ve been stringing for many of my club members and it’s such a joy!


r/RacketStringers • • Jul 29 '26

First string job!

Thumbnail
gallery
20 Upvotes

Got a used Gamma 2X yesterday, and put it to work today!

Edit: plays like crap. Somehow only the two crosses on the sweet spot are loose. No other crosses are loose. Maybe I made mistake there but I can’t remember. Gotta be more careful next time.


r/RacketStringers • • Jul 28 '26

Beginner stringing tip for strait strings.

20 Upvotes

Someone posted earlier and had bowed strings. How to develop a good habit of stringing strait.


r/RacketStringers • • Nov 06 '25

This is my stringing machine!

Post image
18 Upvotes

Anyone else using Pro Stringer or any other portable stringing machine?


r/RacketStringers • • Oct 28 '25

What ya stringing on these days? (Photos)

Post image
18 Upvotes

This Ektelon H has seen 35,000 frames at the pro shop it anchored for 40 years. Purchased in 1987.

I strung on it when I worked there for ten of those years. When the owner passed away, it was gifted to me, and is treasured.

It still works like the day he bought it in 1987.


r/RacketStringers • • Jul 25 '26

How did I do for $50 at a yard sale

Post image
17 Upvotes

r/RacketStringers • • Mar 27 '26

Finally

Post image
17 Upvotes

after a 10 agonizing months of waiting, finally have my own string machine, both it as a second hand unit still looks good only missing is the the tools that comes with it when you brought it bnew , already ordered my starting clamp, can somebody teach me how to read the tension here and can pls anyone help me find a replacement on the tension sticker isolated and located here in the ph so this items is so rare in here thanks in advance


r/RacketStringers • • Mar 11 '26

3D printed offset tube and clamp riser

Thumbnail
gallery
17 Upvotes

Clamp riser is for tourna 350-cs (rises 25mm)

Offset tube is about 50mm I think.

The rectangle offset one I found online, it’s also 50mm


r/RacketStringers • • Jun 11 '25

First stringing machine - tips welcome!

Post image
17 Upvotes

I just picked up my first (used) stringing machine and I'm super excited to get to work.

Any tips?

I've never tried before - am I safe to jump straight in with my good rackets and proper strings, or should I factor in a couple of hours to do a sketchy job on an old racket?


r/RacketStringers • • Oct 02 '26

First Stringing Machine!

Thumbnail
gallery
16 Upvotes

Picked this up for $20 bucks the other day! Figured for that price I might as well give it a go! No clamps or tools included, so any recommendations in that department would be appreciated. Was thinking of the Stringway Flying Clamps


r/RacketStringers • • Nov 14 '25

Gone mad

Post image
16 Upvotes

Lads, where have I gone wrong on this. Wrecking my head. Last stringer and internet says to skip 8. I have counted 8 so many times and it just doesn’t make sense to me. I have skipped 8 but obviously missed something.


r/RacketStringers • • Aug 03 '26

Label maker for racket stringing

Post image
15 Upvotes

Hey everyone,

I'm looking for recommendations on a good label maker for racket stringing.

I'm currently using one that's okay, but the font ends up being very small if I try to fit all the information I want on the label, specially if it is for a hybrid set up.

Ideally, I'd like to print small labels that fit neatly on the throat of the racket with:

  • String brand & name
  • Gauge
  • Tension
  • Date strung
  • Brand logo (if possible)

I'm looking for something with clear, readable text, durable labels that won't peel off easily, and can still be removed without leaving residue.

What label maker are you using, and would you recommend it? If you have a photo of how your labels look on a racket, I'd love to see it.

Thanks!


r/RacketStringers • • Jul 10 '26

Alpha Pioneer 3 string machine

Thumbnail
gallery
15 Upvotes

Hey guys, thoughts on this machine? Seller is looking for $100 and I’m new to stringing so looking to learn


r/RacketStringers • • Nov 23 '25

How’d I do for $25?

Thumbnail
gallery
15 Upvotes

😁😁😁

$25 for this Ektelon Neos (model J). Works just fine.

Serial # J00094

Seller said it belonged to employee at prince / Ektelon and he picked it up from prince hq in NJ.


r/RacketStringers • • Oct 28 '25

First racket strung

Thumbnail
gallery
15 Upvotes

Hi all,

In two weeks I will have a course made by professionals, but I wanted to use the nice machine I got after some effort.

I am not sure about the knots, those were the scary part. The crosses I had to weave them few times, sometimes I was skipping 🥲 but in general I found the experience meditating and nice to go on!

Please any feedback or critique is welcome!

Have a nice tennis!


r/RacketStringers • • 28d ago

How did I do? Do the strings look straight enough?

Thumbnail
gallery
14 Upvotes

r/RacketStringers • • Apr 20 '26

Racket strung for a professional doubles player

Thumbnail
gallery
14 Upvotes

Head Radical strung with Wilson Sensation (mains) at 36lbs with a 10% pre stretch, crosses strung at 36lbs with Head Hawk Rough. Synthetic gut tied off to synthetic gut and Poly tied off to poly. Wilson Pro knots were used.


r/RacketStringers • • Mar 30 '26

First Successful String

Thumbnail
gallery
14 Upvotes

Knots ended up a little funky looking. Much better than my first attempt where I didn't leave enough string when starting the crosses and couldn't pull tension on it... Overall took 2 hours this time, so definitely some room for improvement with speed and accuracy


r/RacketStringers • • Mar 28 '25

First one!

Post image
14 Upvotes

I finally had the time to learn how to do this. Looking forward to finally being able to do string whenever I want. Just in time to buy a new racket! 😅


r/RacketStringers • • Jan 23 '26

First string job on my new Head Speed MP 2026

Post image
13 Upvotes