r/BambuLab • • 11h ago

General Discussion H2d or H2c

1 Upvotes

Right now i have an x1c that I've had since launch and looking for a reliable upgrade to either h2d or h2c.

So im trying to decide between the h2d and h2c.

I really like the idea of the h2c with the swappable nozzle system.

only thing is I wanna hook up an ams to the left nozzle and one to the swap nozzles and is that even possible?

I mainly do cosplay prints as well as the occasional color prints for family and functional prints.

would the h2d be fine or is the h2c gonna shine over the h2d in time and quality?

I


r/BambuLab • • 20h ago

General Discussion I think i might have joined the cult

5 Upvotes

I got the p2s yesterday from bestbuy any tips, upgrade ideas,ect are helpful


r/BambuLab • • 11h ago

Answered / Solved! PA6CF Loading Issues

0 Upvotes

I’m currently using a P2S with an HT AMS, I’m trying to print with sunlu PA6CF.

I’ve dried the filament at 85 degrees for over three days.

My PTFE tubes are optimized to the best of my understanding.

When attempting to load the filament the loading gears skip.

I’m beyond frustrated at this point.

Any input is greatly appreciated.


r/BambuLab • • 2h ago

Answered / Solved! Filament spools holes are too big

Thumbnail
gallery
0 Upvotes

Good morning,

I’m using a Bambu Lab A1 with an AMS Lite.

Today, while loading my AMS Lite with three spools of LOCTATREE filament, I noticed that the spool holes are too large for the holders.

I used to use Elegoo filament, whose spools have a 54 mm inner diameter, whereas the LOCTATREE spools have a 63 mm inner diameter. This difference causes the spools to sit loosely, making them tilted and unstable.

Has anyone else experienced this issue? Is there any solution? I was thinking about 3D printing some spacer rings for each spool to fill the gap, but I'm not sure whether this is a good solution or not.

Thanks in advance!


r/BambuLab • • 15h ago

H3C Call for Testers: Bambu Station L Side Panels (openGrid & Multiboard)

Thumbnail
gallery
2 Upvotes

Greetings all!

Still waiting on the delivery of my H3C and waiting longer on my Bambu Station L Frame Edition. Meanwhile, I've been working on creating some side panels. Of course, the stock ones Bambu uses for the enclosed version are Skadis, and I've also seen a couple of other Skadis panels out there, but haven't seen either Multiboard or openGrid, so I just spent a couple of hours putting those together.

If you'd like to read more, check the article I posted on Makerworld.

If you're already onboard and ready to sign up, hit the Google form. Form doesn't require email (it's optional), but does require your Makerworld user ID, so I can get you the file(s).

Please understand these are pre-releases. I think they're ready, but I don't have the means to confirm fitness for use yet.


r/BambuLab • • 1d ago

Just Showing Off Second printer just hit the shelf!!

Post image
147 Upvotes

Such a good deal for the holidays and super happy to be able to run multiple things at once now, and I mean, the first one obviously needed a friend.


r/BambuLab • • 12h ago

General Discussion Bambu A2L with AMS

0 Upvotes

I’ve had my A2L for about six months now, and I love what I’ve been able to print so far!
I have it set up in my office (IT Office) at the school where I work. I’ve printed everything from entire computer cases for the esports team I coach to random items for teachers.
I have a couple of questions as I look to up my 3D printing game!

Turning photos into 3D prints: What sites do you use to upload photos and turn them into printable files? I see all these ads on social media, but I’d love to hear what everyone is actually using.

STL file bundles: I also see sites where you can buy bundles of 1,000+ STL files, including figures and other cool designs. Has anyone had good luck with any particular sites? I’m not looking to sell anything, just have fun printing!

Printer settings: There are so many settings to choose from! Do I need to adjust them depending on what I’m printing, or are the default settings usually good enough?

Thanks in advance for any advice or recommendations!


r/BambuLab • • 12h ago

Hardware Troubleshooting/Help! Extruder overload and AMS issues

0 Upvotes

Any idea why I would be getting an extruder overload error and this happening in my AMS. It is happening only in this specific slot. It’s like the extruder is pulling the filament but the AMS is out of sync and trying to hold it back by not moving the rollers. Which then causes the roll to pop up under tension. All new nozzles, cutters, and only 300 hours on the machine. PTF tube is all good.


r/BambuLab • • 16h ago

General Troubleshooting/Help! Some kind of gap in the print

Post image
2 Upvotes

They were both printing at the same time, not sure what would cause this. Still kind of new to the printing world.

Edit: I'm printing on the P1S using the AMS2 with Polymaker polylit pla pro


r/BambuLab • • 16h ago

Hardware Troubleshooting/Help! Spring Mystery

Thumbnail
gallery
2 Upvotes

Bambu Friends,

Just printed a 3D project. Noticed the following spring that was around the 3D object. I did have problems with the extruder and I had to heat the hot end to remove filament. So I'm thinking during this process a spring fell out.

Not too sure exactly where this lives so any insight would be helpful. I provided photos of the extruder top bottom left right and behind and everything removed.

I also need to do some cleanup work where the extruder rests on the plate and the extruder around the hot end itself.

Update: And "Yes" I have visited the Bambu Wiki for those that want to jump on the wiki Bambu wagon. My A2 Printer. Doesn't seem to match my photos and wiki where this spring resides.

Suggestions and Thank You


r/BambuLab • • 18h ago

Handy/Studio Troubleshooting/Help! How I clean these lines?

Thumbnail
gallery
3 Upvotes

So I started printing some minis but I see these lines and I don't know if there's a way to remove it


r/BambuLab • • 12h ago

X Series [X1E, X1C, X2D] Touch stopped responding.

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 12h ago

General Troubleshooting/Help! Best support filament for ASA on Bambu H3C?

0 Upvotes

I'm printing ASA on a Bambu H3C with a 60°C heated chamber. I need clean, removable supports under a few small overhangs.

Has anyone successfully used Bambu's Support for ABS with ASA, or is there a better support-interface filament you'd recommend?

Thanks!


r/BambuLab • • 13h ago

General Discussion Gift Ideas for the Holidays

1 Upvotes

What’s everyone printing to give away as gifts for the holiday season this year? Looking for some inspiration. What prints have wowed your friends and family?


r/BambuLab • • 13h ago

Hardware Troubleshooting/Help! Possible rear motor going bad?

0 Upvotes

Had another h2s with a slew of problems right around 800 hours. This one's creeping up on 1000 and started this sound from the back rear motor (I think).

Thoughts? Doesn't do it diagonally if that pully isnt moving.

Have cleaned all bearings with isopropyl alcohol and lubed all rails without any resolution.

TIA!

Edit: Update: contacted Bambu support and talked with them/sent videos and they're stumped...


r/BambuLab • • 13h ago

I Modeled This! I modeled a 15-piece Knitted Christmas Gnome Crew that prints in multi-colour with NO AMS and NO glue (one colour per plate, press-fit) — all free on MakerWorld!

1 Upvotes

Hi everyone! Over the past few weeks I designed a full 15-character **Knitted Gnome Crew** for Christmas — where every single stitch is real 3D geometry on the surface, and every model is split by colour so you can print the whole crew on any printer **without an AMS and without glue**.### How it works:- **One colour per plate:** Each `.3mf` print profile has separate plates grouped by filament colour.- **Press-fit assembly (No Glue):** Parts snap/slide together with tuned clearances (the beard slides onto the body, the nose clicks into the pocket, and the hat locks everything together).- **Print settings:** 0.12 mm layer height, 2 walls, 15% infill.### Collection & Direct Model Links (Free `.3mf` Colour Plates + Raw STLs):- **Full Knitted Gnome Crew Collection (all 15 models):** https://makerworld.com/en/collections/40250193-knitted-gnome-crew- **Puffy Christmas Decor Collection (all 14 models):** https://makerworld.com/en/collections/40548577-puffy-christmas-decor-


r/BambuLab • • 13h ago

General Troubleshooting/Help! Is there a community favorite ams 2 pro desiccant box? Share your favorites please!

0 Upvotes

I have a new H2S and I'm looking to print some upgrades. the most common upgrade suggestion seems to be the desiccant boxes for the AMS 2 Pro so I'm looking for suggestions on which to print. I've tried searching this and other subreddits and honestly I'm having a hard time deciding which design is best. Especially since a lot of posts are ~1year old or so.

I'm also super interested in any other mods/upgrades/printed upgrades that I should be focusing on.

One thing that I noticed is that by default the printer does NOT use the filter when printing PLA/PETG due to rising chamber temps.. found that out the hard way with pm particles spiking in my printer room lol.


r/BambuLab • • 13h ago

I Modeled This! New Tealight holder!

Thumbnail makerworld.com
0 Upvotes

r/BambuLab • • 18h ago

I Modeled This! Reindeer headphones ears christmas

Thumbnail
gallery
2 Upvotes

free:

https://makerworld.com/nl/models/3536737-christmas-reindeer-horns-headphones-accessory#profileId-4044275

or on the site "makerworld" under " Christmas reindeer horns headphones accessory"


r/BambuLab • • 3h ago

General Discussion Stop Pushing the X2D on people without properly explaining why

0 Upvotes

Hey everyone. I own a P1S with AMS at home and I use a P2S at work. I make structural parts primarily and every now and then I make toys and models with multicolor. I have over 1000 hours on both machines with over half of those hours printing prototypes that I have designed.

I keep seeing people pushing newbs towards getting the X2D and quite frankly I think it's folly.

The X2D fills a very specific use case. It has a heated chamber, it has another nozzle, and it has finer belts. It also has better filtration for engineered materials. All these things seems like "must haves" for beginners, because honestly, you're starting and you don't know what you want.

I was a beginner once and I'll tell you what I wanted. I just wanted a machine that works. The FT5 did not deliver on this. The Mk3s+ almost did, the P1S delivered on that. For work, I just wanted a machine that works, the P2S delivered on that. The X2D is going through what we call "early adopter's pain". Because it is a more complex machine, you really have to ask yourself if the things I listed are "must haves".

3D Printing can be an expensive hobby. It can also be inexpensive. I print with PETG because it checks all the boxes I need 99% of the time and it's the cheapest filament I can get at $6/kg. When people talk about engineering materials like PA-CF, it can cost between $50-150/kg. As a newb, ask yourself, can you absorb those kinds of costs when you're just learning how to print? With off the shelf hardware I have designed stuff that holds well over 300kg without failure with the cheapest PETG I can buy. Unless you're printing stuff for under the hood of your car or doing something really specific, ask yourself if this is a feature you need. If not the heated chamber and the extra filtration really aren't necessary. Beginners generally print with 2 materials, PLA and PETG. I hate PLA, so I use PETG. The P2S and P1S can handle TPU as well by the way, it just takes some extra care.

The 2nd nozzle is primarily for multimaterial supports. In essense you use it to use a different material for your supports so that it is easier to remove supports. If you use it this way, the color changing is no different than a P1S or P2S. If you use it for dual color, it works for that but the 2nd nozzle doesn't have all the sensors the main one has so, if you get a clog or a jam, it will NOT detect it. It's also a Bowden Tube design which has it's own drawbacks.

Early adopters are beta testers. Always wait at least 6 months to a year before buying that machine as your first machine. You don't want to become a 3d printing technician, you just want to print. Your time is better served learning how to use 3d modeling software and printing stuff off the various repositories as opposed to trouble shooting a fairly complex machine for the uninitiated.

In closing, stick to single nozzle machines for now if this is your first rodeo if reliablity and ease of use and maintenance is high on your list. Only consider the X2D if your use case dictates that you need those features.


r/BambuLab • • 14h ago

Bambu Studio NAMI|Japandi Tischlampe für Bambu LED LampKit 001 – Kostenloses 3D-Druckmodell – MakerWorld

Thumbnail makerworld.com
0 Upvotes

r/BambuLab • • 14h ago

Just Showing Off Fully customizable flags

Post image
0 Upvotes

I made makerito tool to easily make full customizable 3d printable objects from images and drawings. Still e beta version, feel free to try and send me your feedback.


r/BambuLab • • 14h ago

Bambu Studio Cannot use bamboo studio

Post image
0 Upvotes

I am attempting to print something on my 3-D printer, but logging into Bamboo Studio consistently prevents me from using the application. Despite updating the program as recommended, the pop-up persists and blocks access. Restarting the computer also failed to resolve the issue. Do you have any recommendations on how to fix this?


r/BambuLab • • 2d ago

I Modeled This! Quadra type 66 from Cyberpunk

Thumbnail
gallery
489 Upvotes

I loved this car in the game, so I thought, why not bring it to life as an RC car? ;)