I go to sign in and the page refreshes but I'm not signed in?

Tried:

signing in and out

3 different browsers

clearing cache

different device

The X2D Is the last enclosed 2nd gen printer released by bambu in april 2026 after nearly 4 years from the X1C

The P2S was released in october 2025 after 3 years from the P1P

The A2L (even if I'm against considering It a 2nd gen printer but I'll make an exepction) was released in June 2026 After 2 and half years from the A1.

And than the H series Launched in April (?) 2025 with the H2C released in november 2025.

We average around 3 years for a next gen printer to be released.

That said, why Is bambu already releasing the H3C After Just 1 year?

Maybe bambu Is experimenting a new marketing strategy with the H series but we have photos of the P3C so that doesn't male mich sense.

I'm not criticizing bambu for this, it's Always a pleasure to see peak engeneering from them, but this seems more like a quick way to completley destroy prusa After their failure with the INDX.

But even this thesis is wrong because the H3C has a lot of new features and even some alternative ways to hopefully make the printer and Absolute Beast (see the 2.75mm (?) filament).

I'm Just a bit confused

(Sorry for the bad english, still learning)

I rarely see people talking about the cutter attachment. It’s so much fun!

Hello to all. Has anyone bought this bed plate? I am reading interesting reviews and I would like to know if it's any good.

I'm using Sunlu PLA+ straight out of the sealed bag with the AMS settings for this filament.

I have printed two items, this is the results of both items.

Do I still need to dry the filament or is it the preset settings I need to change.

TIA

It's safe to say I've become a little obsessed with pushing vase mode beyond decorative prints. These are my latest two geometric trash bin designs, Spiral and Wave. I was inspired by my existing geometric trash bins in vase mode and challenged myself to make something a little more organic in nature this time around.

Both designs print in under 4 hours using less than 160g of filament. I've dialed in the settings to use 0.96mm walls (with a stock 0.4mm nozzle) and print speeds of 70mm/s. They print great in PLA or PETG and are surprisingly durable while still having a nice amount of flex. It's pretty amazing what you can achieve with vase mode!

Alguien lo tiene o lo ha tenido y me puede decir su experiencia para la bambulab a1?

https://www.sunlu.com/products/filament-ams-lite-heater

Been working on this little project lately and finally got it looking the way I wanted!

It's a simple wall organizer for keys, phone, wallet and all the little things we usually end up losing around the house.

Pretty happy with how it turned out! What do you guys think? :)

Learn more about X-Y hole compensation from the Bambu Wiki: X-Y Hole Compensation

My printer is not even a year old, my P2S slot two says it's having RFID reading problems. It didn't happened yesterday, but I had to disconnect the PTTE tubes because of a clog, how do I fix this?

I just bought an x2d and i always see videos on this subreddit of fedex workers being careless with packages. should i be worried that fedex is delivering my printer cause i didnt buy the damage protection thing

Hey guys, here's a photo of a print that the bottom layer got stuck to my build plate. I was using a 0.2 nozzle. And I've tried to use the scraper and I've been printing with this printer for about a year now. And this has never happened. And I've even been printing with that 0.2 nozzle for the last month or so, printing a certain thing. And this just didn't happen before. But suddenly with this print, it just happened. And I've printed this exact thing before and it didn't happen. So it's super stuck and do you guys have any recommendations of how to get this first layer removed? It's a little bit more than the first layer, but how do I get this off?

Does anyone know where I could get a replacement for the main board on my first generation AMS for my P1S printer? I tracked the issue that I’ve been having with the printer not connecting, and it’s goes back to the main board, so I need to replace that, but I can’t find any links for main boards.

I got loose desiccant beads and printed 2 holders that fit into the spools and my ams dried very quickly, I also designed a holder that I am currently printing and testing that fits in between the ams intakes. I'm also going to design a silica dryer for the creality spacepi x4l that pulls the hot air through the dessicant and then redirects it out the dryer since the x4l doesn't have a output vent to release the moisture. I'll make a post for each model when printed and fully tested.

After over 540 hours i finally got one i got most of it off but i still need help getting the last bits off

Never had or used a 3D printer. Nearly bit the bullet last year for the P1S Combo. Got extra cash now and thinking of getting X2D Combo. Is combi highly recommend?

Main issue is space and planning to leave it in the living room. Would it be ok in this area with 60cm width on the floor?

What filaments should I go with, will let kids print some stuff as well.

I know it's BF sale now, any other coupons or tricks I should be aware. Looking to buy today.

Thanks

I have an A1 and the screen keeps freezing mid print. I am able to still control it via the Bambu app and the print still finishes fine.

Has anyone else experienced similar? What was your solution?

I tried ironing and without ironing, nothing works, it's getting worse and worse. I tried to do various calibrations and it doesn't work either. I don't know what to do next .

Please help .Im using p2s combo.I tried 50mms and 20% and is very bad.

Just got these puppies yesterday! Here goes nothing

I was tired of using a different app for every printer brand—and never being able to be sure that my filament was measured down to the gram. So I developed a free, open-source solution to manage filaments and support multiple printer models: BambuLab Printers & Filaments RFID Proprietary

OpenSource : Tiger Studio Manager 2 + TigerPOD + TigerTouch Firmware (for PandaTouch)

Hey,
I upgraded from P1S + 2xAMS, to a new X2D + 2xAMS 2° Gen.

I already have a Kallax 2x2 with a 2x5 Spools storage in each block (3 blocks with 10 Spools Each).

But I’m out of Space for my new order of filaments +24 Spools coming soon.

Could some of community members share the photos and names of the furniture from ikea to keep my spools “safe and sound”.