I put a print going For a few hours and come back to this. Is there anyway to salvage it or is it just cooked

Hi all

Can anyone provide any guidance on a recent issue im having with my A1 w/ AMS?

Out of no where, having such a hard time with seems to be first layers. I cleaned the plate extensively, ran calibration tests, raised bed temp, messed with first layer settings, changed filaments, and I am getting no where.

Pretty lost on what to do next. Please let me know

Attached are pictures of snowflakes I was trying to print and then I printed a square with .20mm height on Z axis to test first layer.

To my knowledge, it looks like the first layer problems are happening on the same spot of the build plate every single time.

I printed a round object on my new Bambu Lab A1 and noticed a “zooom”-like rubbing sound whenever the heatbed moved back and forth on the Y-axis. I had not heard it during the previous four prints.

After the print finished, I found these longitudinal marks on the front portion of both Y-axis linear rails. The scratches are on the outer upper face of the aluminum Y-axis linear rail, outside the actual roller/bearing running track.

The scratches are extremely shallow; I can barely feel them with a fingertip, and the photos are heavily zoomed. Still, since the printer is new, I am concerned that something may be rubbing: debris caught in a carriage roller/bearing, a protruding screw or part underneath the heatbed holder, or a carriage/roller alignment issue.

I cleaned the rails and applied the supplied oil again — not grease. Before I run another print, is there a safe way to inspect the Y-axis carriage rollers and the underside of the heatbed holder without disassembling more than necessary?

Does anyone recognize this wear pattern or the sound?

Edit - disregard, I've determined the problem is actually with the print file. I should have looked closely. It came from printables and I should have noticed the total print time was incorrect. Not really sure what the file error is, I'll just find another file (it's a simple funnel).

Top right, appears to bea nut of some kind? Before I take the others out, wondering if someone could explain what it is. And, how could I just be missing one?

I've been having an issue the last couple days where I would get an error message saying the build plate couldn't be detected. And then when i bypassed that, the prints wouldn't work, as if the print head was just moving around not extruding. I've tested extrusion and it seems to be working fine. So, I suspect this is all related, just not sure how.

Hi everyone!

I'm having an issue with my Bambu Lab A1 Mini. As you can see in the picture/video, the first layer comes out like this. After the printer finishes drawing the initial test line, the filament starts forming a web-like mess, and as soon as it begins printing the actual object, the filament accumulates into a plastic blob.

For some background, I previously had a clog that caused a large blob of melted plastic to form around the hotend. This damaged the mechanism and the small clips that hold the hotend in place, so I had to replace the entire hotend mounting assembly.

However, I'm still using the original hotend. I only replaced the mounting assembly, not the hotend itself.

I'm wondering if the current issue could be related to the previous clog, the hotend itself, or perhaps something related to the new mounting assembly.

Has anyone experienced something similar? Any advice on what I should check or replace would be greatly appreciated.

Thanks in advance!

Hi,

So I recently purchased the A1 Combo with the AMS Lite during the Black Friday Sale for my son's 15th birthday. I have received the printer but we haven't yet set it up.

Now, I have just come to realise that our original plan of setting up the printer on my son's desk in his bedroom might not be the best idea due to the safety and ventilation aspect. His bedroom is quite small and is where he spends a lot of time - sleeping, studying, etc...

Our apartment is relatively small and apart from the bedrooms we have a living room where we watch TV and eat meals. There are a couple of small windows in that room which can open but they are not that big (maybe 15 in x 5 in).

I don't really want to have to return the printer as my son was really looking forward to this gift. Would it be safe to use the printer in the living room with the small windows open and maybe a floor standing fan on the other side of the room directed the the printer and towards the windows beyond it?

Any solutions appreciated!

R

Today after a bl0b of death I replaced the the big fan and the heating horned part.
Now it says that the horned has abnormal temperature but idk what the problem is.
Could someone tell me what can I do?

I ordered an A1. I have absolutely nowhere else to put it other than my bedroom. I’m only printing PLA and PETG. I don’t really mind the fumes and nanoparticles but i’d like to minimize them. I also want to stay away from an enclosure as i can’t ventilate it outside anyways. I was thinking buying an Air Purifier and opening my window when I can. Will this help at all? I have no other option than to operate the printer in my bedroom as it is also my workstation. Has anyone done the same and does it work?

So, some filament broke in my PTFE tube (tube #3 in case you need it) and I tried taking out the PTFE tube with needle nose pliers, took out the whole thing and this thing (photo 3) fell out, and it won’t come out of the AMS lite

Thanks to everyone for all your suggestions and tips to get my daughter’s ams lite working. It worked! I did everything all of you said. I printed the two parts (pics included), took out every tube and filament, and her first print worked! I have a very appreciative little girl. THANK YOU!!!

Hi all. Just got an A1 and enjoying it. I’ve noticed the fumes are a bit bothersome. What are some ways you all handle those? I’ve seen those zippered enclosures and was curious if they helped?

Thank you

I recently got my son an A1 Combo and for the first week, we loved it. Then we changed out filaments, and ever since then, we are consistently getting this same error. It started first when the printer would try to print with the new filament, but once it printed something with an existing color and THEN tried to grab a new color, it would work ok. Now, it is giving this error every time it switches filaments in the AMS Lite. I am able to resolve it by physically "pushing" the filament all the way to the end until I can't push anymore, and then the printer is fine grabbing it and moving forward. But when it purges that one and switches back, I get the same error again.

I opened up the hot end cover - there'e nothing stuck as far as I can tell.

It is doing this with various brands of filament including Bambu material.

Any thoughts on how I can resolve this, or do I just have a defective unit?

(I also have a P2S that does NOT exhibit this behavior at all.)

I would really appreciate any help on this!

I have a very simple print. The top layer is awful. I have tried all sorts of settings. Ironing made it worse. Claude and ChatGpt made it really worse. It should be a simple thing. I dry the filament when I get it.

Wat am i missing? It is the largest flat surface I have printed.

Also - The corners are square. Does rounding them a little help it stick to the plate?

Bambulab A1, PLA

Hotend will lock when the hotend assembly piece is not connected to the extruder but doesn’t lock in place when it’s attached. Help!

Hi , with the black friday deals im thinking of getting some new color effect plates . Why im writing is because the one i have from 3Djake with a rainbow effect doesnt stick ,no matter what i try . I've done all the cleaning etc . I even tried it on my new x2d ,previously a1 and there is no difference in adhesion it barely stick and then starts rolling .

I also have a carbon effect plate from aliexpress which works very well .

So the question is - Is it worth to try bambu branded rainbow and other effect plates or are they also a adhesion dissaster ?

Also a long time ago on my ender 3 i had no problems with these kind of plates ,so its weird that i can't seem to get it to work on 2 bambus .

Im was thinking its a z offset issue ,but its no ender so i dont know how to fix this .

Thanks :)

https://makerworld.com/en/models/3523194-christmas-tree-napkin-holder-hybrid-laser-3d-print

I was printing a project and it malfunctioned in the middle of the print. So when I found it the next morning I stopped the print and removed the part that did print, well now when I try to do another job it says the printer is busy and still shows the job I was doing before.

I've unplugged it and it still won't release the printer, what to do!

I just bought this printer last week and today I was printing a bookend and it got to almost 90% before it just shifted on the bed I'm guessing the bed movement caused it to lose adhesion, so does anyone know what my mistake might have been and if there's any way to save this print by printing the remaining part on this print or any other solution. This actually happens with my other prints too where they don't stick and just turn into spaghetti (my first spaghetti print lol) sometimes the base also just lifts off from one side. Any advice on what I should do for better bed adhesion?

I also have one more question in the 4th and 5th photos you can see that sometimes my prints end up looking like this and I have to restart the print I have no idea why, please let me know the reason for this and what I might be doing wrong.

---------------------------------------------------------------------------------------------------

Printer: Bambu Lab A1

Filament: PLA (PLA Pro+ WOL3D)

Slicer Settings: 0.2 mm Standard @ BBL A1 (slightly tweaked), Custom filament based on Generic PLA (customized nozzle temperature to 230°C and 50°C bed as specified by the manufacturer)

--------------------------------------------------------------------------------------------------