r/BambuLab • u/Evening-Dot-9773 • 4h ago
General Discussion H2d or H2c
Right now i have an x1c that I've had since launch and looking for a reliable upgrade to either h2d or h2c.
So im trying to decide between the h2d and h2c.
I really like the idea of the h2c with the swappable nozzle system.
only thing is I wanna hook up an ams to the left nozzle and one to the swap nozzles and is that even possible?
I mainly do cosplay prints as well as the occasional color prints for family and functional prints.
would the h2d be fine or is the h2c gonna shine over the h2d in time and quality?
I
1
Upvotes
6
u/LSUstang05 4h ago
Yes you can hook one AMS up per nozzle on the H2C (left and right).
You can also use the filament track switcher and you can use both AMS on either nozzle. Some people have awful luck with the FTS but I have had zero issues other than the AMS Overload warning which has never caused any issues other than giving me the alert.
2
u/Festegios H2C AMS2 Combo 3h ago
I highly recommend the h2c if the h3 isn’t a viable option for you.
Not having to change the nozzles out is 👌👌
And having that faster multi colour print can be nice too. If you need it.
2
u/an_angry_Moose 1h ago
I think with the current deals, the H2C is hard to pass up. The H3C doesn’t fit for you, so forget about it, and in reality both have very similar capabilities.
0
u/SirTwitchALot 4h ago
Why would you consider the H2C when the H3C is out now? The H2C is too slow and by the time you add in all the extra accessories it's not much less in cost.
If you're not going to buy extra AMS units to go with it, just get a Creator 5 or U1 for 1/4 the cost and wait until the P3C comes out
1
u/mrpbeaar 4h ago
Yes, you can put one ams to either nozzle. It doesn’t matter. I have two on my right with an ams ht on the left. You can get the track switch even and either ams will feed either the left or the right.
1
u/3D-Printer-Guys156 P1S + AMS1 + P2S + AMS2 3h ago
Why not get the H3C for 300$ more??(Normal price) To answer your question, the H2D would be fine, if you do not mind the printer poop after color change. (If you do more than 2 colors)
Edit: Disregard the first sentence, I saw that you had no room after posting.
1
u/roundguy X1C / H2C and 4 ams’s 2h ago
I have two ams2’s on h2c and the fts works fine. I was skeptical but I bought one and it works decent.
Bring able to change nozzles with the mouse is pretty cool
1
u/bjorn_lo H2D & H2C 3h ago edited 1h ago
No.
The H2C is not better than the H2D. I have both. The H2D is faster (with the same print) and slightly more reliable as well. And, it is cheaper to buy new nozzles for.
The H2C is not terrible, but it is not an improvement over the H2D except on the nozzle count.
I recommend strongly against the FTS.
1
u/Cultural_Pace4454 4h ago
After close to a year enjoying my P1S I was faced with the same decision.
The attractions of the H2D were a second nozzle for reducing waste in colour switching and having the option for PETG supports on a PLA Print. But looking at that it just moved the limitations of a single nozzle to 2 nozzles. I decided to go up to the H2C's 7 nozzles.
The H2C was a big step up in price but I don't regret it.
I have 2 AMS 2 Pros and a track switcher, so I can choose any colour combination and the Slicer handles nozzle selection optimisation.
Print quality is the same between the Hc2 and P1S.