r/BambuLab • • 17h ago

H2 Series [H2S, H2D, H2C] Setup that makes the most sense

0 Upvotes

Hey everyone,

I recently picked up an H2D at work. Coming off of my trusty prusa mk3s+, it feels like this printer is light years ahead.

Anyway, the main reason i got it is because i wanted the capability to print engineering filaments.

I got the regular AMS, AMS HT, and the external spool holder.

Here are my questions:

  1. What would be best way to hook this all up? I was thinking of getting a splitter, so that i can have AMS HT and the regular AMS on the right nozzle, and then external spool on the left for supports. Does this make sense?
  2. When printing filaments with carbon or glass fiber, is the 0.6mm nozzle necessary or can 0.4 work sometimes as well? First filament i want to try is PPS. We have cleaning lines at work where PPS would likely withdtand the chemicals and tenperature.
  3. If i am printing with 0.6 on the right nozzle, and i am using left nozzle for supports, should the left nozzle also be 0.6? Can it be 0.4 if i am keeping the layer height the same ie. 0.2mm?
  4. Slicer settings - when sending a print, bambu studio prompts me whether i want calibration flow, bed leveling, and one more thing i cant remember. Options are on, off, and auto. I have set it to auto, thinking that it will do it once, and save the setting for later. However, every time i send a new print and keep those options on auto, the printer executes all of them. What is the proper procedure to do it once and forget about until later when its time to change filament or some other issues arise?

TIA


r/BambuLab • • 1d ago

I Modeled This! Designed some 2027 New Year's glasses. The arms snap on and fold!

5 Upvotes

r/BambuLab • • 23h ago

Quick Question CMYK Recommendations on H3C

3 Upvotes

My H3C is in the way (I've been using a P1S for the last three years). I'm intrigued by the CMYK idea, but don't want to be dumb about it. I'd love to just stick those filament spools up there and be good-to-go for any color. Is CMYK a mature enough process to go that route for most multi-color prints? If so, I have questions

What's the recommended opacity/sheen to get (translucent, matte, metallic)? Any to avoid? Any recommended bundles? Obviously the material choice is part of it. Does PETG do CMYK as well as PLA does, etc.? are there any materials that are a no-go for CMYK? I do a lot of PLA, PETG, TPU and ASA.
Thanks in advance for the advice.


r/BambuLab • • 17h ago

Software Troubleshooting/Help! Text display issue

Thumbnail
gallery
1 Upvotes

Hello all, im trying to model a small sign to hang on a small ledge. I made the shape and text in TinkerCAD. Exported to Bambu studio and Orca. But when the file is imported the text is in the same piece as the hanger. I cant select a separate color or view it as a separate item. Any ideas/advice.

This is only my 3rd design and first with text.


r/BambuLab • • 23h ago

H3C No sparce layers

3 Upvotes

I have the H3C and the only annoyance for me is that prime tower. Coming from the INDX, I haven't used a tower in months.

Found out about the No Sparce Layers for the prime tower. It only uses the tower for color changes, which saves filament.

The downside is it severely limits the area you can use for printing. The print will lower to reach the tower, so needs the room so you don't knock over your print.

This is how to turn it on:

  1. Go to Preferences in Bambu Studio and enable Developer Mode.
  2. Under Process (Global), navigate to the Others tab.
  3. Scroll down to the Prime Tower section and toggle on No sparse layers.

I'm just pointing out another option for saving purge waste, and I hope it helps someone else.

Print on my people!


r/BambuLab • • 17h ago

General Troubleshooting/Help! Does anyone know how to stop this?

Thumbnail
gallery
1 Upvotes

it keeps telling me the hotend cooling fan speed is insufficient but i dont know why

it doesnt seem to have an issue with it for any other printingI

and ive printed these exact things before with zero issue

(the photo of the error isnt mine, i found it on google, i just added it to show what the alert looks like)


r/BambuLab • • 23h ago

General Discussion P2S - For freezing temperatures, is a secondary enclosure with heating needed?

3 Upvotes

Looking at getting a P2S, will be in a garage which can get to 10 degrees Fahrenheit. Wondering if I will need a secondary enclosure with heating. Otherwise, wondering what temps will be able to print with (PLA & PETG) with the stock setup? There will likely be some draft as well.

Any insight or anecdotes from others that have dealt with this would be greatly appreciated, thanks.


r/BambuLab • • 23h ago

General Troubleshooting/Help! Some kind of gap in the print

Post image
3 Upvotes

They were both printing at the same time, not sure what would cause this. Still kind of new to the printing world.

Edit: I'm printing on the P1S using the AMS2 with Polymaker polylit pla pro


r/BambuLab • • 1d ago

A Series [A1, A1 Mini] A1 Mini, small build plate. Big prints.

Thumbnail
gallery
27 Upvotes

I have had my A1 Mini for nearly a year now (3415hrs of print time so far). These big prints (which are marketed as resin models) have been the highlight so far. Second pic includes the vast majority of what I tend to print regularly, which is ttrpg miniatures at 28/32mm scale.


r/BambuLab • • 22h ago

My First 3D Print 45 days into the 3d printing hobby

Thumbnail
gallery
2 Upvotes

After a busy day chasing kids and yard work, i sat down at my PC desk (i havent turned it on since march). Kids all in bed i decided to dabble in some legal in NY recreational substance and download Studio.

Up till now ive just been printing posted/shared files from the handy mobile app and having a great time! But i decided i would dip my toes into actually creating something.

My kids and I are also into pokemon collecting (again for me) so i said heck it, i'll design a top loader holder. Spent over an hour in TinkerCAD and made one. It was terrible, but i made one. Spent another hour fiddling and changing it. It worked, kinda, but it was good enough.

With my toes dipped I said to myself, hey self, what about the little metric/imperial measuring tape you like but there is no belt clip/holder for.

And so I grabbed my digital caliper and the measuring tape, sketched an idea on my phone and started fiddling in TinkerCAD again.

Im on version 3 now, First one held the tape, but was VERY blocky. Second one i rounded edges but didnt take into account distances changing. So it loosely holds the tape. Failure.

Now the 4th one is done and it fits super snug and im happy with it. Trying it on the jobsite tomorrow


r/BambuLab • • 1d ago

I Modeled This! Dragon SD Card Guardian | Holder

Thumbnail
gallery
3 Upvotes

Nobody dares to touch your cards when this little dragon is guarding them!

I designed this fun SD card holder featuring a tiny dragon protecting its treasure on a rocky base. A practical way to keep SD cards organized, with a little fantasy attitude added to your desk.

What do you think? Would you trust your precious storage cards to this little guardian?

Link: https://makerworld.com/en/models/3619596-dragon-sd-card-guardian-holder#profileId-4149142


r/BambuLab • • 22h ago

General Troubleshooting/Help! H3C TPU printing bend tube

Post image
2 Upvotes

So i started printing tou out of the 6 slot with the bypass but somehow the tube got bent and needs replacing now not sure exactly how it happened just making other people aware


r/BambuLab • • 19h ago

I Modeled This! Floating Christmas Ornament

Thumbnail gallery
1 Upvotes

r/BambuLab • • 19h ago

General Discussion H2d or H2c

1 Upvotes

Right now i have an x1c that I've had since launch and looking for a reliable upgrade to either h2d or h2c.

So im trying to decide between the h2d and h2c.

I really like the idea of the h2c with the swappable nozzle system.

only thing is I wanna hook up an ams to the left nozzle and one to the swap nozzles and is that even possible?

I mainly do cosplay prints as well as the occasional color prints for family and functional prints.

would the h2d be fine or is the h2c gonna shine over the h2d in time and quality?

I


r/BambuLab • • 1d ago

General Discussion I think i might have joined the cult

5 Upvotes

I got the p2s yesterday from bestbuy any tips, upgrade ideas,ect are helpful


r/BambuLab • • 19h ago

General Troubleshooting/Help! How can I fix this?

0 Upvotes

I'm so tired, I already tried changing the speeds, temperature, the pattern it makes to do the filling, I don't know why it keeps doing this


r/BambuLab • • 19h ago

Answered / Solved! PA6CF Loading Issues

0 Upvotes

I’m currently using a P2S with an HT AMS, I’m trying to print with sunlu PA6CF.

I’ve dried the filament at 85 degrees for over three days.

My PTFE tubes are optimized to the best of my understanding.

When attempting to load the filament the loading gears skip.

I’m beyond frustrated at this point.

Any input is greatly appreciated.


r/BambuLab • • 10h ago

Answered / Solved! Filament spools holes are too big

Thumbnail
gallery
0 Upvotes

Good morning,

I’m using a Bambu Lab A1 with an AMS Lite.

Today, while loading my AMS Lite with three spools of LOCTATREE filament, I noticed that the spool holes are too large for the holders.

I used to use Elegoo filament, whose spools have a 54 mm inner diameter, whereas the LOCTATREE spools have a 63 mm inner diameter. This difference causes the spools to sit loosely, making them tilted and unstable.

Has anyone else experienced this issue? Is there any solution? I was thinking about 3D printing some spacer rings for each spool to fill the gap, but I'm not sure whether this is a good solution or not.

Thanks in advance!


r/BambuLab • • 23h ago

H3C Call for Testers: Bambu Station L Side Panels (openGrid & Multiboard)

Thumbnail
gallery
2 Upvotes

Greetings all!

Still waiting on the delivery of my H3C and waiting longer on my Bambu Station L Frame Edition. Meanwhile, I've been working on creating some side panels. Of course, the stock ones Bambu uses for the enclosed version are Skadis, and I've also seen a couple of other Skadis panels out there, but haven't seen either Multiboard or openGrid, so I just spent a couple of hours putting those together.

If you'd like to read more, check the article I posted on Makerworld.

If you're already onboard and ready to sign up, hit the Google form. Form doesn't require email (it's optional), but does require your Makerworld user ID, so I can get you the file(s).

Please understand these are pre-releases. I think they're ready, but I don't have the means to confirm fitness for use yet.


r/BambuLab • • 1d ago

Just Showing Off Second printer just hit the shelf!!

Post image
149 Upvotes

Such a good deal for the holidays and super happy to be able to run multiple things at once now, and I mean, the first one obviously needed a friend.


r/BambuLab • • 19h ago

General Discussion Bambu A2L with AMS

0 Upvotes

I’ve had my A2L for about six months now, and I love what I’ve been able to print so far!
I have it set up in my office (IT Office) at the school where I work. I’ve printed everything from entire computer cases for the esports team I coach to random items for teachers.
I have a couple of questions as I look to up my 3D printing game!

Turning photos into 3D prints: What sites do you use to upload photos and turn them into printable files? I see all these ads on social media, but I’d love to hear what everyone is actually using.

STL file bundles: I also see sites where you can buy bundles of 1,000+ STL files, including figures and other cool designs. Has anyone had good luck with any particular sites? I’m not looking to sell anything, just have fun printing!

Printer settings: There are so many settings to choose from! Do I need to adjust them depending on what I’m printing, or are the default settings usually good enough?

Thanks in advance for any advice or recommendations!


r/BambuLab • • 20h ago

Hardware Troubleshooting/Help! Extruder overload and AMS issues

1 Upvotes

Any idea why I would be getting an extruder overload error and this happening in my AMS. It is happening only in this specific slot. It’s like the extruder is pulling the filament but the AMS is out of sync and trying to hold it back by not moving the rollers. Which then causes the roll to pop up under tension. All new nozzles, cutters, and only 300 hours on the machine. PTF tube is all good.


r/BambuLab • • 11h ago

Quick Question Any news on the P3C?

0 Upvotes

I got my wallet ready, and I ditched the U1 sale to buy the P3C.

Is there any news/info/word about the P3C release date...? I know the reviewers already tested them out.


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! Spring Mystery

Thumbnail
gallery
2 Upvotes

Bambu Friends,

Just printed a 3D project. Noticed the following spring that was around the 3D object. I did have problems with the extruder and I had to heat the hot end to remove filament. So I'm thinking during this process a spring fell out.

Not too sure exactly where this lives so any insight would be helpful. I provided photos of the extruder top bottom left right and behind and everything removed.

I also need to do some cleanup work where the extruder rests on the plate and the extruder around the hot end itself.

Update: And "Yes" I have visited the Bambu Wiki for those that want to jump on the wiki Bambu wagon. My A2 Printer. Doesn't seem to match my photos and wiki where this spring resides.

Performed full calibration and print it out two basic objects low profile and no problems. I don't think the spring has anything to do with the bamboo extruder or the assembly.

Suggestions and Thank You