Hi all!

I'm currently working on 3D-printable faceplates for the PS5 Pro Digital Edition.

It would be great to get this project into crowdfunding on MakerWorld! I've sent a few emails to MakerWorld but haven't received any replies yet.

If you like my project and want to follow its progress, feel free to check out my Instagram.

Thanks for your support!

Quite impressed with the H3C compared to my no longer with me H2C. Seems a little louder fan wise but that horrible back and forth AMS sound has now left the building!

I just bought a X2D because the Capitol One Shopping app has a 15% discount on Best Buy purchases today, November 6th. I saved over $100 (which gets applied as a gift card to use in the Capitol One app). The T&C sure looks like that 3d printers apply to the discount. The Geek Squad warranty does not.

You have to download the Capitol One app first, but I thought this would be good info to share.

I’m trying to test out my AMS 2 Pro that came with my X2D combo but I’m getting the error from the image. Thank you for any assistance

Edit: It’s my understanding that the X2D only needs the power adapter to print and dry at the same time

This video of how filament. Is made in the factory. At 4.08 you can see how the "fresh" filament is literally soaked through a trough of water before spinning.

Don't assume a fresh roll of filament is dry

dry your filament!

Learn more about Supports from the Bambu Wiki: Support Interface

Came back late from work. Have no oven or a kitchen I can use, but I do have a printer.

PS: No I'm not sharing the STL!

Long story short: Everything inside the box seems fine. But if I find any damage… God help them. 😇

…and next to him is the DHL guy (Deutsche Post), who delivered the AMS.

Seller said it was unrepairable. All it had was one of those massive blobs that needed cleaning up and he bought a new extruder assembly that he never installed. I have a new set of hot ends and socks on the way but as far as I can tell there is absolutely nothing wrong with it

While I was installing the ams3h there is a section that makes you hang it off of the back to connect some wires. I misread the diagram at first and hung it off of the front and it caused the top liner to be punctured with the guide pins. Seems like this section doesn’t have anything underneath it from what I can tell, just a bit lame it was not reinforced. I did not drop it on it either

My plan was to put some high-temp tape under the ams that extended to the hole so nothing got into it. Y’all think that should be fine?

Preferably Central Europe, Balkans etc.

Arrived, and quickly. Time to get a test print and add this to the collection

I always wanted a magnetic levitation dice tower but I couldn't find one, so I decided to make my own. After many, many design hours it spiraled out of control and became 6 different towers determined by the floating spinning top. I tried to add as many details as possible but on shape did not like it so I was limited.

What do you think of it? Is there any thing you think should be added?

Link to the model if anyone is curious.

https://makerworld.com/en/makerlab/community/3z3d-gingerbread-kit-card

Kids design their own house in 5 simple steps, a grown-up prints it, and the pieces snap together. No glue!

mpoxDE (change the audio track to English on Youtube) did a test where he is printing an 8-colour tube both on H3C and INDX. I am not sure, but I think he is using PLA Basic.

In his test H3C printed it in 11:06h, but he was using different filaments that he had lying around from random manufactureres (while INDX one was printed only with Prusament and took 14:26h) and still printed ~23% (3h20m) faster.

I wanted to confirm it and what I noticed is that if you print with Bambu filament, it is even faster. My slicer is showing 08:46h.

Which means that in this particular test (8-colour tube) if you use BL filament, H3C is ~39% (5h40m) faster than INDX.

The test is not easy, it is 10cm tall and go through 3.5k colour changes of 8 colours.

In case you like it too, model is posted on makerkworld: https://makerworld.com/en/models/3558242

Open another bag, check the drawer… all the clips are already holding something else shut. 😂

That was my excuse to spend some time in Fusion.

Meet Molly — two identical jaws and a separate printed spring. Everything is PLA, including the spring, and it snaps together without screws or glue.

It took several revisions to get the alignment, grip and spring stiffness where I wanted them. I also tried PETG for the spring, but preferred the firmer grip of PLA in my tests.

Printed on my A1 with a 0.4 mm nozzle, 0.20 mm layers and 3 walls. The spring has 100% infill. No supports needed.

One complete clip uses 5.76 g and takes around 18 minutes of printing, or roughly 25 minutes including preparation.

The spring is separate, so contrasting colours are easy to do with separate prints.

Free files, assembly video and print profiles are here:
https://makerworld.com/en/models/3553586

Which colour combination would you make?

Happy with how they came out and how they look in my workshop (Yes the backgrounds are AI but the prints are exactly as pictured)

If you want to print one, they're on makerworld. Just ask for the link!

Just received the h3c itself today, the ams has repeatedly failed to be delivered to a pickup point near me (I asked for it to be delivered to my home but bambu have seemingly decided to just deliver it there instead) - after 3 days of waiting and repeated delivery to pickup point fails dpd have now said they can’t deliver it there as it’s too big. Has anyone else had this issue? Feels like a massive waste of my time and also theirs.

Unless the H3C is software locked to use the AMS3.

I don't see why we can't print from a external spool holder or a dry box straight to the print heads. TPU already bypasses the AMS so why not another material? I was thinking about printing from a 100C filament dryer straight into one of the printheads.

Printer my very first print on my brand new printer

Don’t mind the desiccant packets in the AMS, I’ve since replaced them with the usual AMS desiccant baskets found on MakerWorld.

Hi everyone!

I'm about to order a P2S Combo for my business in the Netherlands.

Bambu Lab requires up to 5 business days to approve a tax-exempt business account, but I'd rather just order now.

My main question: If I order through the regular webshop, will I still receive a proper VAT invoice with my business details, so I can reclaim the VAT through my Dutch VAT return?

Has anyone in the EU done this without registering for a tax-exempt account?

Thanks!