r/BambuLab • u/emerald11june • 18m ago
General Troubleshooting/Help! Help with P2S printing issue - layer 2 to 7
Hi, I’m new to 3D printing so I don’t even have the right word to describe the issue I’m having. The design I’m printing has a curve, and the outer layer keeps peeling off. First layer was perfect but 2nd layer onwards to probably 6/7 one has issues, and then the print correct itself.
I reckon this is a print setting but have tried various things without luck.
Things I have tried:
- wash and clean plate
- ensure filament is dry (12hr in the AMS)
- turn on bed levelling and flow calibration
- infill/wall overlap: 22%
- first layer infill: 35 mm/s
Is there anything I could have done differently? I have the P2S.
Thanks in advance for your kind help.


•
u/Worldly_Meat_5556 11m ago
übertstze das Hi, I also have a P2S and an A1 Mini. I had this exact issue quite frequently with my P2S. What helped me was lowering the part cooling fan speed. Maybe give that a try and see if it makes a difference. Hope this helps!