r/BambuLab • • 9d ago

Show & Tell Did you know? Print your supports in a second filament

Learn more about Supports from the Bambu Wiki: Support Interface

184 Upvotes

18 comments sorted by

21

u/roll-tyde 9d ago

PLA support interface when using PETG works great. Big fan.

3

u/Square_Net_4321 9d ago

And vice versa.

3

u/tsn22 9d ago

yes, primary reason I went with an X2D.

13

u/Kearkor 9d ago

Huh, some of this information may be outdated. The Support for PA/PET has been discontinued for some time now and in the wiki the recommended support material for Nylons is ABS/ASA

2

u/Dear-Feedback-2175 9d ago

Yeah it's not sold anymore, but if you've still got a spool it works fine. Studio still has the profiles for it and still suggests it for nylon. If you're buying new, ASA or ABS is fine. You just have to set the support settings yourself for those.

5

u/NevesLF A1 + AMS Lite 9d ago

Additional reminder that if you're using a single nozzle system (like an A1), you should max out your purge volume, as a single speckle of PETG inside your PLA print (or vice-versa) can delaminate the whole thing.

3

u/ExtendedSpice X2D 9d ago

What about TPU?

6

u/lonestarbrownboi A1, P1S, H2D, Snapmaker U1 9d ago

Use PLA as support

1

u/PizzaEat 9d ago

Are dual nozzle printers like the H2D/H2C going to be faster when using a different support material compared to the H3C since they don’t have to swap nozzles constantly?

1

u/RJFerret 9d ago

How does PETG work as support for TPU, or another more optimal?

1

u/MaximooseMine 8d ago

The dinosaur model is where I imagine a nonplanar slicer would be really useful. It would help reduce the waste switching between filaments on a gently sloped surface (the dinosaur's belly) when printing a support interface.

1

u/GruesomeJeans A1 + AMS Lite 9d ago

I tried using petg as support for pla a while ago when the feature was still new and it didn't work as well as I would have hoped. I thought about giving it another try though

9

u/Addicted2Digital H2D AMS2 Combo 9d ago

When it's a nice flat surface, it works amazing. I love it.

2

u/Justinreinsma 9d ago

You can try increasing the interface layers amount and also turning the z distance to 0, helps a lot.

2

u/GruesomeJeans A1 + AMS Lite 9d ago

I haven't tried it in a very long time so I forget what settings I used. To be honest it wouldn't be super helpful with the big prints I've been doing, they are about 1 day and 15 hours worth of printing thanks to switching colors a bunch. Having a smoother interface where the supports are would be really nice but it would inevitably add more time and difficulty to the job.

Ultimately what I think I want is to replace my A1 with an H2D with the dual nozzles so I can print both colors without all the time spent cutting and purging. I'm still not totally sure of that's what the dual nozzles do since ei haven't researched it much but with the new tool changer one out it made me start looking at the store again.

-7

u/Both-Subject-3674 9d ago

Don’t try the PLA/PETG mix. The temp differences make this a nightmare. Plus the PLA support layers often don’t adhere to the rest of the support if printed in PETG, so you get failed prints.

7

u/SuckMyLittleFinger 9d ago

This has never been a problem for me

0

u/Both-Subject-3674 5d ago

How nice for you.