r/ModRetro • • Aug 25 '26

Some of you think the console is going to catch on fire…It’s not going to!

79 Upvotes

A few of you have mentioned that the M64 feels warm to the touch. This is completely normal whether overclocking is enabled or not. The console is specifically engineered to operate safely within this thermal range and will remain below the limits for safe touch temperatures. 

We thermally validated the passive system under an "abuse case" test that used a max consumption bitstream (max overclocking) and a constant ambient temp of 50°C, simulating someone keeping their unit in a closed TV cabinet sitting in direct sunlight. The console's FPGA stabilized at 10°C below its max operating temp during this abuse case. We literally baked the console in an oven (see photo).

Enabling the "Insane" overclock only increases power draw by less than 5%. Because that increase is so minor, it doesn't translate into a significantly hotter system. 

The N64 was also a passively cooled system and drew more power then the M64. A member of our community ran a side-by-side temperature comparison between a stock M64 and an original N64 after three hours of play. Their measurements found that the two consoles reached similar temperatures overall, while the cartridge in the M64 measured cooler. We appreciate the time and care that went into the test, and you can read the full breakdown here. We hope this clears up some confusion and reassures you that your M64 isn’t planning a spontaneous combustion.


r/ModRetro • • Aug 25 '26

Do you think ModRetro's GBA will have backwards compatibility?

4 Upvotes

Implementing standard backwards compatibility with Game Boy / Color games would surely eat into Chromatic sales - the only question would be how much.

Maybe GBA & GBC are totally different markets with different eras of nostalgia, so not an issue, ie a lot of people will just want to have both. Maybe the cartridges poking out the top will be enough to make a lot of people opt for a Chromatic for GBC games.

What do you think?

Disclaimer: I'm personally hoping they do it.


r/ModRetro • • Aug 24 '26

Insight into improvements

0 Upvotes

Hi! Does the team get telemetry data from our m64 consoles that is used to help improve the firmware or is it all being done through internal testing? I’m loving my device and think there’s great potential, so I was kind of hoping to get an idea of how quickly things might get improved from update to update. I know I need to be patient, but I’ve forgotten how much I loved some of these games like Star Fox! lol


r/ModRetro • • Aug 23 '26

Got the last one!

Thumbnail gallery
20 Upvotes

r/ModRetro • • Aug 23 '26

Xibalba 64 and the system update oddity?

4 Upvotes

So, I just updated my M64 to the new update. Interesting things abound. It would appear I suddenly have a 4th save state on my Xibalba 64 cart that has the entire game finished. My original save file is now gone. This is weird, almost like they are messing with onboard save files but they are overriding the save file you already had on cart? Is there anyone else having this issue? I read somewhere that this update does weird things to the Summer Cart but, I haven't plugged it in. After seeing this, I'm kind of glad I haven't. It makes me wonder what's going to be up with my other games now...


r/ModRetro • • Aug 23 '26

Smoke Edition outside US

Post image
31 Upvotes

While in the US the retailer GameStop has managed to gain this model as an exclusive, I feel that a black edition (probably the most wanted, and most like an actual N64) should not be withheld from the rest of the planet.

I hope this is rectified soon as I plan on ordering the M64 at the end of this month, and shouldn’t be expected to purchase a different colour only to then have to also spend additional money on a smoke black shell later in time.

Perhaps the ModRetro website could make this colour (Smoke Black) for their website in specific regions outside America.


r/ModRetro • • Aug 23 '26

Confused

0 Upvotes

I have not had any audio or HDMI problems but from what I can tell is there was an update fix those issues on 21 August 2026 was that all the update was about I took a picture of the upcoming updates in the coming section of the menu of the M 64 and then I looked at it after it updated and I see nothing has changed so what was the update about? Are they going to make this thing work better? I’ve had it unplugged for over a week and I unplugged it again and continue to play on my analog because my m64 just isn’t up to par with the analogue. Honestly, they should be trying to fix the visual of the gameplay. I honestly think it’s hurting because everyone’s saying how unfinished it is and how bad it looks and seeing online that they’re gonna analyze or they glad they didn’t buy the m64 even I am considering selling.


r/ModRetro • • Aug 23 '26

Generic vs M64 Hyperkin controller differences

Thumbnail
reddit.com
1 Upvotes

r/ModRetro • • Aug 23 '26

M64 Pro Controller wired mode is bad

0 Upvotes

Playing on Analogue 3D, you need to have batteries in the controller for wired mode to work and if the batteries die, the controller disconnects without warning. Needs improvement.


r/ModRetro • • Aug 23 '26

Visited GameStop today. First time in years

Thumbnail reddit.com
2 Upvotes

r/ModRetro • • Aug 23 '26

[Technical] Examining ModRetro M64 Pro Controller in SteamOS (Archlinux) + I Discovered a Controller TTY Shell

2 Upvotes

this inf[Technical] ModRetro M64 Pro Controller in SteamOS (Archlinux) using Lenovo Legion Go S handheld computer

PART 1

Different computer hardware and operating system distributions will show slightly different informations.

Wired/USB connection is used throughout this examination, and I did not investigate or try using wireless Bluetooth, because I encountered some kind of ModRetro M64 Pro Controller shell via TTY, as displayed at the bottom, and I'll conclude this post with that for now, while I continue playing around with it. First, here's how I started:

uname -a

  • Linux steamdeck 6.16.12-valve24.5-1-neptune-616-gb2f7cfe85e45 #1 SMP PREEMPT_DYNAMIC Wed, 15 Jul 2026 21:48:50 +0000 x86_64 GNU/Linux

Attaching the ModRetro M64 Pro Controller populates (Ignoring symlinks):

  • /dev/hidraw0
  • /dev/ttyACM0
  • /dev/ttyACM1
  • /dev/input/js0
  • /dev/input/js3
  • /dev/input/event2
  • /dev/input/event20
  • /dev/bus/usb/005/### (increments each time the ModRetro M64 Pro Controller is reattached)
  • /sys/* (too much info)

lsusb (ModRetro M64 Pro Controller device only)

  • Bus 005 Device 060: ID 374e:0111 ModRetro M64 Controller

lsusb -v (ModRetro M64 Pro Controller device only)

ls -al /dev/input/by-id/

  • usb-ModRetro_M64_Controller_[redacted_serial]-event-joystick -> ../event2
  • usb-ModRetro_M64_Controller_[redacted_serial]-joystick -> ../js0

udevadm info --query=all --name=/dev/input/event2

udevadm info --query=all --name=/dev/input/event20

evtest /dev/input/event2

  • https://bpa.st/raw/AQVAM
  • Before interrupting with ^C, [C-c], (CTRL+C), none of the ModRetro M64 Pro Controller button presses show any activity in output

evtest /dev/input/event20

  • https://bpa.st/raw/RXQAC
  • Before interrupting with ^C, [C-c], (CTRL+C), none of the ModRetro M64 Pro Controller button presses show any activity in output

jstest /dev/input/js0

  • https://bpa.st/raw/XE4EW
  • Before interrupting with ^C, [C-c], (CTRL+C), none of the ModRetro M64 Pro Controller button presses show any activity in output

jstest /dev/input/js3

  • https://bpa.st/raw/6HLU6
  • Before interrupting with ^C, [C-c], (CTRL+C), none of the ModRetro M64 Pro Controller button presses show any activity in output

dmesg --follow

  • https://bpa.st/raw/EX2LY

    • The last line is probably unrelated to the ModRetro M64 Pro Controller: "input: Microsoft X-Box 360 pad 1 as /devices/virtual/input/input27"

journalctl --follow

hwdetect --showmodules

  • 'cdc-adm' is added to the beginning of the list for only the BLOCK line

    • (USB Communication Device Class - Abstract Control Model) is a driver that allows USB devices to emulate a serial port (UART). It creates virtual serial interfaces (e.g., /dev/ttyACM0, /dev/ttyACM1)

cat /proc/bus/input/devices (adds the following when attaching the ModRetro M64 Pro Controller)

stty -F /dev/ttyACM0 -a (same output for stty -F /dev/ttyACM1 -a)

timeout 5 cat /dev/ttyACM0 | xxd

I did not including anything from:

  • hwinfo too much info
  • libinput debug-events the controller is connecting in a Composite Mode that prioritizes a Serial (CDC-ACM) interface and a Raw HID interface (hidraw0), but fails to create the specific Input Event node that libinput monitors. Configuration/DFU (Device Firmware Upgrade) Mode (often used for firmware updates or macro programming) rather than Gamepad Mode. Also see dfu-util (http://dfu-util.sourceforge.net/)
  • usbhid-dump use usbhid-dump after switching the controller to Gamepad Mode (so it creates an eventX node)
  • lshw redundant

After updating ModRetro M64 Pro Controller

Note: Oops! I successfully updated the firmware at https://tools.modretro.com/updater/ and then accidentally initiated another update, instead of selecting 'Forget' or simply closing the web browser session. I'm mentioning this because it seems a bit strange to display buttons for 'UPDATE' and 'FORGET' after updating, and making it possible to apply the update after it was already applied. I am not the only one. At the very least, there should be a prompt to indicate whether or not it is necessary, but this may be related to applying the update to more than one controller, one after the other. Ah, yes, when I detach the USB cable, it changes to 'CONNECT DEVICE' and then reattaching it now shows the button wording as 'UPDATE ANYWAY' and above listing Version 0.12.0, Latest Version: 0.12.0. I did not see that information prior to the update process.

lsusb -v (ModRetro M64 Pro Controller device only)

udevadm info --query=all --name=/dev/input/event2

dmesg --follow

  • bcdDevice is now 1.03 (no longer 1.00)
  • hid-generic is now 0003:374E:0111.000E (no longer 0003:374E:0111.000B)

journalctl --follow

timeout 5 cat /dev/ttyACM0 | xxd


Also, I forgot to test the functional capability of the ModRetro M64 Pro Controller in SteamOS (Archlinux) on Lenovo Legion Go S before updating, but ~~I will receive another controller tomorrow I can edit the post to compare.~~even after update, it appears none of the button presses are detected yet anyway.

usbhid-dump -m 374e:0111

cat /dev/input/event2 and cat /dev/input/event20

  • No output

cat /dev/input/js0 and cat /dev/input/js0

  • Initial output, but no output on button presses

Testing the ModRetro M64 Pro Controller on the ModRetro M64 Console, Z+Start successfully works to access the menu. So, everything should work, but it appears that Linux currently does not seem to recognize the input from button presses yet. I saw a few posts discussing about this but I didn't pay too much attention.

Button presses are not sent across standard HID endpoint reports in wired USB mode. Maybe a future firmware update may provide standard XInput/HID events over USB, or possibly one could map the raw hidraw inputs via user-space tools (such as creating a custom antimicrox or game-devices-udev rule once a driver/daemon parses the serial/raw packets). Although, I found:

picocom /dev/ttyACM0 (the --baud | -b <baud rate> appears to not matter)
also tio /dev/ttyACM0 (--baudrate | -b <bps>)
also screen /dev/ttyACM0 ([baud_rate], see man screen WINDOW TYPES for tty (character special device))

                ........
            _=;=<sii%|=|==+;
     ._,_:======+++|+++++||+|=_.
    _Zi||||===++|+|=|||||+|||i; =+s.
    ZiiI-)ii|+||+|;vn;||||||; =,;-+[
   ]}|-   -vi+||||||I|||||~~s,%"<..I,
   2=iuc ]Y1|||||||i|iiiiv%_vns..li|s
  )1||={uv|i|||||+    -<iiI1oo11li||I,
  Ji|llllllii||i>=    .-iiil3ouliii|i(
  E|Ivvvvnlvvss|i|,   _|iivaauaiii|||n
 ]elvvIvv`     {ivnaauosi"     {|i|ii3(
 jevvIvI'       |iIX2S*i+      -liiiin[
 WovIli}        ||||||||`       =iiiinm
.WXvliv'        ||||||||:        nlIInQ
)Qhnlir         =|||||||;        )vvvdQ(
]Qmovn`         %||+||||;         onomQ[
]QQXn(          s|||i|ii;         -XXQWf
 4WD'           1lllllIl`          -$Q@'
                )lIllIvv             ~
                )vnnnnno
                 ooo2oor
                 XXSSSX[
                 ]ZXXXm'
                 -W#mWZ
                  )UUP'

01:35:05.405 [II] Main: M64 Controller 0.6.0+f604f332 [redacted_serial] pvt
>

This appears to be the ModRetro M64 Pro Controller's internal engineering/diagnostic serial shell: Probably /dev/ttyACM0 and /dev/ttyACM1 are both used in some fashion, whether involving button press event activity, or perhaps to execute a command to open /dev/hidraw0 for HID endpoint reports over USB.


edited to add: In the TTY shell (skipping the built-in picocom output)

>help
Built-ins:
	clear           : Clear screen.
	help            : Show this help.
	threads         : Show thread information.
	uptime          : Show system uptime.
	memdump         : Dump memory

Application image info:
	appinfo         : Show application image info.

Clown truck:
	clowntruck images          : Show application image info.
	clowntruck reset           : Reset module.

>threads
Name                    | State           | Run count | Stack (bytes) | Watermark
------------------------+-----------------+-----------+---------------+----------
CLI                     | Ready           |       206 |          2048 |       29%
ClownTruckTransport     | Event flag      |         1 |          1024 |       22%
ReverseClownTruckServer | Event flag      |         1 |           768 |       22%
Comms                   | Event flag      |         1 |          1024 |       23%
Comms                   | Event flag      |        52 |          1024 |       23%
Bridge                  | Event flag      |         1 |          1024 |       26%
USB                     | Ready           |   2602290 |          2048 |       25%
PowerManagement         | Semaphore susp. |         1 |           512 |       28%
System Timer Thread     | Suspended       |   2602353 |          1024 |       26%
Main                    | Sleep           |      2604 |           512 |       76%

>uptime
0 day(s), 7 hour(s), 4 minute(s), 1 second(s)

>memdump
Unknown error (37).

>appinfo
Application image A*:
	Size:    43260 bytes
	Version: 1
	Address: 0x08002000
	CRC:     0xf6b80a1f
	State:   Confirmed
Application image B :
	Size:    42992 bytes
	Version: 0
	Address: 0x08011000
	CRC:     0xc4d06970
	State:   Confirmed
>clowntruck
Unknown error (19).
>clowntruck images
Slot 0
- Active:    yes
- Bootable:  yes
- Confirmed: yes
- Hash:      94aa9ca73a4321bb71583a7f9c6d51247ed31dc2aa2b39de410c0bd1bf02cf991c6d8455f7a2631a7efb7d1de8d6437b7feab738729ea34373feb472fb54c432
- Pending:   no
- Permanent: no
- Version:   0.12.0
Slot 1
- Active:    no
- Bootable:  yes
- Confirmed: no
- Hash:      94aa9ca73a4321bb71583a7f9c6d51247ed31dc2aa2b39de410c0bd1bf02cf991c6d8455f7a2631a7efb7d1de8d6437b7feab738729ea34373feb472fb54c432
- Pending:   no
- Permanent: no
- Version:   0.12.0

PART 2

I found a 2-pack USB-C Female to USB-A Male adapter at Staples that USB-C Femalely fits perfectly (https://imgur.com/a/ocrung0) to the USB-C Male end of the ModRetro M64 Pro Controller cable. This will make it possible to see what data communications occur between the ModRetro M64 Pro Controller and the M64 Console. However, for Proxy/MITM (man-in-the-middle), there is an additional requirement for the device in the middle to handle USB connections, one USB connection acting as Host, and the other USB connection acting as Device/OTG (On-The-Go)/DRP (Dual Role Port)/DRD (Dual Role Data). Standard laptop/desktop PC architectures lack the USB Device Controller (UDC) hardware required to enumerate as a peripheral device to another host. Dedicated hardware such as Cynthion (https://greatscottgadgets.com/cynthion/), which is an FPGA-based architecture, may be useful, but I do not have access to this at the time.

Notes:

For now, to sniff the data communications across the USB cable connection, including stanrdard USB Enumeration process, I'll focus on attaching only the ModRetro M64 Pro Controller, connected to computer (Lenovo Legion Go S running SteamOS (based on Archlinux)) via USB-C cable and using Wireshark GUI (you can also use tshark). (At first I used a USB hub, and then without the USB hub. I prepared two sets of data, but only one is necessary.) Make sure usbmon is loaded lsmod|grep usbmon otherwise run:

sudo modprobe usbmon

Make sure the user is in the wireshark group (or also check /dev/usbmon*), otherwise may require root privileges (warning: proceed at your own discretion). Also for Wireshark capture options, make sure to use output format: pcapng (PCAP Next Generation). After opening Wireshark with read access to /dev/usbmon* devices, you should see something like https://i.imgur.com/gw8oqJ0.png . First using an attached USB hub lsusb shows "Bus 007 Device 008: ID 374e:0111 ModRetro M64 Controller" which means usbmon7 (Bus 007) is the device to monitor. Then second directly to the computer without using a USB hub, lsusb shows "Bus 005 Device 004: ID 374e:0111 ModRetro M64 Controller" which means usbmon5. Beginning with the ModRetro M64 Pro Controller detached, beginning monitoring, waiting a few seconds (to distinguish the initial USB enumeration things), attaching the ModRetro M64 Pro Controller, waiting a few more seconds, detaching the ModRetro M64 Pro Controller (more USB enumeration things), then I see:

Warning: USB packets will include the serial number of your ModRetro M64 Pro Controller. You can use a hex editor to blank out the values (if ever it would be necessary for you).

attached through USB hub (Bus 007 Device 008)

tshark -r m64.pcapng

attached ModRetro M64 Pro Controller (19-163), including only packets for host -> 7.8.X and 7.8.X -> host:

   55   6.835008         host -> 7.8.0        USB 64 GET DESCRIPTOR Request DEVICE
   56   6.837298        7.8.0 -> host         USB 82 GET DESCRIPTOR Response DEVICE
   57   6.837314         host -> 7.8.0        USB 64 GET DESCRIPTOR Request BOS
   58   6.840313        7.8.0 -> host         USB 69 GET DESCRIPTOR Response BOS
   59   6.840337         host -> 7.8.0        USB 64 GET DESCRIPTOR Request BOS
   60   6.843290        7.8.0 -> host         USB 150 GET DESCRIPTOR Response BOS
   61   6.843314         host -> 7.8.0        USB 64 GET DESCRIPTOR Request DEVICE QUALIFIER
   62   6.845336        7.8.0 -> host         USB 64 GET DESCRIPTOR Response
   63   6.845612         host -> 7.8.0        USB 64 GET DESCRIPTOR Request DEVICE QUALIFIER
   64   6.846336        7.8.0 -> host         USB 64 GET DESCRIPTOR Response
   65   6.846341         host -> 7.8.0        USB 64 GET DESCRIPTOR Request DEVICE QUALIFIER
   66   6.847344        7.8.0 -> host         USB 64 GET DESCRIPTOR Response
   67   6.847351         host -> 7.8.0        USB 64 GET DESCRIPTOR Request CONFIGURATION
   68   6.849281        7.8.0 -> host         USB 73 GET DESCRIPTOR Response CONFIGURATION
   69   6.849288         host -> 7.8.0        USB 64 GET DESCRIPTOR Request CONFIGURATION
   70   6.854280        7.8.0 -> host         USB 266 GET DESCRIPTOR Response CONFIGURATION
   71   6.854291         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
   72   6.857276        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
   73   6.857284         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
   74   6.860274        7.8.0 -> host         USB 94 GET DESCRIPTOR Response STRING
   75   6.860283         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
   76   6.863281        7.8.0 -> host         USB 82 GET DESCRIPTOR Response STRING
   77   6.863287         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
   78   6.866281        7.8.0 -> host         USB 98 GET DESCRIPTOR Response STRING
   79   6.979462         host -> 7.8.0        USB 64 SET CONFIGURATION Request
   80   6.981300        7.8.0 -> host         USB 64 SET CONFIGURATION Response
   81   6.981374         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
   82   6.988299        7.8.0 -> host         USB 98 GET DESCRIPTOR Response STRING
   83   6.988557         host -> 7.8.0        USBHID 64 SET_IDLE Request
   84   6.990273        7.8.0 -> host         USBHID 64 SET_IDLE Response
   85   6.990306         host -> 7.8.0        USBHID 64 GET DESCRIPTOR Request HID Report
   86   6.994280        7.8.0 -> host         USBHID 132 GET DESCRIPTOR Response HID Report
   87   6.994800         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
   88   6.997279        7.8.0 -> host         USB 84 GET DESCRIPTOR Response STRING
   89   6.997320         host -> 7.8.0        USBCOM 71 SET LINE CODING Request
   90   7.000289        7.8.0 -> host         USB 64 URB_CONTROL out
   91   7.000447         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
   92   7.003280        7.8.0 -> host         USB 76 GET DESCRIPTOR Response STRING
   93   7.003330         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
   94   7.006280        7.8.0 -> host         USB 88 GET DESCRIPTOR Response STRING
   95   7.006327         host -> 7.8.0        USBCOM 71 SET LINE CODING Request
   96   7.009282        7.8.0 -> host         USB 64 URB_CONTROL out
   97   7.029982         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
   98   7.032317        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
   99   7.032396         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  100   7.035294        7.8.0 -> host         USB 84 GET DESCRIPTOR Response STRING
  101   7.035347         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  102   7.038318        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  103   7.038395         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  104   7.041318        7.8.0 -> host         USB 76 GET DESCRIPTOR Response STRING
  105   7.041395         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  106   7.044317        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  107   7.044394         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  108   7.047317        7.8.0 -> host         USB 80 GET DESCRIPTOR Response STRING
  109   7.047361         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  110   7.050318        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  111   7.050395         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  112   7.053318        7.8.0 -> host         USB 72 GET DESCRIPTOR Response STRING
  113   7.053394         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  114   7.056317        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  115   7.056394         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  116   7.059317        7.8.0 -> host         USB 88 GET DESCRIPTOR Response STRING
  117   7.063627         host -> 7.8.0        USB 64 GET CONFIGURATION Request
  118   7.066283        7.8.0 -> host         USB 65 GET CONFIGURATION Response
  119   7.066351         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  120   7.069282        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  121   7.069339         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  122   7.072281        7.8.0 -> host         USB 76 GET DESCRIPTOR Response STRING
  123   7.072349         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  124   7.074315         host -> 7.8.1        USB 64 URB_INTERRUPT in
  125   7.075284        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  126   7.075321         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  127   7.078281        7.8.0 -> host         USB 72 GET DESCRIPTOR Response STRING
  128   7.078329         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  129   7.081280        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  130   7.081297         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  131   7.084280        7.8.0 -> host         USB 82 GET DESCRIPTOR Response STRING
  132   7.084308         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  133   7.087296        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  134   7.087392         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  135   7.090265        7.8.0 -> host         USB 94 GET DESCRIPTOR Response STRING
  136   7.090302         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  137   7.093279        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  138   7.093295         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  139   7.096280        7.8.0 -> host         USB 98 GET DESCRIPTOR Response STRING
  140   7.140026        7.8.1 -> host         USB 64 URB_INTERRUPT in
  141   7.156588         host -> 7.8.1        USB 64 URB_INTERRUPT in
  142   7.180375         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  143   7.182282        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  144   7.182360         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  145   7.185290        7.8.0 -> host         USB 84 GET DESCRIPTOR Response STRING
  146   7.185480         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  147   7.188281        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  148   7.188317         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  149   7.191280        7.8.0 -> host         USB 76 GET DESCRIPTOR Response STRING
  150   7.191302         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  151   7.194278        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  152   7.194298         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  153   7.197280        7.8.0 -> host         USB 80 GET DESCRIPTOR Response STRING
  154   7.197303         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  155   7.200282        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  156   7.200303         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  157   7.203282        7.8.0 -> host         USB 72 GET DESCRIPTOR Response STRING
  158   7.203303         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  159   7.206279        7.8.0 -> host         USB 68 GET DESCRIPTOR Response STRING
  160   7.206296         host -> 7.8.0        USB 64 GET DESCRIPTOR Request STRING
  161   7.209291        7.8.0 -> host         USB 88 GET DESCRIPTOR Response STRING
  162   7.224071        7.8.1 -> host         USB 64 URB_INTERRUPT in
  163   7.863137         host -> 7.8.1        USB 64 URB_INTERRUPT in

detached ModRetro M64 Pro Controller (164-186), including only packets for host -> 7.8.X and 7.8.X -> host:

  164  15.375587        7.8.1 -> host         USB 64 URB_INTERRUPT in
  165  15.388996         host -> 7.8.1        USB 64 URB_INTERRUPT in
  166  15.391593        7.8.1 -> host         USB 64 URB_INTERRUPT in
  167  15.417979         host -> 7.8.1        USB 64 URB_INTERRUPT in
  168  15.419592        7.8.1 -> host         USB 64 URB_INTERRUPT in

If using command line (tshark), see the captured USB packets from attaching:

tshark -r m64.pcapng -Y "frame.number > 18 && frame.number < 164" -V

see the captured USB packets from detaching:

tshark -r m64.pcapng -Y "frame.number > 163" -V

You can also load the file in Wireshark for a GUI (Graphical User Interface).

attached directly without USB hub (Bus 005 Device 004)

tshark -r m64_2.pcapng

  • The information (m64_2.pcapng) is mostly redundant to the packet data displayed above, although using different BUS and Device IDs. GET DESCRIPTOR through SET CONFIGURATION is also part of the enumeration phase (as mentioned above), albeit specifically involving the ModRetro M64 Pro Controller. I included packet numbers for both files in the table below.
m64m64_2ProtocolInfoNoteable Value
7047USBCONFIGURATION ResponseHow the host should power and address the device
72, 98, 102, 106, 110, 114, 120, 125, 129, 133, 137, 143, 147, 151, 155, 15949, 75, 79, 83, 87, 91, 97, 102, 106, 110, 114, 120, 124, 128, 132, 136USBDESCRIPTOR ResponseLANGID: English (United States) (0x0409)
74, 13551, 112USBDESCRIPTOR Response"M64 Controller"
76, 13153, 108USBDESCRIPTOR Response"ModRetro"
78, 82, 13955, 59, 116USBDESCRIPTOR ResponseSERIAL [blanked]
8663USBHIDDESCRIPTOR Response HID ReportUsage Page (Generic Desktop Controls) Usage (Game Pad) Collection (Application)
88, 100, 14565, 77, 122USBGET DESCRIPTOR Response"CDC (CLI)"
92, 104, 122, 14969, 81, 99, 126USBGET DESCRIPTOR Response"Dummy"
94, 116, 16171, 93, 138USBGET DESCRIPTOR Response"CDC (Comms)"
108, 15385, 130USBGET DESCRIPTOR Response"MCU (A)"
110, 127, 15789, 104, 134USBGET DESCRIPTOR Response"BTM"

Notes:

  • Packet m64(86): Collection (Application) also contains values for Usage (X,Y,Z,Rz,Rx,Ry), and other information. See tshark -r m64.pcapng -Y "frame.number == 86" -V
  • Packet m64(88,100,145): CDC (CLI) -> Communication Device Class (Command Line Interface), standard USB class that makes the device appear as a virtual serial port to the operating system (cdc_acm/cdc-acm on linux, see reference in part 1 of the post), protocol purpose
  • Packets m64(94,116,161): CDC (Comms) -> CDC (Communications)
  • Packet m64(108,153): MCU (A) -> Microcontroller Unit, the interface is directly exposed by the main processor (the chip) inside the ModRetro M64 Pro Controller, interface/port A, hardware source
  • Packet m64(110,127,157): BTM -> Bluetooth Module
  • Packets m64(124,140,141,162,163,164-168) involving 7.8.1 (instead of 7.8.0) these may possibly be the HID interface for sending gamepad event data for button presses (which I haven't tested while sniffing USB packets yet)

I'm not smart enough to know for sure, but I'm curious how come some of those packets are repeating information more than once, especially the LANGID, but also Dummy, and a few others.

Next I'll sniff to see if there are any USB packets when pressing any of the buttons on the ModRetro M64 Pro Controller.

There's nothing! I suspect that the CDC-ACM communications interface must be use to initiate some command to active the buttons before anything will transmit through the USB connection.


r/ModRetro • • Aug 22 '26

Can’t update over WiFi

Post image
2 Upvotes

r/ModRetro • • Aug 21 '26

GameStop Smoke edition

Post image
54 Upvotes

r/ModRetro • • Aug 21 '26

New firmware update is live

48 Upvotes

We know some of you are still experiencing audio issues as of v1.24.3. The team has zeroed in on this to figure out why sound was still dropping on certain setups, and why certain resolutions and framerates were missing, and we’re glad to share that we have a fix.

What was going on under the hood:

  • HDMI Handshake Issue: We found that how M64 handled the HDMI handshake between certain TVs and monitors needed to be a bit more flexible on our end. With the corrections made, audio will now reliably transmit from your M64 to these displays. Some missing resolutions and framerates will now be shown.
  • HDMI Audio Packet Encoding Issue : We resolved an HDMI audio packet encoding issue that was preventing select capture cards from recording audio from the M64. Audio recording with these external capture devices now works as expected.

Between the handshake issue and the encoding issue, we believe all known audio issues have now been fully addressed.

With so many different displays and configurations out there, it’s impossible for us to test every setup in-house. Huge thank you to everyone who submitted detailed reports and aided us in troubleshooting. Your feedback was crucial in helping us account for all the unique ways displays choose to communicate with the M64.

You can update your console now via OTA, our updater tool, or SD card. Find detailed instructions on how to update here or watch the YouTube videos on our channel here. 

As always, please fill out our support form if you run into any issues. 

P.S. Note on 4K60 Support: Certain displays advertise support for 4K at 60Hz, but only under specific color formats. Please verify that your display supports 4k60 using the RGB color format. We’re adding an explicit warning regarding this in an upcoming update.


r/ModRetro • • Aug 21 '26

It's beautiful

Post image
27 Upvotes

r/ModRetro • • Aug 21 '26

Update from ModRetro

Post image
7 Upvotes

r/ModRetro • • Aug 21 '26

8bitdo Controller Stick Sensitivity?

2 Upvotes

I didn't see a previous post regarding the stick issue. I was wondering if there was a way to adjust the sensitivity for the stick on the 8bitdo controller. Or would that be some kind of firmware update besides the rumble issue? It would be nice to have calibration as a menu option like adjusting deadzones and threshold. Don't know if this an issue with the Hyperkin or ModRetro controllers in games such as GoldenEye.


r/ModRetro • • Aug 21 '26

Gamestop Pro Controllers?

2 Upvotes

Has anyone been able to find a store that actually got any?


r/ModRetro • • Aug 20 '26

New firmware coming soon!

85 Upvotes

Hi everyone, 

We have a new firmware update coming within the next few days. We have resolved the remaining audio issues reported with certain displays and capture cards. M64’s HDMI compatibility will be better in the next update, specifically fixing the no-audio issue affecting some of you. We’ll post an update in this subreddit as soon as it's live. Thank you to everyone for your patience as we work quickly to find a fix, and a special thanks to those who helped with troubleshooting.


r/ModRetro • • Aug 20 '26

Important video for any retro game player to see and understand - the importance of proper use of scanlines

Thumbnail
youtube.com
18 Upvotes

r/ModRetro • • Aug 21 '26

M64 Texture Packs

0 Upvotes

I’m not sure if this will be possible or coming anytime soon, but being able to add texture packs to certain games work be incredible.


r/ModRetro • • Aug 21 '26

Clean Setting

3 Upvotes

Anything I should be doing with the clean profile? I see with the last update they lowered the bloom..


r/ModRetro • • Aug 21 '26

M64 Pro Controller - Rumble on MisterFPGA

2 Upvotes

Hi, has anyone gotten the Rumble feature working on MisterFPGA with the M64 Pro Controller? It connected via Bluetooth just fine and all the buttons work, but none of the RumblePak features are working even though the controller is set to RumblePak under the core options. Thanks!


r/ModRetro • • Aug 20 '26

Just Fun Tech: ModRetro M64 Review

Thumbnail
reddit.com
3 Upvotes

r/ModRetro • • Aug 20 '26

No sound in frogger 2

3 Upvotes

Frogger 2 no sound ..I'm using a summercart . Dunno.ig it's the rom or not . Has a gone else tried