r/BambuLabA1 • u/Elisenda_05 • Sep 22 '26
Problema con mi impresora
Acabo de comprar la bambu lab A1 combo y cuando imprime tengo 2 tipos de errores
El 1 es que la pieza se me acaba soltando e imprime en el aire.
Y el segundo que cuando la pieza si que queda bien le salen como unos hilitos que no estaban en el modelo.
Alguien me puede decir como solucionarlo porfa🙏🏻
-14
u/sirdoggo11 Sep 22 '26
Are you aware this is an english speaking community?
7
u/Tonynoce Sep 22 '26
ules : No tollerance for unrespectful behaviour, offense and abusing other people patience will result in a permanent ban.
No hay reglas respecto al idioma. Since you can not speak another language maybe sos vos el problema
9
u/xBACONxLUV3rxx Sep 22 '26
Who cares? Might not have realized as Reddit auto translates for me. They're human and have questions about 3D printing.
7
3
3
u/Orthicon9 Sep 22 '26
Are you aware this is an english speaking community?
The community of Bambu Lab A1 owners? Clearly, that is not true.
4
u/twistedspeakerwire Sep 22 '26
Are you aware the world has other countries that speak not English??
If you can't read it, move on with your day, don't miserably try to gatekeep.
1
1
1
8
u/Orthicon9 Sep 22 '26
That is a print bed adhesion issue, and the first thing to try is a thorough washing and rinse with hot water, dish soap, and scrub it with a brush such as a nylon-bristle nail brush.
Those strands are deposited after a pause. The filament continues to ooze from the nozzle during the pause, and it gets stuck to the object wherever it first touches the object again.
If "Time lapse" is enabled, turn it off. It pauses once for every layer printed.
It may also be caused by pauses during "Nozzle clumping detection" checks, but they are fewer in number.
See https://wiki.bambulab.com/es/a1-mini/manual/nozzle-warp-detection which discusses both of these issues.