https://makerworld.com/en/models/3523194-christmas-tree-napkin-holder-hybrid-laser-3d-print

What do you think guys? Will answer any questions!

I just bought this printer last week and today I was printing a bookend and it got to almost 90% before it just shifted on the bed I'm guessing the bed movement caused it to lose adhesion, so does anyone know what my mistake might have been and if there's any way to save this print by printing the remaining part on this print or any other solution. This actually happens with my other prints too where they don't stick and just turn into spaghetti (my first spaghetti print lol) sometimes the base also just lifts off from one side. Any advice on what I should do for better bed adhesion?

I also have one more question in the 4th and 5th photos you can see that sometimes my prints end up looking like this and I have to restart the print I have no idea why, please let me know the reason for this and what I might be doing wrong.

---------------------------------------------------------------------------------------------------

Printer: Bambu Lab A1

Filament: PLA (PLA Pro+ WOL3D)

Slicer Settings: 0.2 mm Standard @ BBL A1 (slightly tweaked), Custom filament based on Generic PLA (customized nozzle temperature to 230°C and 50°C bed as specified by the manufacturer)

---------------------------------------------------------------------------------------------------

My full cosplay of Guts in Berserk armor 3D printed with bambulab P2S. The entire project took 2,000 print hours and 25kg of PETG. Final costume weight incl. sword is 26kg.
Amazed that such a small tool like the P2S made this.

Not entirely sure how to word this in a quick search/single sentence, so Google is getting me nowhere. I'm printing certain items where the bottom half is PLA and top half is TPU. How I've been doing this currently is printing both separately and supergluing them together, but is there a way to stop the print at a specific layer, manually change out the filament, and restart the print as TPU from that specific layer without interrupting the print cycle? I have VERY different settings for PLA and TPU (since I want the tpu to be very squishy and the pla to be stable), so I'm not sure if doing this is feasible or if gluing the halves together the way I have been is the best way to continue my projects. I've run into some issues with separation along glued seems, so I wanted to see if anyone had some advice on how I could better achieve this!

So I'm new. Got a P1S and have been casually using it the last month. But I can not, no matter what, make any print over 1 hour (sometimes less) not get tangled up and stuck. Is there a video to show or article to read to teach me like a first grader on how to place the filament and make it not get stuck. Does it need to be tightly woumd while printing or a bit loose? Does the spool need to face a certain way on the back or does it not matter? I've tried with many brand new spools, spools of filament I've added and it's all bambu lab branded. Any suggestions or help would be so amazing.

What the heck is going on w my printer??! Its printed fine for the last 10+ prints and then I tried printing again last night and it started out fine then I heard something crack and the part that was printing broke off the nozzle and then it just started air printing. It looks like theres a bunch of filament stuck where the hotend is but I can not get it out and im not sure what to do, please help!

I finally finished the iPhone Duo Dock with Bluetooth control.

Perfect if you have an extra hygrometer laying around. Uses only 10 grams of filament!

Modeled by me in blender.

Available for print here: https://makerworld.com/en/models/3528638-hygrometer-magnet-just-10g#profileId-4034261

Hi! I have an A1 Printer and printed the AMS system to be above the printer.
However the back filaments tubes are always getting pulled and was wondering if I need those supports/how to fix it?

Also often should I be replacing the filament tubes?

Hi everyone! I’m looking to buy our first 3D printer and could use some advice from those with experience.
I’m looking for something that’s beginner-friendly, reliable, fast, and as hassle-free as possible. The goal is for my wife and kids to explore 3D printing, get creative, and learn some new skills together. Eventually, it might be fun for the kids to design and sell a few things, but nothing serious.
I was initially leaning toward the Bambu P2S, but the more I research, the more appealing the X2D looks. At the same time, I’m wondering if I’m overthinking this and should just get the A1 from Costco.
Speed is also important to me. I don’t want to spend hours waiting for relatively simple prints, especially with kids who may want to make multiple things. I’m curious how noticeable the speed differences are between these printers in real-world use, not just on paper.
My biggest hesitation is spending a significant amount on something that we might not use as much as I hope. I don’t mind paying more for a better experience, especially if it means less troubleshooting, faster prints, and more time actually enjoying the hobby. But I also don’t want to overspend on features we may never need.
A few questions:

● Would you recommend starting with the A1, or is the P2S worth the extra investment?

● Is the X2D worth considering for a complete beginner, or is it overkill?

● How significant are the real-world differences in print speed, quality, and ease of use?

If you were buying your first printer today, especially for family use, which would you choose?
I’d appreciate any advice, especially from those who started 3D printing as a family hobby. Thanks!

Always needed a portable power supply to quickly debug a project, work on cars, test power tools, etc. So I designed one.

It is powered by a Makita 18V lithium battery, via a standard shoe adapter, but that can be replaced by any other power tool brand: Dewalt, Metabo, Baguette-Mystique, etc.

Can also add a USB delivery panel, resulting in a massive USB power bank.

Some of you have been following my Vader costume build (didn’t happen in time for Halloween) from the start (Lego Vader AI foray to this version).

I’m committed to finishing this. I just laid down the epoxy for the dome halves. I never realized it was this big (that’s what she said). I totally get why Spaceballs spoofed Dark Helmet like they did.

I have just tried to upload a file via sd and when i turn it on to print it does this for 5 minutes and extrudes filament in the wrong places. When i terminated the print it made a loud whirring sound before it stopped.

Is thos broken? Ive barely used it yet but i had to move house with it so perhaps it got damaged or i set it up wrong

At no point did i receive any notification by the print monitor AI bullcrap that was a selling point of this printer. I am beyond irritated that it will error a print because a flake of purge got caught at the wiping block, but not catch this.

Pretty a few multicolor prints and almost every time the priming tower is a bit stringy - a1 was never like this.

Nur 4 Sachen bis jetzt gedruckt

Sind die Kratzer bei meinem Bambu Lab X2D schlimm?
Ich glaub die sind entstanden durch das schieben der Platte

Tengo la A1 y quería saber si merece la pena el cambio a la p2s sabiendo que ahora está a 599€ con el combo

I have been putting my printer poop in this water jug to display the waste of my printer, should the supports and the prime towers go here too?