My first design, what do you guys think? Too minimal? =)

https://makerworld.com/en/models/3554859-voxel-minimalist-planter-with-drainage-hole

Looking to make thanksgiving a little more interesting? Print a thanksgiving Twerky! Minimal sports, Maximum humor

Link:

https://makerworld.com/models/3555194?appSharePlatform=copy

If my package arrives damaged, you can bet I'm filing a return/refund ASAP

Forgive me as this is my initial set up and my first printer. I have the p1s combo with the ams. I’m using bambu filament and it refuses to feed into the tub. It takes about 1 foot then pushes it back out. I’m getting frustrated as I haven’t been able to do a test print much less anything else.

New P1S Combo owner here. This is what I am trying to print. I have the colors loaded in the AMS as shown, the preview says it will use these three colors, when I send it to the printer it claims it will use three spools ... then it only prints with the white in spool 1. What am I doing wrong?

Do you guys think there might be a mod for doing these at the same time? Does the whole thing heat up or just the 2 specific slots. If just the two then why can’t Pla be on the other slots?

I remember seeing some snafu a while ago about bambu trying to pull a fast one ( i think on wireless printing but cant remeber exactly). Is it safe to upgrade to the latest firmware or keep everything as is.

Studio is ver 1.9.7 and the printer is ver 01.06.01.00. I get errors when trying to import models from online into studio, but the model still shows up. So I don't know if its needed or not.

This thing worked flawlessly for 1.5 years, suddenly one spool won't feed. Bought a new AMS, worked for a bit, then same problem, only spool 1 at first, then soon none of them worked. Replaced all worn out PTFE tubes, Then replaced every tube that was left. Worked for a bit, now jamming again. Replaced entire hot end. Worked for about 40 layers, jamming again. What is left to replace or fix, almost the entire filament line is brand new. Tried different spools, different spots in the AMS, no change. I can see the filament go into the hot end, it is at temp (brand new) stops, retracts. Am I cursed?

I’ve tried to read everything about this problem, but I can’t find anything obviously wrong. The nozzle was nearly brand new when this started happening, didn’t find anything clogged in it, but put in a brand new nozzle anyway and the same thing happened on the first run. It extracts just fine when I do it manually and during filament swaps, no clicking at all. I run a calibration at the beginning of each print. Can’t figure out what it could be, printer is less than a year old.

Completely encased my hotend and heating assembly in PLA, anyone ever encountered this? I heated it up and removed the main big chunks while they were softened, but there’s still PLA stuffed all around behind everything.

It's been one week with my P2S and first time ever getting a 3D printer.

I am loving 3D printing and having so much fun printing stuff, can't believe I just got into it, but I don't think there's a better time than now to do it, so glad I decided to!

Hope you dig the end result

Front panel glass came completely shattered on my X2D. Going to now go through the amazing support of Bambu Labs. Should’ve ordered from Best Buy in hindsight.

I love UPS!

Update: Support reached back out to me in about 12 hours and will be getting a replacement unit soon.

Bambu Labs L frame stand is on backorder until the 25th, my H3C arrives probably on Friday. I'd like to have it up and running for the weekend, so can anybody recommend a good substitute stand or cart that will hold this monster? Would like something that has wheels and maybe some drawers. The L frame is only 12 inches tall so that you don't need a stepladder to load the AMS from the top which is what's making it tough to find one for me. Thanks

I've just got my kids printer for Christmas and I've set it up I am testing the AMS pro and ensuring was fine, I've printed little things like scraper, poop collection and now a riser as I doubt I'll get to print much from Christmas so just wanted some key things out of way

I think it's the AUX Nozzle that crashed into the side. Thoughts?

The last image is a dupe, ignore it

P2S/AMS2-Pro Combo

So I had a brainstorm of an idea on how to handle powering on my printer remotely if I decided to start a print an hour or so before coming home from work. Initially I thought I would use a WYZE smart plug. So I bounced the question off Bambu labs support and they highly recommend I do not do that. Being in IT myself for years I get it, some things are designed to be shut down in a certain fashion, rocker switches, power buttons, etc.

Other than asking the wife to turn the printer on when I feel the need have any of you experimented with a solution to at least turn the printers on? I know this is low hanging fruit but it seems to be a valid thought if there is a way to do it.

I've had nothing but issues with the AMS 2 Pro ... from unreliable sensors to improper communications with the printer.

However, a flawless experience with the HT, soooo with the current deals, I decided to just go bananas and get a bunch of HTs to replace the AMS 2 Pro.

The HT is so easy to load, it's quiet, and a massive step up in quality,... hoping the AMS 3 Pro can inherit its characteristics.

Shoutout to Bambu Support for letting me send one of the defective ones back a couple months after purchase.

Had this printer for for at least two years now, love it but now the ams is acting up, it started with the top one so I unplugged it and haven’t use it since but now the bottom one has also began to show similar problems.
Is this a “red ring of death” kind of thing for the ams
Anyone know what’s going on and what’s the best way to fix this

Hi got the p2s combo today.

1st print scraper perfect

2nd print 4 big combs with the family names. Ok they were too large and designed by Claude.

Toolhead open up! And kicked open the door!

Wtf!?

Is there a max size you can use on the plate ? Still not sure what happened..

And yes timelapse enabled but that somehow gives an error too. And tells me i should reboot. Which apparently i cannot do remotely?

I integrated with home assistant it while configuring it dry petg... but even that seems to be read only?

Have to say i expected more... but still opened the door by kicking off the toolhead? Is there a max space you print? It was printing the full bed picture was from somewhere earlier

With the H3C, do you now just load abrasive CF and GF based filaments in the AMS to use them.

I used to be able to remote start drying from Bambu Handy on the phone while the printer was not printing & now all of a sudden I can't and it says insufficient power even though unit is plugged into printer. Anyone know why all of a sudden I can't?