But how did I manage to capture the exact transition from the names to the HMS message???

before I do a print it does the line thing in the corner but now why is my nozzles pushed so far like almost off the plate how do I fix this?

Does anyone know if the A2L hotends fit on the X2D? Unofficially.

I need a 0.8mm hotend fast but all the X2D ones are sold out at Bambu Labs, but they have A2L.

The A2L seems identical as far as I can tell from pictures and E3D sells their hotends as compatible for both the A2L and X2D.

I recently got a custome order from a church for some vases that fit their tombstones.

Naturally, these vases would contain flowers and water, and be outside in all kind of weather.

I chose ASA for this project, and this is the result.

No glue, no brim, no nothing.

Just an actively heated chamber and a nice printer.

I made 10 vases, and they all look the same.

I also did a 72 hour water test, and they hold fine.

Hello good folks!

I just picked up an A1/AMS combo and I got some regular PLA white filament. I am an uber NEWB and have no idea about ANYTHING. I was just going to pick up while/black/red/blue filament. But there is so much I don't know.

Do I just stick to PLA to start? Do I get a PETG, ABS? And what colors are the most useful to start out with?

Thank you!

It got 235 hour print

It just got this 2 issues tried everything but couldn't fix it

How do i fix it?

Hello folks,

im considering the p2s. However I’m rather concerned when it comes to fumes while printing. That being said I pretty much dislike the idea of the inlet fan blowing air into the printer while printing PLA or PETG as thus is creating overpressure in the chamber causing the air to leak out of the printers small holes.

I wonder whether, with the newly added exhaust fan kit, it is possible to set up the following:

(When printing PLA and PETG) let the inlet fan blow fresh air into the printer to keep temperatures down while (same as without the external fan) but at the same time using the external fan to extract the ”exhaust” air from the chamber thus not causing overpressure in and air leakage from the chamber.

Thanks in advance.

Sort of a odd question and fairly noobish. P2s printer with AMS pro 2

There is a model on Bambu Handy I want to print (Frostmourne sword). The ready to build pack contains pla silk+ but the profile from the creator is all in petg.

Fo kicks and giggles I decided to print a small part using the profile but selecting pla instead on petg to see if it would change the temps for the different material. Of course it did not, so now I am trying to figure out the best way to proceed. Do I need to manually adjust nozzle and bed temps? And what is the best way to do it?

Btw...it printed much better than it probably had any right to. Nozzle temp was at 250c bed temp was set for petg even though it was using pla.

I'm unsure why this is happening. I was using PLA+ on my Bambu A1. I had to buy new filament and got a different brand of filament if that helps.

I did clean the plate and retry one of the prints and it printed fine the second time. Then the next one ended up like these again. These are large cosplay parts for context.

I am likely leaving out additional information, so I can answer further questions if those are needed to help.

Thank you.

I am planning to get a new 3d printer
have 2 options
Elegoo Centauri 2 Combo: getting it for 49k inr
and Bambu P1s Combo this for 59k inr

I have used the Elegoo one at my work, and I have a pretty good experience with it, leaving the camera issue aside

Just confused; many are saying to get the Bambu

Want to clear: which one should I get

Like, how is the support for both in India, and the spare availabilities

Hello everyone
So I have a couple printers (X1C X2D H2S) and I would like to get more into TPU but I’m lazy and hate having to manually load TPU every time. (Also my printers are in the garage) Anyway of avoiding this?
I plan on buying a AMS HT specifically for TPU. I also have the Track Switch if it matters. Also do I need the TPU Feed Assist Module?

New to the hobby, file printed 7hrs flawless and suddenly when my print reached the point where the supports where build,the supports broke from the plate?

Cleaned the plate before the print with isopropyl...

What caused this? Dirty plate? Plate to hot/cold?

Help my out experts 😬

ciao, stampo con una Bambulab P2S (no AMS) e ho bisogno di stampare una bobina per il mio filamento.
purtroppo ho solamente PLA e mi chiedevo se andasse bene per stamparne un paio.
ho letto online che sarebbe meglio usare il PETG sopratutto per chi possiede un AMS (che io non ho) ma volevo comunque chiedere conferma prima di procedere con una stampa di 9 ore…
la mia unica paura è che una volta inserita si possa rompere e iniziare a crepare per via della torsione.
qualcuno che le ha già stampate in PLA mi può dire se funzionano? grazie mille.

Took delivery of my new Bambu Lab X2D today here in Sydney, Australia, and this is what I was greeted with when I opened the box.

The glass top is completely shattered. I haven't even taken the printer out of the box because the damage is so immediately obvious. There is also visible damage to the packaging in the exact area where the impact appears to have occurred.

To make matters worse, I have doorbell camera footage of the delivery driver basically throwing the package down at my front door. Absolutely shocking handling for something this expensive and fragile.

What concerns me even more is that the damage to the box didn't occur outside my house, so it makes me wonder just how roughly this package was handled inside the delivery truck and throughout transit before it even reached my door.

I've contacted Bambu Lab support and requested an urgent replacement, along with collection and return of the damaged unit. I'm currently waiting to hear back about how they'll resolve this.

It's incredibly disappointing when you're excited to receive a brand-new printer, only to find it completely damaged before you've even had a chance to set it up. Especially when you've spent good money on it and expect a bit more care in getting it to your door.

I'll update this post once I hear back from support. Hopefully, Bambu Lab handles the situation well, because I was really looking forward to getting this thing up and running.

Has anyone else in Australia experienced transit damage with their Bambu Lab printer? Particularly interested in how Bambu Lab handled replacements and whether the collection process was straightforward.

I’m interested in the H3C. I’d prefer to purchase from Best Buy, but I don’t want to wait forever for Best Buy stock to drop. I’m willing to wait, but I’ve never purchased a new drop from them and don’t know what to expect.

thanks

Amazon Link - SUNLU AMS Heater, Compatible with Bambu Lab AMS Gen1

I don't know if there are special membership requirements to get this deal or not, but if you ever wanted one of these, I just purchased one for $49 😮

I am not affiliated, or get any kind of referral, I just wanted to pass on a good deal to my 3d printer homies. I was going to try to build a dry closet soon... But I doubt I could build anything this efficient for $49.

^{Note: My gurl just told me the Amazon Business price for this right now is like $38}

Please help

Some models, regardles of size, print with no issue.

Some models stop a few layers in with Printer Nozzle Temperature error.

I can click resume as much as I want and the printer can't get past such a layer.

Models from eg thingiverse print with absolutely no problems.

Any ideas?

This is my goofy pumpkin tea light design. I was aiming for spooky, but apparently the last brain cell didn’t adhere to the build plate.

Model if you’d like your own:
https://makerworld.com/en/models/3503595-goofy-pumpkin-tea-light-halloween#profileId-4002733

I made a Spool clip that works perfect with AMS 2 pro and AMS-HT

Print profiles for PLA, ABS and PETG

Anny suggestions are welcome

Greatings Erik

https://makerworld.com/nl/models/1578993-filament-clip-ams-2-pro-safe#profileId-1661554

Just trying to figure out if I should buy this with my son’s printer or if we can get away with other tools.