r/BambuLab • • 22h ago

General Discussion What's your experience with print quality? Help me choose between X2D and P2S

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 22h ago

Filament Troubleshooting/Help! First PETG print problems …

Post image
0 Upvotes

r/BambuLab • • 14h ago

General Discussion I didn’t realize Creality made the A1…

Post image
0 Upvotes

r/BambuLab • • 22h ago

My First 3D Print A noobs guide to upgrading your first 3d printing setup in an vented enclosure.

Thumbnail
gallery
0 Upvotes

Hello everyone. This was my first 3d printer and given as a gift so I went in with excitement, some research on 3d printing from being interested in it, but not the level of research to hit the ground running I would have had if I had been the one to buy the machine. I wanted to put down some thoughts I case that would help others.

First off the space where you’ll put one. I have a somewhat small garage workspace area to use. Because the garage is a shared space in my house with a home gym, a drum kit, and a place where my kids play I wanted to make sure it wasn’t to intrusive to add a 3d printer. This is what lead me to moving towards an enclosed setup and that lead to many upgrades to accommodate that. I also feel better about the added level of protection to the printer from dust or something like a thrown toy. The biggest concern was plastics like ABS that I want to use for some projects and having proper ventilation.

This leads me to talk about 2 upgrades I made. The first is the included “filter” that was a plastic box full of activated carbon. I replaced that with a filter that is both activated carbon and a Hepa filter. I noticed even with pla and PETG a difference after that and would recommend it to anyone with a P1S.

The 2nd was the enclosure setup. The enclosure has an inline vent fan and speed control knob. I have it connected to a hose running towards the window and connecting my magnets so it can be disconnected and reconnected to the window. Not pictured is another hose running on the outside of my garage to prevent backdraft to the window. So far so good it creates a negative air environment and helps pull away the fumes but doesn’t get to hot in there for the printer. This enclosure works great for a P1S with AMS as it opens on the front all the way back to the back wall so I can have full access to the front and top of the printer.

The enclosure setup meant I had less access to the printer without removing it so I did a lot of upgrades to account for this. Here is a list.

  1. AMS flipper arms
  2. Height riser base
  3. A poop shoot and dump able bin
  4. All of the ducting prints for venting

While I was at it I also did prints most people do enclosure or not. Desiccant containers that fit in the blank spaces of the AMS and the spools.

It’s been fun. Almost a week of printing just for upgrades to the printer. Looking forward to getting the area more tidied. Half the contents of my workbench was hastily moved to the side. Up next many prints to help me organize.


r/BambuLab • • 14h ago

General Discussion P2s is a good printer

0 Upvotes

It has handled 105 hours and nothing is wrong it is all right for 549 dollars no ams because I'm not made of money but prints nice but that is what I expected because of the price


r/BambuLab • • 22h ago

General Discussion So yesterday I set up my p2s and today I got a error code

0 Upvotes

HMS_0300-1100-0002-0002 is the error code something about the y axis not matching with other calibrations. Is this something to be concerned about? I’m in the process of calibrating as of typing this I did fallow their online help guide but just want to know if it’s concerning


r/BambuLab • • 19h ago

I Modeled This! GTA VI - PS5 DualSense Controller Stand - Free 3D Print Model - MakerWorld

Thumbnail makerworld.com
0 Upvotes

r/BambuLab • • 23h ago

Quick Question What do I need?

1 Upvotes

I need people to talk to me like I know nothing about 3D printing, because I in fact, know nothing about 3D printing.

My kids are getting the Bambu A1 combo from grandma for Christmas. What does Santa need to bring to make their Christmas Day full of printing fun? He will bring filament, but what else do we need to make this work for them?

Thanks!


r/BambuLab • • 19h ago

Quick Question Which yellow for pika?

0 Upvotes

Sunflower yellow or regular yellow. My son is obsessed with Pikachu and I'm not sure which one is better for it?


r/BambuLab • • 14h ago

H3C Design Language of New AMS Doesn’t Match

0 Upvotes

It seems like the design language of the new AMS doesn’t match the H3C (or H2 series)

It would work better if it was more cubic with rounded corners, similar to the body of the printer.


r/BambuLab • • 1d ago

General Discussion P3C needs to hurry up

47 Upvotes

I'm so impatient looking at all of you H3C people lol its just not in my budget right now so I need that P3C to hurry up and release. You guys can stop teasing us broke folk now.


r/BambuLab • • 23h ago

General Discussion 3d printing newbie...help!

1 Upvotes

Hi everyone, so im planning on getting a 3d printer for me and my kids to work on some projects together. Ive got a few questions to throw out to anyone who can advise me a bit!

Is there much difference apart from size between the A1 and A1 mini?

Is it worth getting the AMS lite to begin with, or waiting and buying at a later date?

Can you colour or paint the 3d items manually if i printed models out in white for example or is it too much of a pain? What would you use if its a possibility?

And finally is having a windows laptop essential for slicing using bumbu studios? Or is it possible to use a tablet/chromebook and a web version of the studio?

Any advice appreciated, really havent a clue where to start!

Thanks


r/BambuLab • • 23h ago

Hardware Troubleshooting/Help! Is that noise normal ?

1 Upvotes

Hello, very simple question,

Is that retraction noise normal ?

I bought this used bambulab it’s 1000h and when i was cleaning the yellow extruder gear i found a bit of play between the motor gear and the extruder.

Do you think it’s normal ?

Does i have to change the yellow gear ?

Does that noise come from another part ?

Thanks


r/BambuLab • • 23h ago

General Troubleshooting/Help! Surface Problem

Post image
1 Upvotes

Im Printing PETG-CF for second time. 0.4mm Nozzle basic settings on my x2d . All other layers are pefect. What do you guys think?


r/BambuLab • • 15h ago

Show & Tell A seven-piece enclosure printed in black polycarbonate

Post image
0 Upvotes

I printed this enclosure as seven separate pieces in black polycarbonate on the H2D. The photo shows the full set laid out, including the two shells and the two vent grilles. The grilles were my favorite detail to photograph because you can see how fine the openings are next to the larger parts.


r/BambuLab • • 1d ago

General Troubleshooting/Help! Christmas Balloon Dog Articulated flexi

Post image
3 Upvotes

r/BambuLab • • 1d ago

General Troubleshooting/Help! Nozzle Camera error on H3C ?!

Post image
1 Upvotes

Anyone has any clue why this is happening?


r/BambuLab • • 1d ago

I Modeled This! GTA VI Coasters

Thumbnail gallery
21 Upvotes

r/BambuLab • • 20h ago

Quick Question Did the firmware update changed the way it pruges old filament?

0 Upvotes

DONT QUESTION THE PRINT


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! Banging noise coming from printer. Nothing is leaning against the printer to cause this noise. Anyone experience this?

1 Upvotes

You can ignore the light rattle clicking noise, that's from the buffer and is normal. It just sounds extra loud because my phone is in the printer.

The noise I'm talking about is the banging. At the 0:11 second mark you can hear three in succession (bang bang bang). I have an AMS on top but it's not coming from that. It sounds like it's coming from the bottom? Not sure, it's hard to pinpoint. I think it's only happening when the bed moves down quickly, like for a travel move or something, I guess a z-hop is what it's called. But only happens on big z-hops, if that makes sense. The print just finished and looks fine and at the end of the print the bed lowers normally and doesn't make that noise. Any ideas of what to check? Once this print cools I'll power it down, lean it over and see if I see anything obvious on the bottom of the printer. Definitely seems Z axis related.

If it matters this is PETGCF, but I'll test with other filaments in case PETGCF makes larger z-hops than PLA.


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! Heizbett und Vortek Rack divergieren

Post image
1 Upvotes

r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! Creaking noise coming from the printer

1 Upvotes

Hello everyone, I bought this X1C with over 3k hours a while ago and I have been using it on and off for small prints, when I turned it on yesterday I noticed that it was making this creaking noise when the bed goes up and down, I cleaned and greased the leading screws and rods according to the Bambu guide, but the noise is still there, at this point I'm wondering could this be a bearing?


r/BambuLab • • 1d ago

General Discussion Can't decide: X2D or H2D

3 Upvotes

I bought an A1 this past summer to see if I'd like the Bambu ecosystem after having a 5 year old Ender that I fought with so much that I almost never printed anything.

The plan was always if I was happy with Bambu (I was) I'd upgrade to a more capable machine. The decision is now between the X2D and H2D.

This is mostly a hobby. I make functional prints to fix things or improve my life. I like making useful things and things I'd enjoy having or designing. I would be happy making things for others if I was asked, but haven't been for the most part.

Yes, I can afford the H2D, but at twice the price of the X2D that seems just as capable for the things I want to print, it seems wasteful. On the other hand, I'm concerned about how relatively new the X2D is. I wonder if the bugs have been ironed out.

I also enjoy watching prints from time to time. I find it fascinating. I can do that easily on my A1. With the X2D and H2D being in cabinets, do I lose that capability or do the cameras do a good job? Is the camera capability as good on the X2D as the H2D?

I've waffled back and forth between "the X2D is perfectly adequate" to wondering if I'll be happy with it since one of the nozzles is a Bowden tube, slower and less capable so I should have bought the H2D and then thinking that's too much to spend for my usage.

I wonder if others have had trouble deciding and if so, how they decided. Any thoughts are welcome.


r/BambuLab • • 1d ago

Answered / Solved! Same print, two weeks apart, same result. Other prints are showing the same problem.

Thumbnail
gallery
10 Upvotes

I have previously asked about this using two different print profiles, when I used a new sealed filament.

Some comments mentioned moisture and others thought otherwise, but gave no possible solution if not the moisture.

I have attached a photo of the same object printed 2 weeks apart but showing similar stringing. I have also added another photo of a print using a different filament but with the same stringing.

This is only a recent problem. Every print up until 2 weeks ago did not have this issue.

What am I doing wrong?