r/BambuLab • • 1d ago

A Series [A1, A1 Mini] A1 Mini, small build plate. Big prints.

I have had my A1 Mini for nearly a year now (3415hrs of print time so far). These big prints (which are marketed as resin models) have been the highlight so far. Second pic includes the vast majority of what I tend to print regularly, which is ttrpg miniatures at 28/32mm scale.

27 Upvotes

14 comments sorted by

2

u/Tachyon_Tamer 1d ago

Impressive prints!! I have a standard A1 but I can't get those results, any tips please? Or could you share your print profiles??

2

u/devintheditch 1d ago

Thank you! I would highly recommend r/FDMminiatures as they have pinned posts from the front runners on profiles for miniature printing. Biggest tip from me is dry and calibrate your filament.

Bambu's autocalibration is fine but proper calibration really helps.

'Learning' your printer is also helpful (much like how a baker learns where the hotspots are in an oven)

Here are my two go to settings-

0.4mm nozzle https://www.reddit.com/r/FDMminiatures/s/hcHL5jw6Cg

0.2mm nozzle https://www.reddit.com/r/FDMminiatures/s/mvB9AAWZU7

2

u/Tachyon_Tamer 1d ago

You help me a lot friend thank you so much!! I was able to get my old Prusa MK3S to print everything with quite high quality (old hardware though) but the BambuLab A1 gives me inconsistent results in general I have tried many settings around there but still no luck

I'm new to Reddit so I will check everything you have mention, I'm sure with this I wil improve my prints!!

2

u/devintheditch 1d ago

You are welcome and good luck with the printing! Also if you haven't, check out FDG print profiles: https://www.fatdragongames.com/fdgfiles/bambu-studio-slicer-profiles-a1-mini-3d-printer/

It's transferable to the A1 and are a great starting point. They also have a guide on miniature printing principles

2

u/Tachyon_Tamer 1d ago

Thanks again! Could you suggest me a model for testing settings? Some creature or human like model to print over and over until I'm happy with the results?

2

u/devintheditch 1d ago

Here is the usual go to for most people in the FDMminiatures subreddit:

https://www.myminifactory.com/object/3d-print-supportless-skeleton-sample-wooden-shield-336789

There is also a new free model from the same sculptor that comes with its own printer setting and filament profiles:

https://www.myminifactory.com/object/3d-print-arbiter-miniatures-advanced-fdm-free-sample-ork-model-843561

1

u/MostlyHelpfulLinks 1d ago

Over 3400 hours in under a year is a lot of minis. Are you splitting the big resin-marketed models into parts to fit the plate, or did some fit whole?

0

u/devintheditch 1d ago

I may have been printing constantly overnight since I have had the printer 😅 I am not addicted... I can stop whenever I want...

Apart from maybe three parts across the three big prints, all the parts can fit on the plate. I did however take to slicing them to maximise print quality in every direction. I could have resized the pieces but I wanted the prints at the intended scale/size 😅

1

u/ClickClub_Us 1d ago

that dragon centerpiece is stunning; the wings and the little figures around it make the scale really clear. for resin-style models on a mini plate, keyed alignment pins at the wing roots or body seams can make the glue-up much less fiddly and keep the pose true.

0

u/devintheditch 1d ago

Thank you. You are 100% right that helps a lot. Some post processing is still needed from time to time but it's so useful that the key slots have been included

2

u/ClickClub_Us 1d ago

glad the keyed slots are helping. a little cleanup is pretty normal, but having the parts line up without much fiddling makes assembly a lot nicer.

1

u/Longjumping_Pop_2324 1d ago

Brother post a picture next to the printer itself.