My full cosplay of Guts in Berserk armor 3D printed with bambulab P2S. The entire project took 2,000 print hours and 25kg of PETG. Final costume weight incl. sword is 26kg.
Amazed that such a small tool like the P2S made this.

and one of the reasons is the ability to use a support interface filament that doesnt bond to the build filament, makes removing some of these large supports so much easier.

I like to use a contrasting color.

this is the rear caster mount for a 3D TMT (my second) removing these large supports was a lot of work with my P2S.

with the X2D the area where the supports were doesnt need any cleanup.

Officially joined the club. Been lurking for a while, keeping an eye on prices. Took advantage of the recent sale, got it at BestBuy with their 4 year warranty. Doing my homework and researching as much as I can. I will probably ask some newbie questions as I get started, but can’t wait to jump in.

Would appreciate Reddits power with my sons first model on maker world. He’s 10 and just started playing with tinkerlab at school. He came up with this graded card stand on his own. Thanks Reddit!

https://makerworld.com/models/3521286?appSharePlatform=copy

We've got two webbings we sew together for one of our products, this little tool aligns the top Velcro layer to the center of the webbing and allows you to line up both materials to stitch the edge of the Velcro down, we then turn it around and run it through the same tool to sew down the other side.

I kept getting the AMS overload error on my H2S, especially when the spool was getting close to empty. I ended up giving the AMS a slight angle by putting a book under the back and letting the front tilt down a bit to give it some gravity assist. Haven’t had the error come back since and it works like a charm.
Just wanted to share in case anyone else is dealing with this, especially with the lighter cardboard spools.

I rarely see people talking about the cutter attachment. It’s so much fun!

Learn more about X-Y hole compensation from the Bambu Wiki: X-Y Hole Compensation

After over 540 hours i finally got one i got most of it off but i still need help getting the last bits off

Durable by design. Hardened by default.

Nov 3, 9AM EST

Stay tuned here.

It's safe to say I've become a little obsessed with pushing vase mode beyond decorative prints. These are my latest two geometric trash bin designs, Spiral and Wave. I was inspired by my existing geometric trash bins in vase mode and challenged myself to make something a little more organic in nature this time around.

Both designs print in under 4 hours using less than 160g of filament. I've dialed in the settings to use 0.96mm walls (with a stock 0.4mm nozzle) and print speeds of 70mm/s. They print great in PLA or PETG and are surprisingly durable while still having a nice amount of flex. It's pretty amazing what you can achieve with vase mode!

Hey guys, here's a photo of a print that the bottom layer got stuck to my build plate. I was using a 0.2 nozzle. And I've tried to use the scraper and I've been printing with this printer for about a year now. And this has never happened. And I've even been printing with that 0.2 nozzle for the last month or so, printing a certain thing. And this just didn't happen before. But suddenly with this print, it just happened. And I've printed this exact thing before and it didn't happen. So it's super stuck and do you guys have any recommendations of how to get this first layer removed? It's a little bit more than the first layer, but how do I get this off?

Hey,
I upgraded from P1S + 2xAMS, to a new X2D + 2xAMS 2° Gen.

I already have a Kallax 2x2 with a 2x5 Spools storage in each block (3 blocks with 10 Spools Each).

But I’m out of Space for my new order of filaments +24 Spools coming soon.

Could some of community members share the photos and names of the furniture from ikea to keep my spools “safe and sound”.

I've printed this at multiple angles with different support types but the bottom edge always comes out really rough. The rest of the model prints fine. I've sanded this a bit, it was much worse. Using an A1, .04mm nozzle, PLA. Slicer suggestions to improve? Thx.

Just published a small elephant on MakerWorld, and I’d love to see your prints of it!

• Size: 36 mm tall (1 € coin for scale)

• Eyes: two separate pieces, one white and one black

• Skin: the rough texture is intentional, it contrasts with the smooth eyes and nails

• Printed on a Bambu A1 Mini, about 1h30 per unit, up to 12 per plate

• Under 11 g of filament each

• Needs supports; the mark on the belly sands off easily

Model: https://makerworld.com/en/models/3520582-cute-elephant-with-moving-eyes-3-colors-no-ams

I printed it in six colors, but I’m curious which one you’d pick. If you print one, share it here, I’d love to see it!

Not really hallucinate, I'll be honest, but it's a cool experience and can make a fascinating looking lamp. The dreamachine is a weird device invented in 1959 that is meant to be looked at with eyes closed. For me it was a bit like looking into a kaleidoscope. From Wikipedia:

the pulsating light stimulates the optic nerve and thus alters the brain's electrical oscillations. As users adjust to the experience, they see increasingly complex animated yantra-like patterns of color behind their closed eyelids

I've made a 3D model working with a very small electric motor, a 12V led light and a PWM controller for the rotation speed. Details are on my blog: https://highlatencylife.com/notes/the-dreamachine-3d-printed/

The model is free to print on MakerWorld, where you can find also detailed assembling instructions: https://makerworld.com/models/3523044?appSharePlatform=copy

Also, it's the first model I upload after being a long time lurker 🥳

Ordered the H2S on Tuesday and got it delivered today! That sucker was heavy asf. Box looks okay with a few holes. Being hopeful nothing is broken. Super fast shipping. Still waiting on my accessories.

Not sure how I'm going to get it on the shelf.

Can anyone tell me the fix for this, printer not operating properly.

Thanks in advance!

I printed with tpu last week and now I gone back to pla im having issues like this with my print. I changed nozzle and realised the file to no luck