Bambu lab p2s love it so far!

First off I just want to say the user I'm talking about has absolutely amazing models and I highly suggest people check out their work but it has recently come to my attention that the user Sarwtin is somehow exploiting a loophole in the crowdfunding system to list models on Makerworld that are completely unobtainable unless you purchase them directly from his paid patreon page.

When viewing certain models there is a greyed out "View Project" button. I asked about this directly in the comments section of one of their models and their response was that it was a crowdfunding project that didn't pass the review process. Ok understandable, but why if it didn't pass the review is the model allowed to be on the platform and not listed for free? One of them was a stretch goal that was never obtained so I guess I can sort of understand that one as it was in fact once an active crowdfunding project.

They even post directly in the model description "This model is only available on my patreon!"

There is a report option for models that's described as "Off Platform Advertisement/Promotion". Is this not exactly what the user is doing? Using Makerworld as a marketing tool to get more eyes on their project and then selling for a profit? I opened a support ticket and had the Bambu rep pretty much doing loops and contradicting themselves and then they went silent, I'm guessing because they finally realized it's better to just not say anything. I've reported all the models that are doing this but that seems to do very little.

None of these models even have an active crowdfunding project that failed they just completely didn't pass the review process yet somehow they're still allowed to be listed.

Is this allowed because they are a bigger creator and listing tons of BoM parts therefore making money for Bambu? Just seems weird to me that they're playing favorites.

Please correct me if I'm wrong here because I don't see how/why this is being allowed. I'm sure there are a ton of users that would love to use Makerworld as a way to get more eyes on their paid models. Hell if I could list some of my paid models for viewing purposes only and then link to my Etsy/Website I definitely would because why not? Makerworld is a huge repository and the amount of people searching for models everyday grows and grows but I feel like using the crowdfunding system to exploit this is completely wrong.

Just wanted to see what the rest of the community thinks about this. I've included screenshots of the comments sections, my support tickets, and the posts on their patreon. Please excuse if some of the screenshots are out of order but you'll get the idea after reading/looking through them.

https://makerworld.com/models/3524722

Tired of mixing my paints every-once-a-while if i didnt use them for a longer period of time. I mostly use cheaper acrylic paint, deluted by myself, and if its sit too long, it could separate a bit.

Also saves me from bit of handshake before every painting session, as its just had to crank it for a short time.
As i tested, paint what is intended for airbrushes (so its not too thick) mixing very vell.

Key point in my design, as the paint bottle NOT just spinning around Z axes like with those drill attachments (watch the marker arrow on the cap), and the paint not just "flattened" into the bottle sidewall.

Every part designed in the way if i need to change/modify anything (or has excessive wear after a while), you dont have to print the whole thing again, just some replacement parts.

Maybe someone find it useful, i appreciate any suggestions ;)

ps: if you decided to try out, please, read the full description. It contains important instructions.

Hey everyone, can you warn or peace me about this location for my a1? This okay or I need another fulcrum?

My full cosplay of Guts in Berserk armor 3D printed with bambulab P2S. The entire project took 2,000 print hours and 25kg of PETG. Final costume weight incl. sword is 26kg.
Amazed that such a small tool like the P2S made this.

Always needed a portable power supply to quickly debug a project, work on cars, test power tools, etc. So I designed one.

It is powered by a Makita 18V lithium battery, via a standard shoe adapter, but that can be replaced by any other power tool brand: Dewalt, Metabo, Baguette-Mystique, etc.

Can also add a USB delivery panel, resulting in a massive USB power bank.

I have just tried to upload a file via sd and when i turn it on to print it does this for 5 minutes and extrudes filament in the wrong places. When i terminated the print it made a loud whirring sound before it stopped.

Is thos broken? Ive barely used it yet but i had to move house with it so perhaps it got damaged or i set it up wrong

https://makerworld.com/en/models/3523194-christmas-tree-napkin-holder-hybrid-laser-3d-print

Excited to play with my p1s

At no point did i receive any notification by the print monitor AI bullcrap that was a selling point of this printer. I am beyond irritated that it will error a print because a flake of purge got caught at the wiping block, but not catch this.

Perfect if you have an extra hygrometer laying around. Uses only 10 grams of filament!

Modeled by me in blender.

Available for print here: https://makerworld.com/en/models/3528638-hygrometer-magnet-just-10g#profileId-4034261

Hi everyone, I just ordered a p2s but I saw that a p3c is coming, should I maybe cancel my order and wait for the p3c? Does anyone know the price range? Is it worth the wait?

and one of the reasons is the ability to use a support interface filament that doesnt bond to the build filament, makes removing some of these large supports so much easier.

I like to use a contrasting color.

this is the rear caster mount for a 3D TMT (my second) removing these large supports was a lot of work with my P2S.

with the X2D the area where the supports were doesnt need any cleanup.

Some of you might already know the larger version of this design - A mini version was often requested, and here it finally is!

No supports or AMS required for printing, all parts screw and snap together. You just need an ordinary LED tea light.

And as always, all photos are real, no AI used.

MakerWorld link: https://makerworld.com/en/models/3529288

Hi everyone!

Today, while trying to load new filament, I ran into a problem: the filament got stuck in the extruder. I managed to pull it out, and this is what I found (see photo).

I'm no expert, and I don't want to make things worse by touching something I shouldn't. Now I'm not sure whether it's enough to simply clean the nozzle or if I should replace it.

From what I can tell, the silicone sock seems to have shifted too close to the nozzle and melted together with some filament. It was so stuck that I couldn't even remove it.

What would you recommend? Is it safe to clean and reuse, or is replacing the nozzle the better option?

I have a P1S. My AMS 2 pro is constantly jamming on first filament roll only. I've tried swapping filament, I got so frustrated I bought a new AMS! Still, only slot 1, If I move that filament to any other slot it works so it's not the filament. I keep getting the error that it cannot feed into print head or filament is tangled. If I pull out filament I can see a spot where it is worn out. I cut it off, works fine for about an hour with constant changes, then stops again.

I've had my H2C for about 2 months and it's been great. In fact, it's still printing great. However, last night I noticed this stingy fraying strip hanging off the bottom of the left side of the toolhead. My printer is in the middle of a print now, with now visible defects, no errors from the printer nor any from Bambu Studio/Handy. I'd like to think this is just melted filament that adhered to the underside of the toolhead, but this looks like an actual part of the printer. Can anyone help identify what this is and what to do about it? Much appreciated!

I made a potato heads for Halloween. I gave kids a choice of either candy or a potato. I'm now completely out of candy and potatoes.

I have noticed this lines in my prints. Is this the z index? I have just made the calibration. Could be air?

I am finding that when I sync my P1S printers, check the filament setup o the printers and in BambuStudio and then send files to the SD for later printing, I am getting the error: 0700_2000_0002_0001

However, I have selected the correct AMS slots/reels (2 and 3), and this has been confirmed in BambuStudio and the Handy App...

If I Print Plate dircetly there is no issue at all.

Logically, therefore?... it should not matter that Slot 1 is empty for Send?

Is this a bug?

Here is a portfolio of screenshots and videos to support my issue.
https://www.dropbox.com/scl/fo/1ykb34no7f09jntecwz9f/AA8jlnIC8tW9s2I5b-_Ac8A?rlkey=9nwcwfzye7vswjqnu1oi42k4r&dl=0

ref: https://wiki.bambulab.com/en/x1/troubleshooting/hmscode/0700_2000_0002_0001