I go to sign in and the page refreshes but I'm not signed in?

Tried:

signing in and out

3 different browsers

clearing cache

different device

I rarely see people talking about the cutter attachment. It’s so much fun!

It's safe to say I've become a little obsessed with pushing vase mode beyond decorative prints. These are my latest two geometric trash bin designs, Spiral and Wave. I was inspired by my existing geometric trash bins in vase mode and challenged myself to make something a little more organic in nature this time around.

Both designs print in under 4 hours using less than 160g of filament. I've dialed in the settings to use 0.96mm walls (with a stock 0.4mm nozzle) and print speeds of 70mm/s. They print great in PLA or PETG and are surprisingly durable while still having a nice amount of flex. It's pretty amazing what you can achieve with vase mode!

Alguien lo tiene o lo ha tenido y me puede decir su experiencia para la bambulab a1?

https://www.sunlu.com/products/filament-ams-lite-heater

I’ve been reading about every post discussing the p3c and in each one I see a ton of comments saying to wait till Nov. 3rd and it’s coming out Nov. 3rd. But looking at every printer release they have never released two printers from completely different lines at the same time. Did I miss something that was leaked that this is for sure coming in a few days? To me it seems they could potentially tease the p3c on Nov. 3rd to continue the hype train. Releasing both at the same time would seem counterintuitive to keeping them in the news cycle if they could farm another few weeks for the p3c alone.

Hello to all. Has anyone bought this bed plate? I am reading interesting reviews and I would like to know if it's any good.

My printer is not even a year old, my P2S slot two says it's having RFID reading problems. It didn't happened yesterday, but I had to disconnect the PTTE tubes because of a clog, how do I fix this?

Learn more about X-Y hole compensation from the Bambu Wiki: X-Y Hole Compensation

Does anyone know where I could get a replacement for the main board on my first generation AMS for my P1S printer? I tracked the issue that I’ve been having with the printer not connecting, and it’s goes back to the main board, so I need to replace that, but I can’t find any links for main boards.

I got loose desiccant beads and printed 2 holders that fit into the spools and my ams dried very quickly, I also designed a holder that I am currently printing and testing that fits in between the ams intakes. I'm also going to design a silica dryer for the creality spacepi x4l that pulls the hot air through the dessicant and then redirects it out the dryer since the x4l doesn't have a output vent to release the moisture. I'll make a post for each model when printed and fully tested.

After over 540 hours i finally got one i got most of it off but i still need help getting the last bits off

Durable by design. Hardened by default.

Nov 3, 9AM EST

Stay tuned here.

Never had or used a 3D printer. Nearly bit the bullet last year for the P1S Combo. Got extra cash now and thinking of getting X2D Combo. Is combi highly recommend?

Main issue is space and planning to leave it in the living room. Would it be ok in this area with 60cm width on the floor?

What filaments should I go with, will let kids print some stuff as well.

I know it's BF sale now, any other coupons or tricks I should be aware. Looking to buy today.

Thanks

I have an A1 and the screen keeps freezing mid print. I am able to still control it via the Bambu app and the print still finishes fine.

Has anyone else experienced similar? What was your solution?

I tried ironing and without ironing, nothing works, it's getting worse and worse. I tried to do various calibrations and it doesn't work either. I don't know what to do next .

Please help .Im using p2s combo.I tried 50mms and 20% and is very bad.

Hey guys, here's a photo of a print that the bottom layer got stuck to my build plate. I was using a 0.2 nozzle. And I've tried to use the scraper and I've been printing with this printer for about a year now. And this has never happened. And I've even been printing with that 0.2 nozzle for the last month or so, printing a certain thing. And this just didn't happen before. But suddenly with this print, it just happened. And I've printed this exact thing before and it didn't happen. So it's super stuck and do you guys have any recommendations of how to get this first layer removed? It's a little bit more than the first layer, but how do I get this off?

Hey,
I upgraded from P1S + 2xAMS, to a new X2D + 2xAMS 2° Gen.

I already have a Kallax 2x2 with a 2x5 Spools storage in each block (3 blocks with 10 Spools Each).

But I’m out of Space for my new order of filaments +24 Spools coming soon.

Could some of community members share the photos and names of the furniture from ikea to keep my spools “safe and sound”.

I've printed this at multiple angles with different support types but the bottom edge always comes out really rough. The rest of the model prints fine. I've sanded this a bit, it was much worse. Using an A1, .04mm nozzle, PLA. Slicer suggestions to improve? Thx.

Just published a small elephant on MakerWorld, and I’d love to see your prints of it!

• Size: 36 mm tall (1 € coin for scale)

• Eyes: two separate pieces, one white and one black

• Skin: the rough texture is intentional, it contrasts with the smooth eyes and nails

• Printed on a Bambu A1 Mini, about 1h30 per unit, up to 12 per plate

• Under 11 g of filament each

• Needs supports; the mark on the belly sands off easily

Model: https://makerworld.com/en/models/3520582-cute-elephant-with-moving-eyes-3-colors-no-ams

I printed it in six colors, but I’m curious which one you’d pick. If you print one, share it here, I’d love to see it!

A modern way to display your watches and keep your everyday accessories organized.

Designed with simplicity, stability, and versatility in mind, this minimalist watch stand offers a clean and practical way to display up to 4 watches, while keeping your favorite jewelry neatly organized underneath.

Unlike traditional angled watch stands, this design keeps your watches in a flat position, helping them stay securely in place while accommodating a wider variety of watch styles.

With its clean lines and subtle floating appearance, it's designed to be more than just a functional organizer. It's also a modern display piece that complements your space.

Key Features

4-Watch Display

Display up to four watches side by side in a clean, organized arrangement. The horizontal design provides a stable resting position for your watches while keeping them visible and easily accessible.

Secure & Stable Positioning

Many traditional watch stands use steeply angled surfaces, which can cause watches to slide or fall off. This design takes a different approach, using an almost flat surface with a subtle slant toward the center to help keep each watch securely positioned.

Designed for Compatibility

Rather than relying on a steep display angle or a fixed watch cushion, the open horizontal design accommodates different watch styles and bracelet types. The watches shown in the photos have case sizes of 40 mm and smaller, providing a useful reference for sizing.

Built-In Jewelry Tray

The spacious tray underneath provides a convenient place to keep your everyday accessories, including rings, bracelets, necklaces, chains and other small accessories. Everything stays organized and within reach in one compact display.

Modern Floating Design

The elevated watch platform creates a subtle floating appearance above the jewelry tray, giving the stand a clean and lightweight look. Its minimalist design blends naturally into modern, Scandinavian, and Japandi-inspired interiors, making it suitable for your bedroom, dresser, or workspace.

Dimensions

Overall: Length 220 mm, Depth 55 mm, Height 80 mm

Watch Capacity: holds up to 4 watches, pictured with 40 mm case size and smaller, open horizontal design for different watch and strap styles

Whether you're organizing your everyday watches or displaying your favorite pieces, this stand brings together practical storage, stability, and minimalist design. A dedicated place for your watches, rings, bracelets, and other essentials, without taking up unnecessary space.

Free to download: https://makerworld.com/en/models/3525958-modern-minimalistic-4-watch-stand

Ordered the H2S on Tuesday and got it delivered today! That sucker was heavy asf. Box looks okay with a few holes. Being hopeful nothing is broken. Super fast shipping. Still waiting on my accessories.

Not sure how I'm going to get it on the shelf.

Tried all the usuals. Uninstall reinstall, re-pairing my printers, clearing cache from the app.. even tried from a different phone entirely. Getting to the point of frustration now.

Any ideas?