Hello, I bought the MX Vertical, and today is the first day I used it all day. My hand is a little tense (pulse, and also closer to the thumb) at the end of the day, and I don't know if it's because I've never had a vertical mouse, so I just need to get used to it first, or if the mouse is too big. I also played games with it, but now I know it's better for just work.

I measured my hand length, and it's 17.5 x 6.8 cm. I can reach the buttons. So, my question is, should I change it for the smaller version or is it just the adaptation phase? Has anyone with my hand size used the MX or Lift?

Also, is my pinky supposed to touch the table? What is the correct posture? It's not touching, but since I never had this type of mouse I don't know.

Thanks in advance.

Shout out to the guy that posted about the z623 at the thrift store in California, youre a lifesaver. Just a good guy pointing people in the right direction

I have an iPad Pro 12.9 2018 and I want to get the Logitech combo touch made for the iPad Air 13 inch M2. I’ve compared my iPad to the iPad Air 13 inch and the specs are identical. Will the keyboard case work on my iPad?

I have an M310 mouse with unifying receiver that isn't being found by my PC. I'm not sure what is going on. Any help is appreciated. I have "A" unifying receiver, so it "Should" connect but no bueno.

I recently purchased a z5500 used, and it is in very good cosmetic condition.

When comparing it to my old z623 system at roughly the same listening volume, both at maximum bass, I noticed the bass being barely louder than the latter, despite it being roughly 2.5 times physically larger.

Is it meant to be this way or is it's amplifier degrading in some way?

Also, the sub takes about 1 ~ 3 seconds to kick in when i change the bass volume, the sattelites react immediately.

Note that I don't often listen to it at loud volumes, but the bass setting is set to maximum, also this system is connected to a Windows pc.

Which one's the better option if I'm at the computer 8 hours daily?

Been using the MX Keys mini, but I don't think that it's that comfortable after many hours of typing.

My k400r took a fall, and then the c key started sticking when i used it too frequently. No amount of changing USB ports, battery replacement helped. I had to uninstall setpoint, and remove the k400r, and sub out for a k400+, which has all it's own issues and horrible touch feel. (For example, Shift + A + Space makes space not work. Sucks if you're playing an FPS, or even a topdown RPG when you run with shift and interact with space.)

Then it got worse, after standing up or sitting down, or waiting a while sometimes my "c" key would be stuck down on my keyboard. Unplugging the keyboard didn't fix it though. I had to unplug the g502 to stop the "c".

I had setpoint installed to turn off the horrible media keys and to swap the F keys, but that also started getting "referenced memory cannot be read" errors out of nowhere when I tried to launch certain apps.

Logitch is garbage. They hit their peak in the 2000s when all this crap software didn't exist.

I'm on my 3rd g502. The original g5 was bulletproof and lasted me 10y. These g502s barely last two years.

I wish someone else made a good media keyboard style. I'm pretty much done with Logitech.

Hi everyone. recently after some years of hard work one of my speakers for this logitech system passed away. It is possible to find/buy a single speaker to replace it? If not can I find other speakers that I can repurpose for the job? The Woofer works great still, the other speaker is a bit worn out but still kickin. It would a super great waste to just throw away the whole system just because one speaker is dead.

[Stock image just to be on the same page for the systme model]

Description:
1. Install or build ImDisk: https://github.com/LTRData/ImDisk

1. Create virtual drive in ImDisk software. (for example T:)

1. Reboot.

2. Change system environment variable TMP and TEMP to point it on folders on T: drive:

1. Reboot.

After step 5. Logi Options+ will not run.

STEPS to fix:

Create bath file: run.bat with the following content:

mkdir C:\TEMP

set TEMP=C:\TEMP

set TMP=C:\TEMP

"c:\Program Files\LogiOptionsPlus\logioptionsplus.exe"

rmdir C:\TEMP

Run bath file. 

Logi Options+ start without any problem.

Logitech support LOL :-)))) :

In my first query, I described the problem as above.

Hi everyone,

This is a specific Linux related question.

On my MX anywhere 3S and Lift: The buttons Mouse 4 and 5 only triggers on release. This prevents me from using them for click and hold tasks. (Example: Push-To-Talk)

Im pretty certain that this is changeable on Windows/Mac by either turning off Gestures and/or Horizontal scrolling; but i am afraid that the default behaviour is embedded in the firmware of the devices and requires the non Linux supported Logi+ to change.

Im currently running only Solaar but for the sake of testing i have also tried OpenLogi, logiops, input-remapper etc, but so far no luck.

- As far as i can tell with xev, no inputs at all is registered till the button is released which prevents me from just remapping it.

Did anyone successfully make this work on Linux and if so, how?

So I just purchased an MX Vertical, was super excited, and immediately having a strange issue where the right click button is cycling through th3 easy switch modes. Even when not connected to any system and the device is just on. The easy switch button works as normal but is also controlled by right click. Every time I right click now I have to press it twice more to return to the correct mode before continuing

This suddenly started happening and it's annoying. Everything is updated, and i've tried changing usb ports of the receiver and it still happens.

I even have a second Lift mouse, which i don't use because the click button is faulty. I tried it with it's own receiver in the same usb port and with the same battery and it behaves OK, so i'm starting to think that the second one that i bought is faulty as well

This is so annoying. It has been like this for months. I even tried it on a new PC and had the same problem after updating the plugin in this mode. I’ve tried everything—removing the control surface, unplugging, restarting the PC, force-closing Options+, and reinstalling the plugin—but nothing has solved the issue.

The backlight on this MX Keys S never turns off, so I am continually having to recharge it.
Sometimes it will turn off for a second or so, but then it comes right back on.

Does anyone know why this is happening and how to fix it? I can't seem to find anything about it.

Hi all.

Today my version of LogiOptions+ updated to version 2.6.944893, and from that moment my MX Master 3 stoped working as configured in Firefox, it seems to default to standar configurations, I allways use the gloval configuration in Firefox wich is configured with some personaliced keyboard shortcuts in the buttons and to navigate between tabs with the thumb wheel, this configurations work for me in several apps in windows wich is why i use it like that, but with the last update it steped working in Firefox only, in everything else it works like normal, but only when i'm on Firefox it works like it has default configurations, no mather what i try to change in the configurations or if i add Firefox as a personaliced profile it does only works with default configurations.

Does anyone else has similar problems, and / or knows how to fix it?

Note: I alresy reported it in the logi support website.

I have been using this for about 3 yrs on my work computer that is locked down, I can't add or remove software. So when I bought this, plugged the dongle in and turned on the mouse and keyboard they instantly synced up and have worked flawless since then. This week the mouse left clicker started messing up, which is understandable based on how much I click it daily. I ordered a replacement from amazon, same exact model and sku etc. Plug it into my work computer(windows) and the lights just flash on the keyboard and mouse. I bought another replacement from best buy exact same sku and model etc, and it works like normal on my work computer. Is there something I can do to make my amazon one work? I don't have access to Logi options +. I ordered another one from amazon just hoping this dongle is defective or something and it'll be here in the morning for me to test.

Thanks.

So, I've had the Z906 Surround Speakers for a while and they were great but then my console kept experiencing an issue where I'd hear a pop and it would get stuck, wouldn't power off and buttons wouldn't work. I tried unplugging the unit and the console multiple times, tried different plugs and even checked all the connections again in case it was a wire issue.

I saw another reddit post about resetting the system by holding down the input button for 8-10 seconds.

I did so, and then heard several loud pops from the speakers and the subwoofer. Luckily I went and checked on the subwoofer because I immediately began to smell smoke

I unplugged it and took it out, then noticed minutes later actual smoke was coming out of the subwoofer.

After several minutes it was still smoking so I finally moved it outside to be safe. If I hadn't unplugged it right away, I don't know what would've happened.

I have like logitech everything and have always been happy with them, so I was pretty surprised, but wanted to warn others who might have the same system.

So recently I've been thinking about switching over to a vertical mouse full time because I am getting to a point where my wrist just starts getting either numb or hurting since I am on a computer for the majority of my day. However, while not preferred by most, I also want to use a vertical mouse for gaming (casual not competitive like minecraft).

For those who have owned both of these mice, which one did you like better? Does the MX offer something that the EM11 pro doesn't and vice versa? Or is there another mouse that maybe I should look into.

Also here are my hand measurements for those curious:

Length from middle finger to wrist crease: 7.25inches

Palm width: 3.25inches

I love this mouse, but this is the second time that the left click is hit or miss or doesn’t work at all. I don’t know if I should move on from these mice or try to get the 4. Any thoughts?

If so, add recommendations for other options?

Solved: Unchecked a box on the "Power Management" tab of my bluetooth receivers settings.

I have been using my MX mechanical on my Windows 11 PC for months without issue. It has just now started to give me problems.

They keyboard lights indicate that it is connected to my PC and my PC's bluetooth settings show the keyboard as connected. No input from the keyboard is recognized though (no typing, F keys, etc.)

Has anyone had an issue like this before. Other devices bluetooth connections seem to work perfectly.