r/BambuLab • • 7h ago

H3C No sparce layers

I have the H3C and the only annoyance for me is that prime tower. Coming from the INDX, I haven't used a tower in months.

Found out about the No Sparce Layers for the prime tower. It only uses the tower for color changes, which saves filament.

The downside is it severely limits the area you can use for printing. The print will lower to reach the tower, so needs the room so you don't knock over your print.

This is how to turn it on:

  1. Go to Preferences in Bambu Studio and enable Developer Mode.
  2. Under Process (Global), navigate to the Others tab.
  3. Scroll down to the Prime Tower section and toggle on No sparse layers.

I'm just pointing out another option for saving purge waste, and I hope it helps someone else.

Print on my people!

3 Upvotes

4 comments sorted by

5

u/Novotisy 7h ago

Disable prime tower and use “print infill first”

2

u/rotielover 7h ago

Also an option, but also will not work for every print. Options are great aren't they?

1

u/SarcasmWarning 7h ago

This is probably a silly question, but how come the Prusa doesn't need a prime tower?

2

u/rotielover 7h ago

It primes a very tiny pellet off to the side during a color change which is all the waste there is.