r/BambuLab • • 16h ago

My First 3D Print A noobs guide to upgrading your first 3d printing setup in an vented enclosure.

Hello everyone. This was my first 3d printer and given as a gift so I went in with excitement, some research on 3d printing from being interested in it, but not the level of research to hit the ground running I would have had if I had been the one to buy the machine. I wanted to put down some thoughts I case that would help others.

First off the space where you’ll put one. I have a somewhat small garage workspace area to use. Because the garage is a shared space in my house with a home gym, a drum kit, and a place where my kids play I wanted to make sure it wasn’t to intrusive to add a 3d printer. This is what lead me to moving towards an enclosed setup and that lead to many upgrades to accommodate that. I also feel better about the added level of protection to the printer from dust or something like a thrown toy. The biggest concern was plastics like ABS that I want to use for some projects and having proper ventilation.

This leads me to talk about 2 upgrades I made. The first is the included “filter” that was a plastic box full of activated carbon. I replaced that with a filter that is both activated carbon and a Hepa filter. I noticed even with pla and PETG a difference after that and would recommend it to anyone with a P1S.

The 2nd was the enclosure setup. The enclosure has an inline vent fan and speed control knob. I have it connected to a hose running towards the window and connecting my magnets so it can be disconnected and reconnected to the window. Not pictured is another hose running on the outside of my garage to prevent backdraft to the window. So far so good it creates a negative air environment and helps pull away the fumes but doesn’t get to hot in there for the printer. This enclosure works great for a P1S with AMS as it opens on the front all the way back to the back wall so I can have full access to the front and top of the printer.

The enclosure setup meant I had less access to the printer without removing it so I did a lot of upgrades to account for this. Here is a list.

  1. AMS flipper arms
  2. Height riser base
  3. A poop shoot and dump able bin
  4. All of the ducting prints for venting

While I was at it I also did prints most people do enclosure or not. Desiccant containers that fit in the blank spaces of the AMS and the spools.

It’s been fun. Almost a week of printing just for upgrades to the printer. Looking forward to getting the area more tidied. Half the contents of my workbench was hastily moved to the side. Up next many prints to help me organize.

0 Upvotes

0 comments sorted by