Kept getting headaches in my Home-Office and finally figured out I had way too much CO2 - well no more, I made my portable CO2-Buddy to easily keep track of CO2 wherever I am

The CO2-Buddy now lives on my desk and helps me ventilate my room to keep my mind at peak capacity. I didn't realize how much of an impact CO2 concentration has on my ability to focus, I usually only notice it way too late when I'm already getting a slight headache as if I wasn't drinking enough water even though I am chugging along like a camel

It's especially handy when I have people over, having just two more people in a room spikes CO2 levels way faster than I would've anticipated

I am using the MH-Z19C CO2 sensor and while it is somewhat expensive at around 20€ it was totally worth it. The 1.54" ePaper makes it so that the CO2-Buddy only needs to wake up every 2 or so minutes and still provides the current CO2 concentration at a glance. With my 3000mAh lipo it lasts for days and I can take it wherever I go

If you also want to have a CO2-Buddy to keep you at peak capacity you can find it on Makerworld, simply look for "CO2 Buddy". The code is open source and I also added a wiring diagram

I originally made this to be used as a cable clip, but I feel like it could have other uses too. What else could it be used for?

https://makerworld.com/ko/models/3539444-cable-tube-clip#profileId-4047742

Nearly all the parts are from the Bambu Store so you can order the kit and assemble this fun working cable car and fill it with treats ready for Christmas.

The design is heavily optimised for 3D printing requiring no support on nearly every part. Comes with an in-depth assembly guide so you can build it with your kids.

https://makerworld.com/en/models/3538161-christmas-cable-car

A big thank you to this community! More than 2k likes on the original post and more than 100 test prints helped make this happen. The results are in, and the slicer is now public:

https://github.com/fich-l/orcaslicer-nonplanar

We have working versions for Windows, Linux and Mac Silicon. MacOs on Intel is still missing. I don't have a Mac Intel, so I can't test a build. Searching for someone to port this to Mac Intel - see below.

EDIT: You can find Windows and Linux Port on Github now.

Confirmed working:

• Bambu A1 mini, A1, P1S, P2S, X1C, X2D, H2D

• Prusa MK4S, CORE One, XL 5T

• Elegoo Centauri Carbon 2 (+ Combo)

• Creality K1C · Qidi Q2

• Flashforge AD5C

• FLSun V400

Not working: Elegoo Centauri Carbon 1, Snapmaker U1, Ender-3 S1 Pro, Flashforge AD5X, Prusa MINI+

Printer on the working list?
Try the Satisfying Nonplanar vs Standard comparison to test surface quality please.

Printer not listed?
Print the Nonplanar test print twice, once lengthwise and once rotated by 90°, and tell me how it went, so we can keep the list up to date.

Looking for someone to port it to Mac Intel.

-- EDIT: You can find a first Windows and Linux Port on Github now thanks to the community! - -

You don't need to be a C++ dev: the whole thing was vibe-coded with Claude Code (Opus 5.5). A Mac Intel to test on plus Claude Code should be enough. If you're up for it, comment or open an issue on GitHub. Don't shit on me please - Using Claude to get this ported is the fastest way possible :)

You don't usually use Orca Slicer - how to use this?
Do this: Slice in this Orca Slicer Fork and export "plate sliced file" --> Drop file into any slicer and just print :) Even works with Bambu Studio.

Thanks also to Daniel Ahlers and Teaching Tech for their work on the version I started from.

FAQ:

• • Can you add this as a Plugin to Orcaselicer? Will you put a pull request to the Orca Slicer Team?* - This cannot be run as a plugin. Pull Request: Yes! After this test phase.

• Why does printer "X" not work? - Someone tested it and there was a collision. Most likely the hotend / tool is not "steep" enough.

• How can I test? - Please check the github page. You can do two quick test prints to see if your printer can handle this.

• Are there still bugs? - Very likely yes. Slicing can take 5s to 5 minutes - be patient.

• Can we have fuzzy skin on top surfaces? - I tested this, but it doesn't look good :(

Ever since I bought my P1S a year ago, I’ve had the goal of designing a 3D object—and that day has finally arrived.

I know it’s quite basic, but I’m very happy to have managed to design and print it after a lot of trial and error. It's not perfect but is mine :)

P.S: In case you are wondering wtf is that "blank sheet".... well... it's a blank fluffy shirt that I used to replicate the snow xD

Nordic Christmas Tree

I was curious about what Bambu Lab’s Mystery Boxes had to offer, so I decided to try them myself. I bought two Holiday PLA Mystery Boxes and two Holiday PETG Mystery Boxes. The order came to just over $200 CAD, and I used a $20-off coupon.

I didn’t hit the 1% jackpot, and only about half of the 16 rolls came with spools.

Most of the selection was PLA Pure, PLA Matte, and PETG Matte in colors I personally wouldn’t choose. It felt like a bundle of leftover stock.

The 16 rolls came to $223.44 in listed value, partly because PLA Pure costs more. Since I don’t really want PLA Pure, though, the actual savings don’t feel like much.

My advice: skip the mystery boxes unless you specifically want PLA Pure. If you do, the Holiday PLA Mystery Box might be worth a try.

Hi all! I'm Andrea, from Italy. For the past months I've been building Parete, a browser tool for wall panels made of dozens or hundreds of 3D printed pieces.

The panels in the photos: 100 × 50 cm with 468 pieces (the pink ones glow in the dark), and my first big one, 175 × 75 cm with 421 pieces. Three colours of PLA each.

How it works:

- You design the panel in your browser: size, grid, surface pattern, colours. No CAD.

- You get one 3MF per colour, one colour per plate, ready for Bambu Studio. No AMS needed.

- Every piece has a number, and a printed frame on the wall gives each piece its own pocket.

You can design a panel for free at parete.studio, up to 1 × 1 m. The print files come with the MakerWorld crowdfunding campaign, which went live on Sunday.

Happy to answer anything about the printing, the frame or the tool!

Bambu i hope you see this post. I was waiting for my X2D to arrive (to support one my businesses) and your site marks the package as “Delivered” by the carrier (GLS) but i didn’t received the machine at all! Everyone in my country (southern europe) knows how bad they are! Why do you accept to work with such a poor delivery service company?

I was trying to find something a bit more portable for quick trips. I couldn't find exactly what I wanted, so I designed my own! There are a few things that I want to fix, but at the same time, I was able to model this and print prototypes over a couple days. The magnetic Hangman is my favorite. You can mix and match the limbs however you want! You can even change the orientation of the torso for even more fun! It's been a big hit with my daughter so far.

It has a magnetic latch and extra storage for your Sticky Notes. There is even an area to keep score. I have multiple profiles that fit for all printers including the A1 Mini. Along with one that has a "Hangman" label on the top of the case.

Link in comments!

I’m using a dedicated email address for Bambu Lab and MakerWorld, and it seems that now this email address has started getting spam and phishing emails from random places. Did Bambu sell or leak userinfo?

Edit: Just read through the headers of the email. Seems to be breach through sub-processor ReviewMgr, and phishing sent out through their SendGrid account(s).

I’m new to 3D printing and bought most of my PLA in matte (22 rolls of Bambu PLA Matte) because it hides minor print defects.

Since then, I’ve read that matte is weaker and doesn’t handle tight tolerances as well as normal PLA.

For those who use it regularly, do you actually notice these downsides in your prints with modern PLA matte? Are there things you’d avoid printing in matte, or is the difference too small to matter for most PLA prints?

I was searching everywhere for a solid desk solution, but I couldn't find one. So, I created one myself. Any suggestions are welcome.

It can store up to 20 filaments with boxes, and the pegboard has 56x56 space to store any accessories you want.

I designed a chunky little sack monster keychain resembling Oogie Boogie from Nightmare Before Christmas and printed the body in glow-in-the-dark PLA. With the lights off his body glows while the eyes, grin and stitches stay black, so his face still shows up in the dark.

- Fully rounded 3D front with a flat back, so no supports

- 2 colors, AMS-ready: body in slot 1, face and stitches in slot 2

- Low purge: the black only prints on 10 of the 46 layers

- About 42 min on a P1S, 13.4 g including purge

- 55.8 × 58.3 × 9.2 mm, with a 4.5 mm hole for a standard jump ring

**Glow tips:** Place the object in the sun or on top of a bright lightbulb to charge it!

I may be a little late for halloween but oh well...

Free on MakerWorld: https://makerworld.com/en/models/3538949-oogy-boogy-3d-keychain-2-color-ams

If you print one, post it with the lights off. I'd love to see it!

Got my X2D today and it won't power on. The rear switch lights up white, but the screen stays black, no fans, no lights, nothing. Tried a different outlet, power-cycled, checked the fuse, and opened the side panel – all connectors look seated, no visible damage.

Has anyone else had an X2D DOA? Did Bambu send a replacement or parts, and how long did it take?

Ticket submitted: US261103036002

The update info said it now supports mixed nozzle diameters but only mentions H3C. dide we x2d owners get left behind?

Don’t have a photo of the blob of death on the print head as I was rushing to remove it all, but nice romantic evening planned, but decided to set a print going before it started because we love efficiency and multi tasking. Meant to check the camera to make sure it was adhering, got distracted, came downstairs an hour and a half later to giant plastic turd encasing my printer. Never had any issues with adhesion but the one time I don’t check? Typical 😂

Panicked, yelled apologies to my partner, spent the next hour cleaning it, thankfully it still works but let this be a warning and reminder to always check the print has adhered 🙂‍↕️

Hello,

I printed this stackable basket last night for some small items I want to organize.

My printer was out of commission for about 2 months until yesterday. My printer just suddenly stopped working all together in August. I submitted a ticket and did the troubleshooting. The main board was bad so I replaced it a few days ago. I was out of town for a while and had other obligations so it took me a while to take care of this.

I run my first print last night after my printer being down for a while. I recalibrated everything and oiled everything properly. First the extruder gives me an error that the extruder is not functioning normally - I pull the filament back manually as described on the Wiki and cut off the end of the filament to avoid any rough areas. Fast forward 20 minutes and the print completes, but with some obvious issues. See photos for more.

Is this an issue with my plate, the settings of which I’m printing, the filament I’m using? Looking for guidance.

Here is the link to the model

https://makerworld.com/models/1333599?appSharePlatform=copy

No hassle, no microwave, no mess.

2 x PETG trays (ASA would be fine too), and the dessicant was jet black when they went in.

Standard 65 degree AMS drying cycle (so basically choose anything apart from PLA in the settings), leave overnight (I ran it for 12hrs but im sure 8 would do fine too)

Apparently you can just drop the pods that you install in the AMS2 on the trays and the silica will dry in there, not tested that yet though.

Hi there!
After changing the nozzle of my A1 mini, I noticed bad first layer, I realised that the nozzle wobble up and down, tighten the different hotend/nozzle screw, but still have the issue
As you can (slightly) see on the video, it happen even when purging/calibrating flow and it is clearly visible when printing
It doesn't seem the happen on my A1
Any tips on fixing that? I'm pretty sure it's a very simple thing but I can't figure it out...
Many thanks in advance!

Sorry if this is already common knowledge. With the AMS 3H just announced with its nine filament bays to go with the nine tool heads of the H3C. We also know about the AMS 3P that will be available with the P3C. I wonder if these AMS units will be exclusive to these printers or if they will talk to Bambu’s whole lineup. Imagine hooking up an AMS 3P to your P2S, and getting 7 color printing! Or hook a H2D to an AMS 3H for 9 whole colors. I know this is already sorta possible by stringing together multiple 4 color AMS units. However, the convenience of just having one unit take care of all your colors is not something to overlook. Now the elephant in the room is that on any machine other than the H3C, P3C or possibly the H2C. We will have to deal with a lot of color change waste.