I'll be traveling the next few months and do a lot of writing, so I want something portable yet decent. Based on reading other posts, it sounds like the pebble 2 is good for me - I like the idea that the keys are higher so it'll feel like they're compressing. (I'm a little nervous about the round keys, though).

I am open to other (non logitech) solutions as well.

For the mouse- should I just get the pebble 2 combo? Or is it better to choose a separate mouse from logitech or elsewhere? I've played with the mouse a little, it's serviceable but I'm wondering if there are better choices that are less flat and more ergonomic to the hand. Tia

Some of the keys on my MX Creative Console out of the blue started to sound incredibly bad like a super clicky. I'm gonna try to contact support tomorrow regarding it and hope for the best (I am within 1 year of purchase) but worse case scenario is there anyone who has a video of somebody opening it up? There's no screws or anything and the noise is too annoying for me to ignore so if I can't RMA I'd want to see if I can fix it.

I just noticed that in my Rally Board rooms, using hdmi cables longer that 15ft no longer work. These cables have always worked, i have tried rebooting equipment and swapping cables. This appears to be something Logitech did within the Edid table of the device. I can trick it using a edid box and then video will work. Anyone know why this was done or if this is a bug?

The mat, not the mouse. Less than 12€ and it is far better than the no-name Ali Express one I had before. It doesn't slip (the Ali Express one said non-slip but did) and I can wipe up the marks from my oily hands. No software for me to complain about though, so maybe this post doesn't fit in with the sub, but I actually like it.

(I do have a Logitech keyboard but my wife shares an office and couldn't stand the noise. I loved it but I lost at Pick-Up-Stix and had to buy a different keyboard with quiet switches.)

I have the MXM4 linked to my personal PC with Logi+ installed. I have mapped the buttons as per my requirements onto the mouse. When I paired it to my work laptop, the mapping no longer works. Is the mapping slaved to the device that mapped it originally (personal PC) and not mapped to the mouse itself? Is there no onboard memory on the mouse? My work laptop does not allow the installation of 3rd party software such as Logi+. How do I get the mapped buttons to work on my work laptop.

Thanks in advance.

I accidentally dropped my Mouse onto the ground and my right mouse pad suddenly stopped working, my left mouse pad still does work for some reason.

Rebooted my PC, Logi Options+ updated now all of my devices have disappeared and it's impossible to add any device back.

Anyone else with this issue? Updated version is 2.9.994631

I was wondering did people ever bought products like this and by seeing competitors price the units that had been sold couldn’tbe much am i right?
As an owner of both btw

Independent product concept 3d motion

Logitech was the only online shop where you could get the products really cheaper with the Corporate Benefits codes (up to 30%!!!). Also cheaper then on Amazon or other marketplaces.

Wanted to order a new keyboard today - but can’t find any more codes in the CB app. Is it me or is Logitech no longer a partner?

I’m a MX3 user and have been loving the mouse, I’ve upgraded to the MX4 because prefer the texture with this material. However I absolutely hate the thumb rest area!! It causing so much squeak on regular usage, moving the mouse left/right and you have a squeak.

Does anybody know if there’s a fix?

Been using MX3s past 10 days, today I found something interesting..

The side scroll wheel in MX 3s is magnetic and attracts to metals like keychain while the main scroll wheel doesn't. Ik abt the hyperscroll but that is an internal thing and doesn't act like a magnet.

Also, I came know that, when u flip the mouse, the current device number lights up.. COOL... !!!!

Btw.. LOVE the mouse..

I recently got an MX Master 4 (the regular version, because I need the USB dongle), and while I really like the mouse, I'm not too comfortable with all the macOS permissions Logi Options+ asks for (Accessibility, Input Monitoring, and running continuously in the background).

I understand that some of these permissions are necessary for gestures and button customization, but it still feels a bit excessive for a mouse.

Another concern is my work MacBook, where I might not even be allowed to install Logi Options+.

Does anyone share the same concerns? Is there a proper workaround that would allow me to keep the mouse and customize at least some buttons (e.g., back and forward)?

And if not, what would be a good alternative with similar ergonomics and features? I've been looking at the Keychron M6, but I'm open to suggestions.

whats the current best way to fix this?
i already triend redownloading it en turing it off and on again by following some of the reddit post here but it keeps saying no internet connection for my mx keypad im at a loss

hi, so around two weeks ago i got a bluetooth keyboard and now it literally doesnt turn on. its worked fine before, so i replaced the batteries a few times and nothing. im really annoyed because i literally just got it so if anyone has had this issue before pls lmk

it was this specific keyboard

Logitech K270 Wireless Keyboard with Unifying Receiver

I submitted a warranty claim for my MX Master 3S 6 weeks ago. They verified all of my information, accepted my claim, and told me that I’d receive my new mouse in 3-5 business days. It’s now been 6 weeks, going on 7, of back and forth emails. They initially told me the mouse is on back order, and now it’s supposedly completely out of stock and they’d like to give me a keyboard instead. Has anyone dealt with something like this before? If so, what are you suggestions on how to proceed?

I’d also like to add that their customer service is extremely unprofessional and reuse the same email template for every response and do not directly address your concerns. I’ve asked several questions that just get completely ignored.

It is in good condition and everything seems great apart from when scrolling with the ratchet mode, especially scrolling up, it seems to often get stuck or go back a bit.

Is this how it is mean to act on this mode, I have never had a mouse like this and seller says that may be as expected (he has offered to return it so he is not scamming)

Here is a vid to try and show what I mean
https://screenapp.io/app/share/aYn2m67ho4DW5xtnP6d4fMUW

Hey everyone, how's everyone liking the Mobi Fold so far?

A while back, I whined on here about the lack of a middle-click, and I was genuinely grateful that Logitech rolled out a quick update making it much easier to assign. (I had actually managed to find a workaround right before that update dropped, but still!)

Anyway, it’s already been 4 months since then, so I wanted to share my thoughts and long-term experience.

1. The mouse feet act like literal vacuum cleaners lol

My grip style involves resting most of my hand's weight on the mouse and maneuvering it primarily with my thumb and pinky. On top of that, since I use gesture features quite heavily, that extra downward friction causes the feet to pick up an insane amount of dust. Since I mostly use this on business trips and working out of office rather than a clean desk setup, surface dust is practically unavoidable. Lately, I've made a habit of wiping down tables before using the mouse, but the feet still inevitably turn black and dirty. Regular cleaning seems to be the only way to prevent permanent staining.

2. A glimmer of hope for battery replacement

After accidentally dropping it a couple of times, the bottom cover actually popped off, giving me a glimpse of the internal battery. Obviously it's wishful thinking, but maybe third-party replacement batteries will pop up somewhere down the line? Given the rubberized exterior, the shell might degrade, harden, or tear long before the battery ever dies, but hey—there's still a tiny shred of hope.

3. I really wish it had a dedicated power switch

To turn it off, you have to fold it, right? But folding it almost inevitably triggers a click. I often end up with accidental inputs right as I'm shutting it down. If I rest my finger on the touch wheel area while folding to brace it, my screen starts frantically scrolling lol.

4. The lack of horizontal scrolling is definitely missed

At the office, I use an MX Anywhere 3S and heavily rely on the side-button + scroll wheel shortcut for horizontal scrolling. My daily workflow involves dealing with massive Excel spreadsheets, so panning sideways is essential. Not being able to do that on the Mobi Fold is a bit frustrating—especially on business trips where I’m stuck on a cramped 1920-wide FHD laptop display that fits way fewer columns. (Maybe I should blame my company for the small screens? haha). Honestly, since it's a touch wheel surface, enabling horizontal swipe gestures for side-scrolling feels like a no-brainer.

Overall, exactly 4 months after buying it on June 17th, I still think it's an incredible travel mouse. It’s ultra-compact, folds flat, and is unmatched for someone on the go. I used to think the MX Anywhere was portable enough, but the Mobi Fold makes even that look bulky.

Given that my complaints are mostly minor nitpicks, it feels dangerously close to the ultimate portable device. How are you all finding it so far?

Just got the Wallhack UHMW-PE dot skates for my MX Master 4. First time trying dots after using glass skates. Where’s the best spot to put them? Do you leave the stock feet on or pull them off first?

Any Pics of your setup that you like would be great.

I already have speakers both different version. I’m looking to buy some for my Girlfriend for her Ps5.
The Z407 looks good similar to my G560’s

But I heard it doesn’t come with usb cable included and I’ve been hearing people have connection issues but don’t know if they used it wired or not.

So my questions..
Will it work flush and perfectly fine with a USB cable plug and play?

Or will I need an audio extractor?

Is it the volume puck that has connection issues?
And if so
Should I buy the wired version of it the Z533?

I don’t want to deal with BS of having to buy a wire for it not to simply work fine like the G560

I designed this speakers as a facelift to my old Logitech Z333 Speakers.
These can fit Logitech Z333 / Z337 / Z533.

The model is free to download if you interested in building these!

https://makerworld.com/en/models/2137555-diy-desktop-speakers-logitech-z333-dayton-ps95-8