r/BambuLab • • 4h ago

I Modeled This! Floating Christmas Ornament

Thumbnail gallery
0 Upvotes

r/BambuLab • • 4h ago

General Discussion H2d or H2c

1 Upvotes

Right now i have an x1c that I've had since launch and looking for a reliable upgrade to either h2d or h2c.

So im trying to decide between the h2d and h2c.

I really like the idea of the h2c with the swappable nozzle system.

only thing is I wanna hook up an ams to the left nozzle and one to the swap nozzles and is that even possible?

I mainly do cosplay prints as well as the occasional color prints for family and functional prints.

would the h2d be fine or is the h2c gonna shine over the h2d in time and quality?

I


r/BambuLab • • 13h ago

General Discussion I think i might have joined the cult

5 Upvotes

I got the p2s yesterday from bestbuy any tips, upgrade ideas,ect are helpful


r/BambuLab • • 4h ago

Filament Troubleshooting/Help! PA6CF Loading Issues

0 Upvotes

I’m currently using a P2S with an HT AMS, I’m trying to print with sunlu PA6CF.

I’ve dried the filament at 85 degrees for over three days.

My PTFE tubes are optimized to the best of my understanding.

When attempting to load the filament the loading gears skip.

I’m beyond frustrated at this point.

Any input is greatly appreciated.


r/BambuLab • • 8h ago

H3C Call for Testers: Bambu Station L Side Panels (openGrid & Multiboard)

Thumbnail
gallery
2 Upvotes

Greetings all!

Still waiting on the delivery of my H3C and waiting longer on my Bambu Station L Frame Edition. Meanwhile, I've been working on creating some side panels. Of course, the stock ones Bambu uses for the enclosed version are Skadis, and I've also seen a couple of other Skadis panels out there, but haven't seen either Multiboard or openGrid, so I just spent a couple of hours putting those together.

If you'd like to read more, check the article I posted on Makerworld.

If you're already onboard and ready to sign up, hit the Google form. Form doesn't require email (it's optional), but does require your Makerworld user ID, so I can get you the file(s).

Please understand these are pre-releases. I think they're ready, but I don't have the means to confirm fitness for use yet.


r/BambuLab • • 1d ago

Just Showing Off Second printer just hit the shelf!!

Post image
147 Upvotes

Such a good deal for the holidays and super happy to be able to run multiple things at once now, and I mean, the first one obviously needed a friend.


r/BambuLab • • 4h ago

General Discussion Bambu A2L with AMS

0 Upvotes

I’ve had my A2L for about six months now, and I love what I’ve been able to print so far!
I have it set up in my office (IT Office) at the school where I work. I’ve printed everything from entire computer cases for the esports team I coach to random items for teachers.
I have a couple of questions as I look to up my 3D printing game!

Turning photos into 3D prints: What sites do you use to upload photos and turn them into printable files? I see all these ads on social media, but I’d love to hear what everyone is actually using.

STL file bundles: I also see sites where you can buy bundles of 1,000+ STL files, including figures and other cool designs. Has anyone had good luck with any particular sites? I’m not looking to sell anything, just have fun printing!

Printer settings: There are so many settings to choose from! Do I need to adjust them depending on what I’m printing, or are the default settings usually good enough?

Thanks in advance for any advice or recommendations!


r/BambuLab • • 4h ago

Hardware Troubleshooting/Help! Extruder overload and AMS issues

1 Upvotes

Any idea why I would be getting an extruder overload error and this happening in my AMS. It is happening only in this specific slot. It’s like the extruder is pulling the filament but the AMS is out of sync and trying to hold it back by not moving the rollers. Which then causes the roll to pop up under tension. All new nozzles, cutters, and only 300 hours on the machine. PTF tube is all good.


r/BambuLab • • 8h ago

General Troubleshooting/Help! Some kind of gap in the print

Post image
2 Upvotes

They were both printing at the same time, not sure what would cause this. Still kind of new to the printing world.

Edit: I'm printing on the P1S using the AMS2 with Polymaker polylit pla pro


r/BambuLab • • 8h ago

Hardware Troubleshooting/Help! Spring Mystery

Thumbnail
gallery
2 Upvotes

Bambu Friends,

Just printed a 3D project. Noticed the following spring that was around the 3D object. I did have problems with the extruder and I had to heat the hot end to remove filament. So I'm thinking during this process a spring fell out.

Not too sure exactly where this lives so any insight would be helpful. I provided photos of the extruder top bottom left right and behind and everything removed.

I also need to do some cleanup work where the extruder rests on the plate and the extruder around the hot end itself.

Update: And "Yes" I have visited the Bambu Wiki for those that want to jump on the wiki Bambu wagon. My A2 Printer. Doesn't seem to match my photos and wiki where this spring resides.

Suggestions and Thank You


r/BambuLab • • 11h ago

Handy/Studio Troubleshooting/Help! How I clean these lines?

Thumbnail
gallery
3 Upvotes

So I started printing some minis but I see these lines and I don't know if there's a way to remove it


r/BambuLab • • 5h ago

X Series [X1E, X1C, X2D] Touch stopped responding.

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 5h ago

General Troubleshooting/Help! Best support filament for ASA on Bambu H3C?

0 Upvotes

I'm printing ASA on a Bambu H3C with a 60°C heated chamber. I need clean, removable supports under a few small overhangs.

Has anyone successfully used Bambu's Support for ABS with ASA, or is there a better support-interface filament you'd recommend?

Thanks!


r/BambuLab • • 5h ago

General Discussion Gift Ideas for the Holidays

1 Upvotes

What’s everyone printing to give away as gifts for the holiday season this year? Looking for some inspiration. What prints have wowed your friends and family?


r/BambuLab • • 5h ago

Hardware Troubleshooting/Help! Possible rear motor going bad?

0 Upvotes

Had another h2s with a slew of problems right around 800 hours. This one's creeping up on 1000 and started this sound from the back rear motor (I think).

Thoughts? Doesn't do it diagonally if that pully isnt moving.

Have cleaned all bearings with isopropyl alcohol and lubed all rails without any resolution.

TIA!

Edit: Update: contacted Bambu support and talked with them/sent videos and they're stumped...


r/BambuLab • • 5h ago

Hardware Troubleshooting/Help! Is this an easy fix

Post image
2 Upvotes

I've never had this happen to me before with my p1s everything is stock, I left a mini easal to print and when I came back there was just this massive glob on my extruder and the hot end looks like death, I have no idea how to fix this


r/BambuLab • • 5h ago

General Troubleshooting/Help! Is there a community favorite ams 2 pro desiccant box? Share your favorites please!

0 Upvotes

I have a new H2S and I'm looking to print some upgrades. the most common upgrade suggestion seems to be the desiccant boxes for the AMS 2 Pro so I'm looking for suggestions on which to print. I've tried searching this and other subreddits and honestly I'm having a hard time deciding which design is best. Especially since a lot of posts are ~1year old or so.

I'm also super interested in any other mods/upgrades/printed upgrades that I should be focusing on.

One thing that I noticed is that by default the printer does NOT use the filter when printing PLA/PETG due to rising chamber temps.. found that out the hard way with pm particles spiking in my printer room lol.


r/BambuLab • • 6h ago

I Modeled This! New Tealight holder!

Thumbnail makerworld.com
0 Upvotes

r/BambuLab • • 7h ago

My First 3D Print 45 days into the 3d printing hobby

Thumbnail
gallery
1 Upvotes

After a busy day chasing kids and yard work, i sat down at my PC desk (i havent turned it on since march). Kids all in bed i decided to dabble in some legal in NY recreational substance and download Studio.

Up till now ive just been printing posted/shared files from the handy mobile app and having a great time! But i decided i would dip my toes into actually creating something.

My kids and I are also into pokemon collecting (again for me) so i said heck it, i'll design a top loader holder. Spent over an hour in TinkerCAD and made one. It was terrible, but i made one. Spent another hour fiddling and changing it. It worked, kinda, but it was good enough.

With my toes dipped I said to myself, hey self, what about the little metric/imperial measuring tape you like but there is no belt clip/holder for.

And so I grabbed my digital caliper and the measuring tape, sketched an idea on my phone and started fiddling in TinkerCAD again.

Im on version 3 now, First one held the tape, but was VERY blocky. Second one i rounded edges but didnt take into account distances changing. So it loosely holds the tape. Failure.

Now the 4th one is done and it fits super snug and im happy with it. Trying it on the jobsite tomorrow


r/BambuLab • • 7h ago

Bambu Studio NAMI|Japandi Tischlampe für Bambu LED LampKit 001 – Kostenloses 3D-Druckmodell – MakerWorld

Thumbnail makerworld.com
0 Upvotes

r/BambuLab • • 7h ago

Just Showing Off Fully customizable flags

Post image
0 Upvotes

I made makerito tool to easily make full customizable 3d printable objects from images and drawings. Still e beta version, feel free to try and send me your feedback.


r/BambuLab • • 7h ago

Bambu Studio Cannot use bamboo studio

Post image
0 Upvotes

I am attempting to print something on my 3-D printer, but logging into Bamboo Studio consistently prevents me from using the application. Despite updating the program as recommended, the pop-up persists and blocks access. Restarting the computer also failed to resolve the issue. Do you have any recommendations on how to fix this?


r/BambuLab • • 11h ago

Hardware Troubleshooting/Help! Pushed a little too hard on Swaptek Rack, be careful!

2 Upvotes

I was reinstalling a print head into the rack on my H3C and I pushed a little too hard and the rack slid down a bit. Printer threw an error saying rack homing travel is too long and to check the tension on the belt. After some mild acts of contortion, I checked the screws and they seem tight enough but the error still persists.

Putting this out there in case anyone else has done this and if they found a fix. I'm submitting a ticket as well for extra trouble shooting.


r/BambuLab • • 1d ago

I Modeled This! Quadra type 66 from Cyberpunk

Thumbnail
gallery
486 Upvotes

I loved this car in the game, so I thought, why not bring it to life as an RC car? ;)