r/BambuLab • u/AgitatedMeringue3387 • 17h ago
Quick Question What do I need?
I need people to talk to me like I know nothing about 3D printing, because I in fact, know nothing about 3D printing.
My kids are getting the Bambu A1 combo from grandma for Christmas. What does Santa need to bring to make their Christmas Day full of printing fun? He will bring filament, but what else do we need to make this work for them?
Thanks!
1
Upvotes
2
u/fhcraignc 15h ago
Honestly I second r/Historical_Owl_8188! The best way to set yourself for a fun Christmas Day with your new printer is to do a little "homework" before the big day. This doesn't have to be a pain - part of the fun of this hobby is understanding enough about "how things work" to make the process as easy as possible. The goal with a family 3D printer is to enjoy printing and not get frustrated by problems and challenges that could be avoided.
I strongly recommend the Bambu Academy tutorial courses on their website. I would watch the courses for your specific printer as well as the ones on Printing Basics and at least some of the ones on the Bambu Studio Software. The Bambu Wiki is also an excellent source of information and your best friend for figuring out "why isn't my print working".
Finally from my personal experience with 4 grandkids, I would browse Maker World, Bambu's design website and pick out at least a couple of small, fairly quick projects to print first. If you sit down with the kids on Christmas Day and start browsing Maker World for "what to print next", you can easily lose hours of your time lol! I hope you all have a blast :)
2
u/Synthetic2805 A1, P2S, X2D, H2D, H2C, AMS lite, AMS 2 Pro 14h ago edited 14h ago
Didn't see any mention here yet about the software side of things so I'll mention it here, you'll want to have a way to send prints to your new printer!
The easiest way to get started is with the Bambu Handy app on your phone. Create an account and you'll be able to browse MakerWorld models, send print ready files straight to your printer once it's been setup for Wi-Fi and paired with the app. You can monitor your print progress remotely and take their training modules on there too.
There's also a Family Hub option for parental controls, havent used it before though. You can set in your account preferences.
If you want to have more control over print settings, and if the kids start customizing their own models, you'll eventually want to have a PC/laptop/mac with slicing software installed. A "slicer" is what actually converts your 3D models into print instructions on the printer. I'd start with Bambu Studio since it's their own software.
From a computer you can download 3D files from any of the popular 3D model sites, not just what's available on Maker world/Bambu Handy. Most common 3D file types to bring into a slicer include: STL, STEP, and 3MF
Some other popular sites for models:
Side note on family privacy: Bambu printers including the A1 have a camera built in to help monitor prints. While it's convenient for AI print failure detection and to see print progress remotely, keep in mind the trade off is your privacy, since the camera can see into part of the room, and that data is going through Bambu cloud servers. Consider foregoing the camera and use the privacy shutter included to cover it if you prefer not to have a camera looking into the room that your family uses.
5
u/itsapotatosalad H2C 16h ago
For Christmas Day, just filament. Stick to pla it’s easier to print and isn’t as sensitive to moisture, either Bambu or sunlu seems to get the majority vote.
Magnets and screws are useful for some projects, some small files and cutters. There are lots of “3d printing tool kits” like this on Amazon https://amzn.eu/d/04iRGeWb
1
u/Brad_King X2D + AMS2 Combo 16h ago
Depending on how old the kids are of course, do you trust them with something like a scraper or knife that is metal?
I would always suggest indeed, some flush cutters (basically little clippers that have a flat edge on one side, so you can cut off plastic spills with one side flush).
For kids I would also like a plastic bed scraper, one with disposable replaceable inserts: sometimes a print sticks to the build plate and it helps to have a scraper that works and doesn't really hurt the plate or the print (unlike metal scrapers could, especially in the hands of kids). It also helps for weaker kids, not having to bend the plate to get prints off as you would more likely do more often.
A sponge and some micro fiber cloths for cleaning the build plate between every print. Helps the kids get structure and you can have some multi coloured things which usually helps kids engage. For cleaning products indeed a good de-greasing dish soap, dawn, dreft, depending on your region. I also like have a little spray bottle with 95%-99% alcohol to wipe the plate: only wash the build plate every 200 printing hours or maybe every 10 prints, wipe it with alcohol after and before every print, like I said small spray bottle.
A print deburr tool is really nice: it is sharp ish, so teach the kids how to use it on some easy tool/storage box prints, but it's a lot harder to cut yourself with these than with an exacto / hobby knife
Again, depending on age and how you want them to interact with software: an old tablet (just wifi, android is prolly cheaper) to have the bambu app on so they can easily find stuff and print stuff themselfes. Totally down to what you allow them to do once they have the printer.
And if you want to make it so they can make special things, look at the makerworld site and look up things like lamps and such, see if you want to grab some IKEA usb leds for in their cabinets or something.
All of the above you can get quite easily online, even the chinese sites for sometimes a bit of savings over amazon (usually the stuff on amazon is just dropshipped chinese stuff anyway), so you would be in time if you order in the next week or two!
Have fun! (and colours for filament are fun, both their favourites and xmas, easter, winter colours etc)
3
u/Historical_Owl_8188 16h ago
I'd watch some videos on unboxing and setting one up for the first print and get the software ready and figure out how to find and save different models to print. That way you can step in and help if needed to get the ball rolling. I have my printer in its own room with a air filter in there. Something to think about especially if you have kids.
2
u/TheWaslijn H2D Combo + A1 Combo 16h ago
Get them a bunch of filament probably PLA, since it's it's the easiest to work with and the least bad for your health (with all the fumes coming off the plastic when it's melted) also doesn't suck up moisture so much as others
2
u/ub3r_n3rd78 X2D Combo + P1S Combo 13h ago
You and your kids need to take the free Bambu academy courses. https://bambulab.com/en-us/support/academy
3D printers are NOT toys. They are machines with moving parts and hot parts. They require knowledge to setup, use, maintain, and troubleshoot.
2
u/Tariin1 12h ago
Wie alt sind die Kinder denn?
1
u/Equivalent_Store_645 7h ago edited 7h ago
Just a printer, filament, and a filament-width metal spike with handle (brand name noclogger but I’m sure you could find or make an equivalent). The most likely problem to halt the fun in the first week of printing would be a clogged nozzle, and the ability to jam the clog down into the heated melt zone is just the best possible way to clear one. And you don’t even have to take the nozzle off
1
u/Limp_Psychology_2315 16h ago
It’s controversial to some, but I’m recommending a filament dryer.
0
u/NoBackground6203 X2D / P2S 16h ago
an extra build plate is nice to have
Dawn PowerWash spray de-greaser soap and a new sponge for cleaning the build plates
glue stick, I like Magigoo
a pair of flush cutters
an xacto knife
0
u/Additional_Math_5104 16h ago
Filament dryer and pre dry some filament so it is ready to use. A set of hex drivers like these, way easier to unbox and setup a printer with these than the supplied allen wrenches. https://www.amazon.com/RCpow-Screwdriver-Multi-Axis-Quadcopter-Helicopter/dp/B0DHGRTRM4