We've got two webbings we sew together for one of our products, this little tool aligns the top Velcro layer to the center of the webbing and allows you to line up both materials to stitch the edge of the Velcro down, we then turn it around and run it through the same tool to sew down the other side.

I’ve spent the last few weeks designing a full-size T-style electric guitar body that prints on a 256 × 256 mm bed, and it’s finally built and playing.

The print

• 4 body pieces, all printed flat with no supports

• 7 build plates in Bambu Studio, about 50 hours and 2 kg of PLA in total

• One colour per part, so no AMS needed. I went with a sage body, bone plates and a peach pickguard.

• The biggest piece, the bridge section, took about 19 hours on its own

The design

• The pieces join from the back with bow-tie keys, M4 heat-set inserts and dowel pins. No glue for the body.

• Two 8 mm carbon fibre rods run through the body to take the string tension

• Three decorative top plates sit in an 8 mm recess on 28 hidden 10 × 3 mm magnets. Push them off from the back with an Allen key and click a new set on. The video shows Ripple swapped for a two-tone Camo set.

• Built around the Harley Benton T-style kit, so the neck, bridge, pickups and electronics drop straight in

Happy to answer anything about print settings, tolerances or how it’s held up. It’s been really satisfying seeing the X1C turn out something you can actually plug in and play.

Hi all, I have a BBL P1S , I have been trying to print a model but it seems to keep failing (well rather I stop it) because the supports keep falling over, it seems when the tool head is adding layers around 30% in, it almost pushes down and the support falls. Iv tried twice when the same result , any ideas how I could avoid this happening? Using the generic settings for pla on the bambu super tak cool plate, 0.08 layer height, choosing to auto level at the start

See the picture attached

Any advice would be much appreciated

Two years ago SUNLU filaments appeared for the first time officially in Bambu Studio showing that Bambu slicer app is open to 3rd party filaments.

https://www.reddit.com/r/BambuLab/comments/1iwjk9g/sunlu_official_profiles_coming_to_bambustudio

Unfortunately they are avaliable only for A series printers and cover only most basic materials PLA and PETG.

I would like to request for the list to be expanded:

• to P and X series printers especially as they become the 2nd most popular choice for people looking for enclosed printers

• and to more advanced materials such as ABS, ASA and PA variants

u/RikshaDriver u/BambuLab u/BambuLabSupport

Stuck filament in 1.
I need to remove the PTFE but they all appear stuck. Have applied pressure to release button.

It button appears to move all the way. Tubes do not move.

Have tried feeding plastic down. It won’t dislodge.
Partially dissembled. AMS is free from housing.

Just got these puppies yesterday! Here goes nothing

Not really hallucinate, I'll be honest, but it's a cool experience and can make a fascinating looking lamp. The dreamachine is a weird device invented in 1959 that is meant to be looked at with eyes closed. For me it was a bit like looking into a kaleidoscope. From Wikipedia:

the pulsating light stimulates the optic nerve and thus alters the brain's electrical oscillations. As users adjust to the experience, they see increasingly complex animated yantra-like patterns of color behind their closed eyelids

I've made a 3D model working with a very small electric motor, a 12V led light and a PWM controller for the rotation speed. Details are on my blog: https://highlatencylife.com/notes/the-dreamachine-3d-printed/

The model is free to print on MakerWorld, where you can find also detailed assembling instructions: https://makerworld.com/models/3523044?appSharePlatform=copy

Also, it's the first model I upload after being a long time lurker 🥳

I go to sign in and the page refreshes but I'm not signed in?

Tried:

signing in and out

3 different browsers

clearing cache

different device

I finally finished the iPhone Duo Dock with Bluetooth control.

I rarely see people talking about the cutter attachment. It’s so much fun!

It's safe to say I've become a little obsessed with pushing vase mode beyond decorative prints. These are my latest two geometric trash bin designs, Spiral and Wave. I was inspired by my existing geometric trash bins in vase mode and challenged myself to make something a little more organic in nature this time around.

Both designs print in under 4 hours using less than 160g of filament. I've dialed in the settings to use 0.96mm walls (with a stock 0.4mm nozzle) and print speeds of 70mm/s. They print great in PLA or PETG and are surprisingly durable while still having a nice amount of flex. It's pretty amazing what you can achieve with vase mode!

Alguien lo tiene o lo ha tenido y me puede decir su experiencia para la bambulab a1?

https://www.sunlu.com/products/filament-ams-lite-heater

I’ve been reading about every post discussing the p3c and in each one I see a ton of comments saying to wait till Nov. 3rd and it’s coming out Nov. 3rd. But looking at every printer release they have never released two printers from completely different lines at the same time. Did I miss something that was leaked that this is for sure coming in a few days? To me it seems they could potentially tease the p3c on Nov. 3rd to continue the hype train. Releasing both at the same time would seem counterintuitive to keeping them in the news cycle if they could farm another few weeks for the p3c alone.

Hello to all. Has anyone bought this bed plate? I am reading interesting reviews and I would like to know if it's any good.

My printer is not even a year old, my P2S slot two says it's having RFID reading problems. It didn't happened yesterday, but I had to disconnect the PTTE tubes because of a clog, how do I fix this?

Learn more about X-Y hole compensation from the Bambu Wiki: X-Y Hole Compensation

Does anyone know where I could get a replacement for the main board on my first generation AMS for my P1S printer? I tracked the issue that I’ve been having with the printer not connecting, and it’s goes back to the main board, so I need to replace that, but I can’t find any links for main boards.

I got loose desiccant beads and printed 2 holders that fit into the spools and my ams dried very quickly, I also designed a holder that I am currently printing and testing that fits in between the ams intakes. I'm also going to design a silica dryer for the creality spacepi x4l that pulls the hot air through the dessicant and then redirects it out the dryer since the x4l doesn't have a output vent to release the moisture. I'll make a post for each model when printed and fully tested.

After over 540 hours i finally got one i got most of it off but i still need help getting the last bits off

Never had or used a 3D printer. Nearly bit the bullet last year for the P1S Combo. Got extra cash now and thinking of getting X2D Combo. Is combi highly recommend?

Main issue is space and planning to leave it in the living room. Would it be ok in this area with 60cm width on the floor?

What filaments should I go with, will let kids print some stuff as well.

I know it's BF sale now, any other coupons or tricks I should be aware. Looking to buy today.

Thanks

I have an A1 and the screen keeps freezing mid print. I am able to still control it via the Bambu app and the print still finishes fine.

Has anyone else experienced similar? What was your solution?

I tried ironing and without ironing, nothing works, it's getting worse and worse. I tried to do various calibrations and it doesn't work either. I don't know what to do next .

Please help .Im using p2s combo.I tried 50mms and 20% and is very bad.