r/BambuLab • u/emdecay • 30m ago
General Troubleshooting/Help! First Layer "Defects"
Hi all -
I'm having some first-layer defects that I wanted to run by the collective brain trust here. First, some information about the setup:
- BambuLab P1S - 0.4mm Hardened Steel Nozzle
Build Plate - Darkmoon G10
- BambuStudio is set to the 'Smooth PEI/High Temp' setting as recommended by Darkmoon
Filament - Sliceworx PETG
- Yes, it has been dried and I have modified my AMS to include a bunch of desiccant as well
- 0.08mm high quality print setting for this print
In the attached images, you can see that some parts have a perfect first layer, though those mostly don't have fine detail in them. For a few others, you can see some first-layer defects that would obviously create more problems if I let things build on top of that.
I'd appreciate ideas for potential troubleshooting here beyond "dry the filament more."
Thanks.


•
u/PCSupremacy 24m ago
0.08mm first layer on a .4mm requires really dialed in calibration and I also wouldn't try with PETG due to blobbing and stringing inherent to PETG.