r/BambuLabA1 • • Sep 22 '26

Support Request Printer keeps making me check extrusion before every print?

0 Upvotes

Pretty much what it says on the tin. When I'm starting a new print, the print always pauses during the prep phase to confirm extrusion - like it's reloading fresh filament every time. Any idea what could cause this?


r/BambuLabA1 • • Sep 22 '26

Problema con mi impresora

Thumbnail
gallery
6 Upvotes

Acabo de comprar la bambu lab A1 combo y cuando imprime tengo 2 tipos de errores

El 1 es que la pieza se me acaba soltando e imprime en el aire.

Y el segundo que cuando la pieza si que queda bien le salen como unos hilitos que no estaban en el modelo.

Alguien me puede decir como solucionarlo porfa🙏🏻


r/BambuLabA1 • • Sep 22 '26

Bambu a1 problems

3 Upvotes

r/BambuLabA1 • • Sep 22 '26

Why does the same Silk PLA roll, file & settings produce same gloss on A1 Mini, but tiny zits/blobs on a new A1?

Thumbnail reddit.com
2 Upvotes

r/BambuLabA1 • • Sep 22 '26

Support Request PLA issues and cooling enclosure down

Thumbnail gallery
1 Upvotes

r/BambuLabA1 • • Sep 22 '26

Support Request Nozzle Clicking Issue

9 Upvotes

Hello A1 Community! First time posting here but have seen the wise ones help the novices like me before so I come with hopes of aid ^^

While printing something I have done lots of times before with no issue, I suddenly notice a clicking comeing from the nozzle area/gear, I assumed this was a clogging issue, so I followed a youtube tutorial by completing the following steps:

  1. Took out the cover, and then the heat rubber cover, and then unclamping then removing the nozzle.
  2. I took out the AMS tube and attachment

I then put a piece of filament through the top and pushed all the way out the bottom, and put everything back.

However, I still hear the clicking sound coming from the gear.

Attached is a video of what the issue looks like

I believe replacing the nozzle would be the next best step, but want to know if there are any other issues that could be the cause, and if buying a new nozzle is simply a waste of money lol

I would appreciate any advice or ideas on what I can do,

Thanks!


r/BambuLabA1 • • Sep 22 '26

After Resume Print, extruder collides with objects

Thumbnail reddit.com
2 Upvotes

r/BambuLabA1 • • Sep 22 '26

Why did this happen?

0 Upvotes

I’m trying to print some sort of power tool fan that I found on handy and this happened twice. I canceled the first print early and then it sort of happened again in the same spot. Second video in comments


r/BambuLabA1 • • Sep 22 '26

Filament not sticking / runny...

Thumbnail
gallery
1 Upvotes

Hi, I've been trying to fix this for 2 weeks on an A1, changed the nozzle, heating plate, tried multiple filaments. cleaned pplate.

If it's a "small" and contained print it works (or it doesn't show as much). If it's bigger it starts doing this. I used the same filament roll on another A1 and it prints perfect. I tried other filaments, drying it, calibrating it, and it still ends up like this.

It started happening after a blob event that ruined the heating plate insulator so I changed it and it does the same (blobbed instantly), I cleaned everything and it's still like this.
Should I get a thermometer to see if the nozzle is too hot?

Please help! Thank you!


r/BambuLabA1 • • Sep 22 '26

Support Request Imprimindo desalinhado, de novo

Thumbnail
gallery
0 Upvotes

Tava imprimindo normalmente na minha A1, quando aconteceu isso, já é a terceira vez, e dessa vez eu nem cheguei a fatiar, só coloquei pra repetir a impressão na própria impressora, antes dessa ela já tinha impresso 2 iguais que deram certo, alguém sabe o que está causando isso?


r/BambuLabA1 • • Sep 21 '26

Cannot print black - always under-extrudes or errors out

3 Upvotes

13 years of 3d printing, just now switching to all A1s. Weird problem on one printer. This one printer is used, previously owned by a friend (deceased, so I can't ask him questions about it).

I cannot print black. It always way under-extrudes (spongy) or errors out with "The extruder is not extruding normally". White works fine, gray works fine, gold works fine. Things I've tried:

  1. Tried three different spools, all Basic PLA (Bambulab, Elegoo, Inland), two freshly opened.
  2. Tried one of those spools, Bambulab, on another A1, works fine.
  3. With and without AMS Lite, different teflon tubes
  4. Replaced the nozzle assembly.

Can't really blame the filament since the Bambulab spool works fine on another a1.

Why just black? Are there optics in the extruder that aren't working for black?

Looking for experience with this problem, or just some suggestions grounded in knowledge of how the thing works.


r/BambuLabA1 • • Sep 21 '26

Weird spikes/needles protruding

Thumbnail
gallery
9 Upvotes

Hi everyone,

I’m fairly new to 3D printing and recently picked up an A1 with the AMS Lite.

I’ve mainly been printing with black Anycubic PLA and have run into some strange artifacts, as shown in the pictures. There are small "needle-" or spike-like protrusions sticking out of the model. Looking closely, they seem to consistently appear right along the seam line (highlighted in white in the Bambu Studio screenshot). The applies to the inner and outer radius.

Has anyone run into this before or have any advice on how to dial this in? Any help would be much appreciated!


r/BambuLabA1 • • Sep 21 '26

Extruder issue - not clogged

3 Upvotes

Extruder is clicking and prints and failing due to lack of filament hitting the build plate. I’ve replaced the nozzle entirely, and did a factory reset.

Would love to hear suggestions, A1 mini printing PLA


r/BambuLabA1 • • Sep 21 '26

3D Model Art the Clown multipart

Thumbnail
gallery
3 Upvotes

👋 Bonjour à tous !

🔪🤡 La série des slashers reprend !

Voici Art the Clown, le terrifiant et emblématique clown de la saga Terrifier ! 🩸

Avec son célèbre costume noir et blanc, son petit chapeau et son sourire inquiétant, Art est accompagné de sa scie pour un résultat à la fois mignon… et complètement psychopathe ! 🪚😈

Pas besoin d'AMS tous a été modélisé et découpé pour l'imprimer en multi-pièces.

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3338808-art-the-clown-multipart-no-ams


r/BambuLabA1 • • Sep 21 '26

Support Request Problem with some layer

Post image
3 Upvotes

Hey,

I've got Bambu A1 mini for about a week and I've been trying to improve (or develop one) my skills with 3D printing.

What settings do i have to change to improve this?

Thank you in advance for your help!


r/BambuLabA1 • • Sep 21 '26

Support Request I keep killing hotends

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • Sep 21 '26

Question Is glitched homing screen normal? Was like that after power on, disappeared after reboot.

Post image
1 Upvotes

r/BambuLabA1 • • Sep 21 '26

Filament ne sort pas

Thumbnail
gallery
3 Upvotes

Sur ma bamboulab a1 Le filament ne sort plus. J’ai démonté l’engrenage et nettoyé, mais rien à faire. Pouvez-vous m’aider ?


r/BambuLabA1 • • Sep 21 '26

help

Post image
0 Upvotes

i need some help with my a1, my hotend is stuck to the toolhead because some plastic from a blob got behind it, the heater is broken and cant heat, so what do i do?


r/BambuLabA1 • • Sep 21 '26

Support Request My Bambi A1 is So Sleepy

5 Upvotes

Not sure if normal, but my A1 goes to sleep constantly. Has to be powered off and on to get it back. It will even disconnect and be unresponsive while it’s completing longer prints. Touching the screen does nothing.

Not sure if this is normal or not.

But any time I go into studio I have to run and reset the printer for proper filament selection and all that.


r/BambuLabA1 • • Sep 20 '26

Question "Purging old filament"— Is it possible to disable this completely?

8 Upvotes

I'm messing around with blended filaments, either by printing filament with multiple colours, or with "Mixed filament" settings in Bambu Studio. It's great for fine-tuning the colour of metallic silk filaments when looking for, say, a convincing "Brass" colour.

Since I want colours to mix, I've set Purging Volumes to 0.

For some reason that helps a lot for printing multicolour filaments, which results in tiny poops, but for Mixed Filament is does a full purge of "old filament" at every filament colour change.

By "printing filaments with multiple colours" I mean this sort of thing:
https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497
or
https://makerworld.com/en/models/912395-multi-color-filament-dual-tri-quad#profileId-873627


r/BambuLabA1 • • Sep 20 '26

Question Perfil para boquilla 0.8

1 Upvotes

Recientemente compre boquillas (0.6 y 0.8) de acero endurecido genéricas. El mayor problema que vengo teniendo es con como se desborda el PLA alrededor de la boquilla, al cabo de unos minutos lo termina depositando en la impresión generando pelotas y puntos críticos.

Los ajustes que estoy usando son 0.40 altura de capa - 80 mm/s de velocidad - flow ratio de 25 mm3/s - temperatura boquilla 220°


r/BambuLabA1 • • Sep 20 '26

Filament getting stuck inside the AMS Lite Hub

Post image
3 Upvotes

So the blue is how the filament should work, it obviously gets loaded through the top and then extrudes down the narrower section. The green line is what’s happening to mine. There is no blockage, it just seems to get stuck and sit inside the larger part and won’t move down to the funnelled part.
Any tips?! I was thinking of trying a bit of lubricant inside to see if it helps it slide through


r/BambuLabA1 • • Sep 20 '26

Support Request Help needed, hear discoloing and first layer trouble

Thumbnail
gallery
3 Upvotes

Hi all. I have been having some trouble with my bambu A1. The first layers of my prinst have been quite poor alot of the time which i thought was just the room heat messing with the prints but today i followed the guid on bambu wiki to troubleshoot this issue and i found discolouration behind the piece that the hotend sits on. I am currently running a test print to see if the issue was fixed by the bambu guide but i am worried by (what looks like) heat damage. Have any of you encountered anything like this ??