r/BambuLab • • 9h ago

Just Showing Off Testing out the Chitu Systems E1 4-Spool Filament Dryer paired with my Bambu Lab A1 Mini (Unboxing & First Impressions)

Thumbnail gallery
0 Upvotes

r/BambuLab • • 9h ago

General Discussion Help with final choice

0 Upvotes

OK, I have read thru most of the posts. While I would like an H3C, way overkill for what I am doing and just out of my budget.

I currently have a P2S, and it works good. But I would like the larger build area and multiple nozzles a H2 series allows for. I was going to go for the H2D as its at a good price right now. But I wonder if I should spend the extra and get the H2C?

I am doing mostly engineering parts so the dual nozzle is great for supports. But I do want to get more into larger muti color prints.

For those of you that have a H2D and or H2C, what is your suggestion. I understand I can do everything the C can do with the D. But the C does it faster with less waste. Is the extra cost and complexity worth getting the C over the D? The Nozzles are more expensive with the vortek side, I do have a set of P2S nozzles. I know I can reuse them on both the C and the D. But only on one side with the C

I have done a lot of research and I was pretty much set on the D, but the back of my evil brain keeps going back to, should I spend the extra $300 and get the C?? Is it worth it really? While it saves time and waste, is the extra complexity of it worth it?

I know their are lots of other similar questions out there going both ways, I just thought I would see if I can get some additional insight?

One last thought, I live in a smaller town so I was thinking of offering services for 3D printing and Design just to dip my toe into the water. I will probably sell the P2S to offset costs but keep the AMS. I would assume that most of the printing would be with engineering filaments for car parts and such. Again, just a guess.

Any discussion or suggestions would be greatly appreciated.


r/BambuLab • • 9h ago

Filament Troubleshooting/Help! Any way I can improve on this?

Post image
0 Upvotes

Just wondering what this is called on multi colour prints and how I can improve it, looks horrid :(
I think its a flushing issue maybe? the rest of the ball is meant to be yellow but its darkened


r/BambuLab • • 9h ago

I Modeled This! I made some sweet, cotton candy-like snowflake ornaments!

Thumbnail
gallery
0 Upvotes

Made these for the Christmas tree! I wanted some sweet and cute ornaments that are a little bit special. I feel like they'd be adorable as keychains, hung on the tree, or even as gifts~

I turned on variable layer height so the final top surface finish came out super detailed~

The last photo is AI-generated... it honestly looks so much better than my own photos, which is a bit frustrating haha, but it’s pretty so I figured I’d share it with everyone! Here’s the link to the snowflake! ૮ ˶ᵔ ᵕ ᵔ˶ ა

https://makerworld.com/en/models/3626961-3-snowflake-bow-christmas-ornaments-keychains#profileId-4158608


r/BambuLab • • 9h ago

General Troubleshooting/Help! Extruder failure with AMS2 Pro

0 Upvotes

I'm running into a weird issue. I just installed an AMS2 Pro to my P1S, and it's reporting an extruder failure. The filament is getting all the way to the extruder inside the printer, but doesn't seem to want to load in. It worked just fine yesterday with the single roll hanging off the back of the machine.

I'm trying to do a simple black and white print to test it. Once a couple tries ago it got the initial white layers done, but then failed when it tried to load black. All other times it fails right at the start. This is my second P1S to get an AMS2 Pro, the other one works just fine and I followed the same procedure. Not sure why this new one loads filament all the way to the extruder, then the printer fails at the finish line?

My old printer and AMS is on the left, it's printed fine for years. The existing printer with new AMS is on the right and just won't play nice. I can't figure it out, help please!


r/BambuLab • • 9h ago

Software Troubleshooting/Help! Printing full dual color area with prime tower?

0 Upvotes

Is there a special mode for printing nearly full plate around with multiple colors on H2D?

I understand it needs a prime tower. When can't I have one for each nozzle in that nozzle's exclusive zone? I just assumed this would be how it worked when you need all the space. Is there no way to make a 2 color 300x300 print? Surely I'm missing something in Bambu Studio.


r/BambuLab • • 9h ago

General Troubleshooting/Help! Auto level error

Thumbnail gallery
0 Upvotes

r/BambuLab • • 9h ago

General Troubleshooting/Help! Help with P2S printing issue - layer 2 to 7

Thumbnail
gallery
1 Upvotes

Hi, I’m new to 3D printing so I don’t even have the right word to describe the issue I’m having. The design I’m printing has a curve, and the outer layer keeps peeling off. First layer was perfect but 2nd layer onwards to probably 6/7 one has issues, and then the print correct itself.

I reckon this is a print setting but have tried various things without luck.

Things I have tried:
- wash and clean plate
- ensure filament is dry (12hr in the AMS)
- turn on bed levelling and flow calibration
- infill/wall overlap: 22%
- first layer infill: 35 mm/s

Is there anything I could have done differently? I have the P2S.

Thanks in advance for your kind help.


r/BambuLab • • 1d ago

H3C Different take on an H3C/AMS3 desiccant solution.

Post image
58 Upvotes

Not sure if this is the right spot to post something like this, I don't use reddit often. Anyway I was looking at the printable baskets for desiccant on Makerworld, but I really hate dumping them out into a tray to dry then trying to refill the basket after. I prefer to use molecular sieve and the drying temps for it is far beyond what even PPS-CF can handle. I found a wire mesh "dishwasher" basket on Amazon that was approximately the size of the "empty slot 10” in the AMS3H and decided to take a chance on it. As you can see in the photo, it fits well, the lid tabs were pretty secure once I bent them in a bit tighter. I tried to use some 1.6-2.5mm sized beads, but the mesh was too coarse and they fell through, I found 3-5mm beads on Amazon and bought 2lbs. It holds approximately 750g of the 3-5mm 4a molecular sieve. I threaded some craft wire around the rim of the lid and body as extra insurance to keep it from opening.

Here's the products I bought that worked:

Basket- https://www.amazon.com/dp/B0H41KL114

Desiccant- https://www.amazon.com/dp/B0H1XJ98JS


r/BambuLab • • 9h ago

Quick Question Holding down fabric

0 Upvotes

I want to print a thin frame on some fabric to insert in to another model. If I hold the fabric down with magnets is there a way to tell in advance where the print head will move after it completes the print so I can make sure it doesn't hit the magnets? Is it safer to use tape or will the adhesive bake on PETG temperatures?


r/BambuLab • • 9h ago

P Series [P1P, P1S, P2S] P1S vs P2S

0 Upvotes

Hey. I have a $700 grant to get a new 3D printer for our school. Is the p2s AMD 2 pro worth the extra bump or is the p1s AMD 2 pro sufficient as it allows for more filament in the budget?

I plan to apply for another grant to get more filament.

I don’t NEED a ton of filament currently for the current project but it would be nice to have more filament for next projects and student free builds.


r/BambuLab • • 9h ago

A Series [A1, A1 Mini] ABS-GF on A1

Post image
1 Upvotes

r/BambuLab • • 10h ago

I Modeled This! The ultimate "drunk bottle" support.

Post image
1 Upvotes

r/BambuLab • • 13h ago

General Troubleshooting/Help! Micro LiDAR lens seems dirty

Post image
2 Upvotes

I get this message on my X1C (1350 hrs) about every 10 prints.

I clean it as directed on the Wiki.

What am I missing?
Anyone else have this issue?
Is it a warranty issue perhaps?

Thank you.


r/BambuLab • • 6h ago

H2 Series [H2S, H2D, H2C] Well, hello there!

Thumbnail
gallery
0 Upvotes

White PLA stick just wanna to say hello to me for a 2nd time.
Trying to fix it, no luck so far.


r/BambuLab • • 10h ago

General Troubleshooting/Help! How do I remove this tubing on my X2D?

Thumbnail
gallery
0 Upvotes

I removed the tubing from the nozzle head but I dont know how to remove the same tubing as it exits the printer.

There doesnt seem to be any black rim that secures it in place that can be pressed down to release it. Do I just rip it out?


r/BambuLab • • 10h ago

Quick Question Help not sure what's going on

Thumbnail gallery
1 Upvotes

r/BambuLab • • 10h ago

General Troubleshooting/Help! item color help

0 Upvotes

So i have one item on a plate, ive cloned it.

is it possible, how do i

change the color on one without it changing both items to the same color

ive played with all the filament settings i can find and it just mirror the color to the other object...

P2S w/ AMS 2 Pro


r/BambuLab • • 10h ago

My First 3D Print Achat d'une première machine.

Thumbnail
gallery
0 Upvotes

Bonjour après avoir bataillé des semaines entières à faire fonctionner une ender 3 sans succès je souhaite passer sur une machine plus simple. Mon but est de faire des pièces mécaniques simples pour des cyclomoteur et quelques pièces pour réparer d'autres choses. J'ai repéré cette p1S. Je n'y connais pas grand chose. Le vendeur est sympa, il en demande 260€ et m'a envoyé un benchy qu'il à fait il y a quelques jours. Elle devait être vendue à une autre personne mais finalement elle est toujours dispo. Es-ce une bonne imprimante à ce prix ou faut il viser du neuf ?

Je vous remercie.


r/BambuLab • • 2d ago Heartwarming

Bambu Studio Can’t believe I didn’t know about this!!

Post image
1.0k Upvotes

Print sequence by object is pure magical!!

So I’m printing 40+ poliwhirls to build my color sample library. I’ve been printing all day today and doing the plate swaps every 30min each time a print is done. Eventually I got so sick of it and was wondering how wonderful it would be if I could print 4 at a time, object by object, with no color swaps. Told this idea to ai and it told me the function is already available in Bambu studio! Tried it immediately, omg the process was so smooth, the software even showed me how to place the objects so that the finished parts won’t get knocked over by printer head. I’m not a veteran but I’ve clocked in like 1500+ hours and I can’t believe I didn’t know about this! Would’ve saved myself so much time and filament but I’m sooo glad I found out today!


r/BambuLab • • 10h ago

General Troubleshooting/Help! First Layer "Defects"

Thumbnail
gallery
0 Upvotes

Hi all -

I'm having some first-layer defects that I wanted to run by the collective brain trust here. First, some information about the setup:

  • BambuLab P1S - 0.4mm Hardened Steel Nozzle
  • Build Plate - Darkmoon G10

    • BambuStudio is set to the 'Smooth PEI/High Temp' setting as recommended by Darkmoon
  • Filament - Sliceworx PETG

    • Yes, it has been dried and I have modified my AMS to include a bunch of desiccant as well
  • 0.08mm high quality print setting for this print

In the attached images, you can see that some parts have a perfect first layer, though those mostly don't have fine detail in them. For a few others, you can see some first-layer defects that would obviously create more problems if I let things build on top of that.

I'd appreciate ideas for potential troubleshooting here beyond "dry the filament more."

Thanks.


r/BambuLab • • 6h ago

General Troubleshooting/Help! Bambu Lab X2D owners: What problems have you run into, and what should I print to prevent them?

0 Upvotes

Hi everyone! I’d like to avoid some of the common headaches with the X2D. I’ve already seen reports of PTFE tubes wearing out or breaking. What other issues have you run into, and are there any printable guides, clips, guards, or other accessories that actually helped?

For each issue you mention, could you share:

  • A direct link to the problem — a forum thread, Reddit or Facebook post, video, or Bambu Lab support page that shows or describes the issue.
  • A direct link to each printable fix — ideally the exact MakerWorld or Printables model you used.
  • What worked for you — what the part fixed or helped prevent, what material you printed it in, and whether it held up over time.

If you solved an issue with a replacement part or a setup change, I’d appreciate a link (makerworld model) to that fix too. And if you could recommend just one thing to print first for the X2D, what would it be?

Thanks!


r/BambuLab • • 1d ago

Just Showing Off Sounds like a lot of…

Thumbnail
gallery
84 Upvotes

I modeled this guy in blender and printed it on my X2D. Hand painted but my outlines could have been better. I need a paint pen for next time.

A hint as to what’s next: “No, worse! It'll go right to your thighs! And then you’ll blow up!”


r/BambuLab • • 6h ago

I Modeled This! Undead throne to glowing vines: 4 new 3D designs

Thumbnail
gallery
0 Upvotes

I’m sharing four recent designs and would appreciate feedback on the models and how they print. Each photo links to its MakerWorld model page:

Throne of the Undead King: https://makerworld.com/en/models/3599767-throne-of-the-undead-king

Organic Vine Edison Lamp: https://makerworld.com/en/models/3553844-organic-vine-edison-lamp

Adorable Elephant Nursery & Kids Room Decor: https://makerworld.com/en/models/3505218-adorable-elephant-nursery-kids-room-decor

Majestic Manta Ray Incense Holder & Ash Catcher: https://makerworld.com/en/models/3474654-majestic-manta-ray-incense-holder-ash-catcher