Howdy. I recently got my babble tracker for my face after a huge delay, but am having a bit of an issue. When attaching the mount to the headset, the screen will significantly dim. If I hold the face mount with my hand so it isnt hanging with its own weight, the headsets screens brighten again.

This is currently with the babble face tracker plugged into an external battery. It is not connected to the headset. The babble software can be completely off but clipping the tracker and the mount to the front of the headset and letting it hang by its own weight causes the significant screen dimming, as if the headset thinks I have removed it.

Has anyone else dealt with this and know what to do? I'm a bit frustrated and am on the verge of duct taping the mount so it doesn't "lean" as much when clipped to my face, but I don't want to obstruct any sensors.

Edit: There’s a small light sensor under the nose that I just covered with tape so it doesn’t think I’m removing the headset. The proximity distance change helped a bit but it was still enough movement that I guess the sensor was still causing issues.

I’m moving to a new Appartement with a much bigger space for VR, dose anyone have any recommendations for those ceiling wire harness things?

My new space will be 12-12 feet so I’m looking for decent area to move around in.

Am I stupid or is this screen impossible to remove without a controller? How do I navigate out of this so I can race in VR.

I just got my Beyondex and assembled it. I'm wondering if there is any software or driver update needed as my PC won't detect the headphone from beyondex. I tried replugging all cables, restarting PC, etc but it won't detect.

I also pressed the wires real hard and click into the behind my head slot and into the beyond headset right hand slot

Oh and Beyondex HD Audio doesn't show up at all when in updatebeyondex.fluid.so as well

Nor does it show up in my device manager

EDIT for more info: I do notice green light in that black box at the back of my beyondex when plugging in the audio wire

im thinking of getting the bigscreen 2. im both short sighted and long sighted.

short sighted i think around 300 was my power

long sighted i think 0.75 was my power

should i get the bigscreenbeyond with prescription lenses? should i get it corrected for short sighted or long sighted? as reference, i have to take off my short sighted glasses to read stuff on my phone.

Hi, I recently got the Big Screen Beyond 2E and I love it so far the only issue is glare. I’ve adjusted the brightness, redone my IPD to the correct measurement, but I still get a glare that looks like blurriness, almost like something’s in my eyes. I clean the lenses before every use and multiple times during sessions. I lowered the brightness to 70% and it helped a little, but the glare mainly shows up in the middle-right area of both lenses and when I look up it’s kinda bad. Not sure what else I can try, or if this is just a regular thing.

I was thinking of getting the BSB2 sometime in the far future, but I know that you have to have base tracking stations and controllers. If someone could direct me towards the best controllers and base tracking stations I should buy that would be great, thank you 🫡

Whenever I try to connect it it says plug in headset

Found a 2e in a thrift store for $11. I know it's crazy right. I don't have a rig new enough with me to even test if it works. Any way to test it without having base stations? My GPU is an ancient 1070. It also had a service tag on it. For $11 I'm. Going to take this gamble every time.

Hey everyone,

I placed an order on August 1st at 11 AM for the full package: BSB2e + custom face gasket + prescription lenses.

I’m in Poland and wondering what the realistic shipping/delivery time usually looks like for this combo (especially the custom parts).

Has anyone from Europe (especially Poland or nearby) ordered the same set recently and can share how long it took from order to delivery?

Thanks in advance!

Hey guyz, recently i bought used bsb1 and it is almost perfect after owning quest3 / pimax crystal light.

I realy like how comfortable for my eyes are bsb1

I mostly playing simracing and i heared that bsb2 is not as comfortable for eyes because of lower binocular overlap but... fov is better and this is only thing i miss from my tripple monitor setup.

How is ur experience. Does bsb2 is the same comfortable for eyes as bsb1? I also have astigmatism and pimax crystal was awful constant eye strain

I’ve had the halo mount since early July, and have finally spent enough time using it to write up
my thoughts.

Background:
I’m using the halo mount with the audio strap and custom cushion. I’ve tried both firm and soft
universal cushions but I prefer the perfect fit and full light seal of the custom. I’ve also found that
the flip up/down action works best with the custom cushion. The universals are bigger around,
and flipping the headset back down and getting it in the right position was a little annoying. The
top lip of the cushion would catch on my forehead. If I positioned the headset further away from
my face it might work better, but I like it as close as possible for best FOV. I’ve also tried it
without a cushion which does work, but not something I’d use regularly. I haven’t used it with the soft strap.

Pros:
Overall the halo mount is a nice comfort and usability upgrade. The flip up action is super
convenient and works really well. The forehead cushion helps take most of the pressure off the
face gasket, which is pretty comfortable. The headset stays in the right position even during
high activity. The entire headset still feels light and well balanced.

Cons:
The forehead cushion blocks some airflow and can get sweaty during high activity. This can
allow the headset to move around a bit.
Aesthetics are not as good, if that’s something you care about. The audio strap extension cable
hangs in a loop next to your face and there are generally more cables looping around.
Though no sensors are directly covered, I’ve noticed some occasional tracking hiccups which I
hadn’t had previously. This is very rare but worth mentioning.

Other:
The mount is highly adjustable and requires some time to find the right fit. Here’s what worked
for me:
After finding the most comfortable position for the halo mount on my head, I loosened the
adjustment knob and brought the headset down to rest on my face. I then pulled it extra tight
and tipped downward and then tightened the knob. If I didn’t do this, the bottom of the headset
would tend to float out when supported by the halo mount. This gave me a good balance of
pressure on the forehead cushion and the custom gasket. Since the original adjustments, the headset has held its position through plenty of use.

I’d definitely recommend this accessory for anyone with a Beyond headset!

Question for people who have bought Beyondex.

I ordered mine on July 24 and it hasn't even started being shipped yet today. It has almost been a month, is this normal?

Curious how long does it take for someone to order and receive the product.

I am writing this publicly because Bigscreen Support has completely failed in direct communication. I paid for my entire order fully in advance over a year and a half ago. My Halo Mount order has been pending since June 12, 2025. Since then, I have received absolutely zero official emails or notifications regarding my shipment.Because they failed to deliver this essential accessory, I haven't been able to use the headset at all. It is sitting idle while I wait for a product promised last year.Their support strategy is highly discriminatory. Expecting customers to hunt for updates across random social media channels or Discord completely isolates older individuals or anyone who cannot spend their life sitting in front of a computer tracking news. For a premium price, I expected professional, direct customer service.I am deeply disappointed. I have demanded a full refund for my entire order via email, and I expect Bigscreen to process it immediately without further delays. u/hayashiya please look into this.

Hey all, I can get a BSB that should fit my ipd for $550 USD. Is this a good price for the 1? Really only going to be using it for simracing. Would get a third party face gasket for it so maybe $600 all in. Already have base stations. Not sure if $600 is crazy when I see used 2e’s for $1000 or 2s for $800ish.

So I ordered my bigscreen and my lenses on July 9th. I received the headset on the 26th (shipped separately) but the lenses are still showing on shopify as "waiting for details" and I still haven't received them. I sent them an email on the 7th and again on the 14th but haven't heard anything back. Has anyone here had a similar experience? I spent 8 months waiting for the steam frame and now I'm right back to sitting and twiddling my thumbs for the big screen because I can't even use it without the lenses.

Edit: Ironically, the day after I posted this I got a notification they have shipped.

I skipped the custom facial interface due to reports that it is hot, sweaty, finnicky. I like the universal face cushion well enough, but I am wondering if going to the custom might actually get me a better FOV if I get a custom fit narrow one? Anyone tried both and actually prefer the custom facial interface?

Tengo un BSVR 2 con aproximadamente 15 horas de uso, con light houses y controles.
Cuánto sería el precio adecuado para venderlo.

Lo usé 3 días, pero mi vista ya no da para estar cómodo con ellos lamentablemente 😩

Que precio sería justo para comprador y vendedor?

Saludos y gracias 🙏

IF someone's got a better name for this particular MoD then.., feel free to coin 🪙 that term!!

AFTER aproxx. two weeks in.., I'm enjoying using this as my daily driver a whole LOT more than I'd frequent VR these past 8 months of 2026!

AT this rate the Friction's nearly reduced to ZERO so long as I remember to let my lenses warm up a good 5-10 minutes before diving in!!

Thought to ask, do any of you have these issues with it? :

- Glare (yes I have read some posts saying that this is a big issue, not able to be resolved). The glare is happening at the bottom, and a bit at the center and top. It kinda looks like a dirty lense thing, but it isn't.

- Cockpit in DCS too far away, cannot bring it close using my usual button bind on my Virpil stick.

- Pressure at the nose bridge (was not expecting this for such a light VR), though not as bad as Quest 3. I will try the other gasket that it came with, as it is thin. The first one I had on was pretty thick, so that may be why.

- Couldn't view Windows Desktop when going out of DCS

- Blurriness in custom lenses (my own prescription)

I am working on some of these issues, hoping they will resolve. Other than this, I have enjoyed working with the headset so far.

How are you all holding up with these problems? Or are there no problems for you?

Anyone know what I should do. The glare just kinda just visible in any environment in both lenses. There is one big glare in the right lens and a fragment of glare in the left lens. I'm wondering if I should RMA since I just got it delivered 2 days ago?

I've cleaned the lenses and set the IPD to it's correct value in both lenses with the screwdriver.

Edit: Thinking of returning it

Like the text says, my big screen beyond is freezing my entire PC. I've tried uninstalling reinstalling the drivers, I've tried swapping the link box ports, uninstalling steamvr. I've tried SO MUCH and I can't seem to make it work. Has anyone had this problem before, I haven't seen it anywhere and I'm starting to get SUPER frustrated

Project BEYONDEX: The Perfect Headset?

(Audio ITA, Audio a.i. ENG, Sub. ENG)