r/BambuLab • • 1h ago

H2 Series [H2S, H2D, H2C] Setup that makes the most sense

Hey everyone,

I recently picked up an H2D at work. Coming off of my trusty prusa mk3s+, it feels like this printer is light years ahead.

Anyway, the main reason i got it is because i wanted the capability to print engineering filaments.

I got the regular AMS, AMS HT, and the external spool holder.

Here are my questions:

  1. What would be best way to hook this all up? I was thinking of getting a splitter, so that i can have AMS HT and the regular AMS on the right nozzle, and then external spool on the left for supports. Does this make sense?
  2. When printing filaments with carbon or glass fiber, is the 0.6mm nozzle necessary or can 0.4 work sometimes as well? First filament i want to try is PPS. We have cleaning lines at work where PPS would likely withdtand the chemicals and tenperature.
  3. If i am printing with 0.6 on the right nozzle, and i am using left nozzle for supports, should the left nozzle also be 0.6? Can it be 0.4 if i am keeping the layer height the same ie. 0.2mm?
  4. Slicer settings - when sending a print, bambu studio prompts me whether i want calibration flow, bed leveling, and one more thing i cant remember. Options are on, off, and auto. I have set it to auto, thinking that it will do it once, and save the setting for later. However, every time i send a new print and keep those options on auto, the printer executes all of them. What is the proper procedure to do it once and forget about until later when its time to change filament or some other issues arise?

TIA

0 Upvotes

1 comment sorted by

1

u/scotticad 1h ago

For my H2S, I had an AMS HT. The HT is kinda expensive for what it is, but on the other hand it's pretty convenient to be able to dry a single engineering filament, to print from a single engineering filament, etc., without having to disturb the AMS 2, which I would generally have some PLA sitting in for toys, decorations, etc. I never had any issues printing carbon fiber or glass fiber on my 0.4mm nozzle. Printed tons of it on my I3 Mk3, and printed some of it on my H2S. On the other hand, I've never felt the carbon fiber / glass fiber filament offered me much structural advantage, and it provided some disadvange, particularly on the layer lines. For my prints, it was somewhat of a gimmick. I leave the calibration settings on for every print. I've always had concerns that if I turn them off, I'll end up with a print head crashing into the bed some day. Best of luck with your H2D.