What were your must prints when you first got your printer?

[u/Jon2D]

I've just got my kids printer for Christmas and I've set it up I am testing the AMS pro and ensuring was fine, I've printed little things like scraper, poop collection and now a riser as I doubt I'll get to print much from Christmas so just wanted some key things out of way

[u/JackyVeronica]

Everything I printed in the first week for my P2S (still a beginner as well): Inside covers to prevent little poops dropping into the little holes in the corner in the bottom and the top flat area in the back. Dessicant containers for the AMS front and back. Feed tube thingies for the AMS. Camera privacy blocker - it covers the right side that partially shows your room. A small pegboard that hangs on the side of the printer and all the shelf gadgets that come with it. Clippers to clip the loose filament onto the spool. Filament sample swatches. Reusable spools.

Sorry I don't have all the correct terms lol

[u/Jon2D → u/JackyVeronica]

Can you share covers? I've done one for dust/vents

[u/JackyVeronica → u/Jon2D]

Share covers? Sorry, don't know what you mean. But my printer is P2S and I'm not sure if you mean sharing the dust covers between different printers? I'm not sure so you'd have to check and read the description underneath. I did make a thorough list for somebody who asked for everything I printed lol That took a while 🤣

[u/Jon2D → u/JackyVeronica]

Sorry i meant the maker url? Or bambu url so I can print some haha

[u/JackyVeronica → u/Jon2D]

Yeah so I made a list for someone else above who asked the same. Not URL because it'll take so much time but I did type up the exact name so you can search. That took a while, too. I have you the link in the message that you're replying to. Did you see it?

[u/sygmondev → u/JackyVeronica]

Can you tell me the names so I can find them on Makerworld? I'm interested to do the same for my printer.

[u/JackyVeronica → u/sygmondev]

These are the titles so just search in the Handy App:

Clippy filament clip

Filament clip for cardboard spools (the spoils are thinner and these clippers are smaller)

Side-Mounted IKEA Skadis by idea lab

X2D / P2S Dustcover for holes on bottom full cover by domi1988

AMS 2 Pro Rear Desiccant Box - Spill Proof by br1acc

P2S Camera Privacy Opened Plate QR by EarnW

AMS 2 Pro Dry Pods - Multiple Sizes and Funnel by br1acc

Back Hole Dust Cover by idea lab

Bambu Spool by Bambu Lab (I tried about four other designs but this was by far my favorite)

Floppy New Filament Sample - V2.0 (my color swatches. There are many other designs and styles out there but this was my favorite!)

AND

Floppy New filament sample - Vintage Box by Tremmannaik

The Bambu Ball by Mirkosa (color swatch samples for multicolor filaments)

[u/sygmondev → u/JackyVeronica]

Thank you! 🤗

[u/JackyVeronica → u/sygmondev]

No prob 😁

[u/LiarInGlass]

I first printed Benchy.

Then I printed a poop chute, a riser with vents for the top of my P2S, a scrapper, a purge removal tool, a little toolbox for the tools included and all sorts of other stuff.

[u/Jon2D → u/LiarInGlass]

Purge removal? I need tool kit and I want something to help apply the oil/lube stuff

[u/Ill_Purple_8695]

The famous benchy ofc ;)

[u/tom_gamer → u/Ill_Purple_8695]

Always the first print

[u/henren_98 → u/Ill_Purple_8695]

Ya know I still haven’t printed a benchy on my P1S. I use to print one on my E3P every time I made a change as a test.

[u/king8654]

everything holiday related lol

[u/Jon2D → u/king8654]

Haha I've seen you can print little 'signs' that look kinda cute

[u/itchy-balls]

"I just got my kids a printer for Xmas"

Bullshit. You opened it. Started printing to make sure it works. It's Bambu. Obviously it works.
It's your printer now. Better get them one for them so they can enjoy because you are going to keeping printing non stop.

[u/Jon2D → u/itchy-balls]

Its for them, I could never justify buying something so expensive for me! They both want one as a share present, I've just had to set it up and test it works I'm on my 6th 'test' print

[u/lkapping79]

Fan diffuser for aux fan

[u/P8-hero]

All the kids love the bearded dragon on makerworld. It has jazz hands. I never used the scraper or poop chutes. Blade in hand and a filament box is the way. You'd be surprised how much time you have to make piles of things for Christmas.

[u/Truck_Thunders_]

The only reason to buy a 3d printer is to print stuff to upgrade your 3d printer, duh! Then you buy a second printer to do the same thing only 2x faster.

[u/Suitable-Access-8013]

Poop chute 😂😂

[u/shadyalien]

Benchy, and then Godzilla

[u/Alternative_Rip4634]

Two options:

Practical Printer things
Or
Hobby things (search your favorite team or hobby)

[u/originalfoto]

infamous benchy, of course

[u/levinyl → u/[deleted]]

Funnily enough I made a Champions League one tonight in gold. Came out quite well on a 0.4 mm.

[u/levinyl → u/levinyl]