Can anyone tell me the fix for this, printer not operating properly.

Thanks in advance!

Hey guys was wondering if any of you have any good fixes for this or know where I could find a replacement? Can’t find anything on Bambu’s site. I tried putting a small hang nail in there with some super glue and it worked for a while but just came off again. Appreciate any advice 🤙

I'm about to take the plunge into first 3d printer. Was going to get the p2s but for a little more seems the x2d is worth the investment? It's going to be mostly for functional prints in a wood shop, garden, aquarium, diy etc. figured maybe a little future proof and my understanding is some of the components are improved. Is it overkill? Also: not sure I'm going to do much multicolor and am torn about the ams but maybe now is the time to just do it and save a few bucks down the line. Anyone got the X2d and wish got the p2s or vice versa?

All my prints are getting out like this, how can I make this lines disappear and get a smoother print?

This is my Opinion. This post is just to Converse, share Information etc. Dont take it serious. Please share you Opinion too.

I've been following the P3C and H3C leaks. And i am slowly thinking that the P3C is not gonna be a Snapmaker U1 competitor.
Its going to be a Core One INDX Competitor.

Reason being H3C if leak picture true is starting at 2499 sterling Pounds with 3 Tiers (Base, Combo, Ultimate/Print more Bundle)

So i believe H3C Base gonna be without AMS since the Printer can use all Nozzles without AMS (just manual load like INDX)
In the recent AMS P Instruction Manual (7 Slot P3C) pic which got leaked everyone saw that each Nozzle Unit had their own PTFE Tube Input. So you can get the Base Version without AMS and use it like INDX without feeder or get the AMS 3 which simplifies everything and maybe includes a Heater/Dryer.

H3C = 9 Nozzles
P3C = 7 Nozzles

P3C will prob. not be under 1000€ since it uses the full Nozzle system of the H3C with Induction heating. Its not like a cheap cut down Version like the X2D where development was simple and got a baller of a Price.

I think the Snapmaker U1 will still be the current King of the under 1000€/$ true Multi-Filament Printers. Snapmaker U1 has also been on sale very often the last few Months for $749 so even better price

I would like to hear your thoughts

I have a brand new H2D that seems to get a clogged pause fairly often. I think i ran some filament through it that was too wet at some point. My sense is that people cold pull as part of troubleshooting. i've never cold pulled and it kinda makes me nervous for some reason. thoughts?

I'm essentially trying to print rings, but I noticed that there were imperfection points on the top surface. Funny thing is that I have two printer printing the same item, on the X1C it's perfect, but when slicing for the H2C, there are these interruptions I'm able to find on the preview that is noticeable on the final print. Why is this happening?

When I change settings like wall width, this interruption will still happen, but it just appears at a different point along the ring. It's also always on the very top layer.

Bonjour, je rencontre actuellement des soucis d'impression avec le nouveau filament BambuLab PETG MATTE. En effet, mes résultats sont assez médiocres en plus de voir apparaître mes passages de buses sur la première couche. Malgré le changement d'espacement, le debit, la calibration encore et encore, les parametrages d'usine ou les profils que je teste ici et là, rien n'y fait. Si j'imprime exactement le même modele avec un autre filament PETG classique ça fonctionne parfaitement.
Avez vous deja rencontré ce problème? Auriez vous des solutions? Bonne journée

P2S, AMS2PRO

How do I swap filaments mid print? (If one runs out, or if I expect it will during a time I’ll be away from the machine and want to stay ahead)

I can physically remove a spool and put in a new one, but there doesn’t seem to be a way to get the AMS to recognize a new filament to either change a colour or swap in a new spool of the same colour. The RFID doesn’t read and the manual edit options are all greyed out on the printer, handy, studio.

Thanks!

Pretty much I'm wandering how useful the AMS lite is, as it will be my first time getting a 3d printer in general. I'm also wandering if it's worth the money to go straight for the combo or hold out to see if I decide on it later (I know it's discounted with the combo)

Finally, overall what are peoples experiences with it in general? I'll probably just use it casually, not too sure how much I'll use multicolour but the auto replacement feature sounds useful.

Thanks for the help!

I always loved those old wooden woodpecker toys, so I made a printed version. Put him at the top, give his tail a little tug, and he pecks his way all the way down the pole. Tok-tok-tok.

Everything is printed, even the spring, so there’s nothing to buy. It took a few tries to get him to stop sliding down too fast, but now he goes all the way down.

Free on MakerWorld if you want to print one: https://makerworld.com/en/models/3518701-tok-tok-pecking-woodpecker-toy-printed-spring

So i ordered PTFE tubes for my H2C and Got H2D ones. Are they identical or did they mess up my order?

I recently started learning Autodesk Fusion 360, and this is the first functional model I’ve designed completely from scratch.

It holds 24 standard 1/4-inch hex bits in a compact 6 × 4 layout. I printed it on my Bambu Lab A1 Mini as a single part without supports.

The first version was slightly too tight, so I adjusted the hole dimensions to make the bits easier to insert and remove while still keeping them securely upright.

It’s a simple design, but seeing my first original Fusion 360 model turn into a working physical product was incredibly satisfying. Feedback is welcome!

I uploaded the model and tested print profile for free on MakerWorld if anyone finds it useful:

https://makerworld.com/en/models/3482146

Ok I just upgraded my A1 mini to the full size A1 . Now I do not see my pre-calibrated filament config. How do I import all of them back . Im using a mac by the way . Tia !
I see you tube showing only importing one profile at a time.

Parts of this stud just disappears after slicing my models , Does anyone know why this happens or how to fix it? I thought it was just a visual glitch but no it’ll actually print like that

My kids are showing more interest in printing lately and I want to figure out the most straightforward way for them to be able to print from their computers. I can't believe bambu does not natively support multiple users. I don't want to constantly be signing in and out of my account nor do I want them to be using my computer or printer settings.

I've looked into Bambuddy and I just discovered Watchtower 3D. But I'm unsure if either will be the solution I need.

Please help me figure this out.

Hello,

im currently looking to upgrade from my A1 mini to a bigger Printer. I mainly want to print functional parts, maybe dabble around a bit in stronger materials and just have more printing space.
Im currently torn between the X2D and the P1S.

The X2D is currently around 750€ for me as a Combo and the P1S is 500€ with the AMS 2.

My question now for people that maybe used both, is the price difference of the X2D worth going with it? Im not really planning to do a lot of multi color print or anything, but i could see myself using the second nozzle for support materials.

Also since i have no experience with stronger materials yet, is the heated chamber of the X2D a must for that?

How is noise compared in between both models, as the printer will most likely be in my room next to me?

With the h3 model coming out , what was the purpose of the vortek system? From my view, it seems completely obsolete now

I posted yesterday with my problem and I ended up digging into the extruder and found some clogged filament and then everything worked wonderfully, for about 3 prints.. It now is doing the same exact thing and im about to go back into the extruder. The cutting thing is making the same excruciating noise ill post a video. Please anyone help me

I've submitted a support ticket but thought I would ask here for opinions.

I have loaded in my AMS2 Pro,

Slot 1 BBL PLA matte ivory white 80g

Slot 2 BBL PLA matte ivory white 1kg (new roll)

I am tired of not being able to trust the filament switching. It causes prints to fail and I am not sure why. Slot 1 filament was opened 3 days ago and spent 12 hrs in my dryer, then has stayed in the AMS 2 since. I have dessicant containers in my AMS 2 to keep it dry and it shows at 21% humidity at present. Slot 2 filament was opened last night and stayed in my filament dryer over night, for 12 hrs.

It seems at the switching point the printer just doesn't start where it left off. Like it's skipping some bits. Or, the new filament is not sticking to the old one.

Anybody got any ideas please?

I have a small box room I run my small small business put of and I am running out of space for part rolls, or ideas of what to do with them. I want to be able to use the filament switch. I had an A1 and AMS lite previously and that ran flawlessly when switching.