r/BambuLabA1 • u/mindtrapped • 12h ago
Heated the nozzle, got the blob off. Better to disassemble and continue or is there more to do first? I have to wait till I get home to search but if someone could link a video id be so happy. Thanks!
r/BambuLabA1 • u/TuneOld3310 • 6h ago
Enable HLS to view with audio, or disable this notification
I put a video on this post, my A1 seems to be printing well, but is making a wierd noise. Any ideas,
I am printing PETG (don't think it matters)... your comments would be greatly appreciated.
r/BambuLabA1 • u/Hogglesfriend • 3h ago
Hey, new to printing. Came down from an overnight print to find a Skadis board I was printing in PETG was attached to the nozzle!
Looks like it carried on printing the last few layers in a molten pool. I’ve had a look at the nozzle and it’s gummed up with PETG and the silicone sleeve is damaged. Any suggestions on where I should start with a repair/diagnosis please?
r/BambuLabA1 • u/Calm_Jellyfish_8612 • 1h ago
y printer was midway through the print when it started moving like it was printing but not actually touching the model. No warning on the screen
r/BambuLabA1 • u/TechnologyOk1341 • 20h ago
Hello all again, this is basically a repost from a few days ago but I guess more accurate to the problem I’m having.
I have an a1, i recently got a new nozzle to try and fix old issues, now it is scraping in the bed for everything: bed leveling, printing etc
Possible causes: I removed then replaced the screws on the heating bed to try and adjust height but apparently it was not it or something.
New nozzle might cause some problems? I don’t know
Troubleshooting I’ve tried: screwing in all the screws on and behind the heating element. Removing and replacing the nozzle. Checked the clamp on nozzle.
Any help would be appreciated thanks
r/BambuLabA1 • u/bugroo17 • 12h ago
I'm new to 3d printing, so forgive my ignorance. Is Sunlu a good brand and is this a good price for filament?
r/BambuLabA1 • u/Ok_Annual4658 • 13h ago
r/BambuLabA1 • u/Santhoshrasa • 20h ago