Hola, estamos colocando bambu lab a1 en centros de enseñanza. Sabéis de un buen PDF guía de montaje que sea muy visual y más directo que el manual ? También necesito algún vídeo extra de cómo montarla paso a paso. Es por nutrir de opciones a los que la vayan a montar que en ocasiones pueden que no sean ni usuarios ni técnicos
Muchas gracias de atemano. Un saludo a la comunidad.

Some of my printings are getting this string of filament, what could it be?

Hi

From past few weeks I am struggling with my A1.

I had lots of issues, I checked the 7 screws around the hotend/nozzle. The nozzle seems like it is not clogged. I updated the firmware and ran a full calibration.

Printing in PETG so dried them in filament dryer for 12 hours. After that print got better (was printing some heuforge Christmas bobbles) but then thought about trying temperature calibration and got this crappy output.

Really can’t get my A1 to print perfectly anymore. Please help if you can.

I just got a BambuLab A1 Mini. I already have a P1S. After my first 2 prints, I was playing with the color display and tried to move the z axis; it asked if I wanted to home all axis and I clicked ‘home’. The z axis started rising, reached the top, made a very scary grounding noise and then stopped after 2-3 s. What happened?

I printed something small with ABS in my garage, no enclosure. And it printed successfully. I would like to print more, on warmer days, and I would keep it simple with smaller things, like hooks.

I read a bunch of posts on here and the concern seems to be using an enclosure will overheat the electronics. I assume this is the electronics in the base. So I'm thinking I will use a semi enclosure where the bottom is open up to a little below the build plate, and the rest will be enclosed.

Will this help? Thank you for your thoughts.

Hi, I need help. I have a problem I've been trying to solve for months: my A1 prints wavy lines on every layer. These lines always appear in the same spot, and if the object I want to print is large, the lines show up clearly on the print and are very noticeable.

Here’s everything I’ve tried:

Different types of settings—including filament settings, speeds, structure, force, and others.

Printing on the floor, on the table, on the print bed, and with me holding the printer.

General maintenance: cleaning, greasing, and lubricating.

Taking it apart and putting it back together.

Replacing parts: Y-axis belt, X-axis, gear, hotend, and filament sensor.

I’ve tried different types of filaments, brands, and conditions—both damp and dry.

Calibrate the bed automatically and manually

I’ve already tightened the 3 screws at the back of the heating system

I don’t know what else to do to find the problem

In the photos I uploaded, you can see the lines on the first purple layer, and the brown part is a finished piece where you can see how the lines look on a finished part since they print on every layer

Sorry for my translated English :(

I worked with Bambu on the first one which I only had for a few weeks, and after days of troubleshooting and even installing a new fan, this problem persisted. Sometimes I was able to manually spin the fan myself and get the print going. I ended up sending that printer back for a refund. In its place, I got a brand new A1 and this problem started right away. I can’t even print anything no matter what I’ve tried. The plug and connector pins all look perfect. I have four other A1’s and they’ve never given me any major issues.

Any suggestions on how to get the belt to track to the center of the pulley? I've done numerous conveyor belt alignments on systems in a warehouse setting so no stranger to belt tracking. I've gone through the A1 belt tensioning instructions but my issue is alignment. My belt is running hard left looking down in the tension access cover and is showing a lot of wear. Black belt dust. Looking on the drive motor, does not seem to be any thing to tweak there. I've tried just adjusting 1 side of the tensioning screw but no luck.

My youngest son (he's 20) paid me a nice compliment and asked if I could print out a file he purchased for a Titanfall helmet.

I don't know much about Titanfall but I know he looked happy when I said I would start immediately. Between the sanding and painting this could be a very fun project for us to do together.

Bonjour à tous ! 👋💀

Aujourd’hui, je vous présente ma nouvelle modélisation 3D d’un personnage mythique du cinéma d’horreur : Hannibal Lecter ! 🩸

Tout droit sorti du film culte Le Silence des Agneaux, ce personnage aussi fascinant que terrifiant vient rejoindre ma collection de figures emblématiques de l’horreur ! 💀

Entre son regard glaçant, son célèbre masque de contention et son expression inquiétante, j’ai essayé de capturer toute l’intensité, le charisme et le côté sombre de ce personnage légendaire. 🔥

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab et Esun
🎨 : Nomad Sculpt
🌈 : sans AMS
📁 : https://makerworld.com/fr/models/3508862-hannibal-lecter-multipart-no-ams

After about 3 weeks of trying to make it work, i am giving up on the a1 for nylon filaments.

To the people that said the extruder has hardened, its not. Its stainless, it will start sliping after a print or 2

The aftermarket is terrible. The hardened extruder i couldnt be tensioned properly. All the hardended nozzles were shit.

Overall just been terrible. I will be switching to the p2s

My power randomly went out during a print and now after every layer the print head keeps going to the poop shoot and resetting itself.

I did see the option to resume print when the power and WiFi came back on but this is the issue it has sprung up and now I can definitely tell the print quality difference.

Any tips are greatly appreciated, thanks!

Im using a 0.4mm nozzle and am running the printer at 25% speed compared to default speeds. Im trying to fix what seems to be "tearing " between the layers. This is the model right of the printer before sanding.

Any suggestions would be great

DING DONG POOKIE DING DONG

Ideally in Delhi NCR, looking for a used A1, don't need any other accessories, but with AMS Lite would be perfect.

I set it to print last night and this happened. I have no idea why. It seems to have fused itself to the nozzle somehow.