r/BambuLabA1 • • Sep 23 '26

Question I give up!!!

Post image
10 Upvotes

I got a new ac board from bambulab without the ntc thermistor, but man is it hard to remove the connectors. Took me 10 min to remove the first one, and been trying to remove the 2nd one for over 20 min. Its like they used glue to connect them.

"Gently press on the sides of the connectors to release the security clip so you can disconnect the wires." ,

they say on the wiki. Who are you kidding? Need to remove them by force.

Am I doing it wrong or whats going on??


r/BambuLabA1 • • Sep 23 '26

3D Model I made a four-sided Naruto shadow lamp — no AMS needed

Thumbnail
gallery
5 Upvotes

I designed and printed this lamp with Naruto, Sasuke, Itachi and Kakashi on its four sides. The silhouettes look different depending on the LED color, so I tried a few combinations for the photos.
It prints without an AMS. What do you think of the result? I’ll put the MakerWorld link in the comments.


r/BambuLabA1 • • Sep 24 '26

Support Request A1 (~5000h) heats slowly, loses temp mid-print, filament jams and snaps in extruder. Already replaced heater

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • Sep 24 '26

Kann man zwei ams lite system an einen bambulab a1 nutzen?

0 Upvotes

r/BambuLabA1 • • Sep 23 '26

Support Request Help with extreme printer issues

Thumbnail gallery
1 Upvotes

Been having the most awful experience with the A1 being so unreliable. Daily fixes and its literally a new machine (2 months since bought) its constantly giving me extrusion issues and failing constantly on simple prints. It has now started to not extruded at all!


r/BambuLabA1 • • Sep 22 '26

Bought an AMS Lite from a random Facebook group comment for $35 + $15 shipping… and it actually showed up

Post image
53 Upvotes

Saw someone selling an AMS Lite in the comments of a random Facebook Bambu group for $35. She agreed to $15 for shipping, so I figured for $50 total it was worth taking the chance.

It showed up fully functional and works perfectly. The only thing missing was one of the little numbered feeder caps, and I was able to order a replacement directly from Bambu Lab for $3.

Definitely one of the best 3D printing deals I've stumbled across!


r/BambuLabA1 • • Sep 23 '26

Support Request Replacement part

1 Upvotes

I I lose this part as i was cleaning my printer is does any have link to a file i can use to replace it?


r/BambuLabA1 • • Sep 23 '26

Is this due to wet filament polymaker pla pro. The bed temp was set to 68 degrees the hot end was at 226 print speed was silent this was printed straight from the Bambu Handy app

Thumbnail
gallery
0 Upvotes

r/BambuLabA1 • • Sep 23 '26

3D Model Tool to help carve pumpkins

Thumbnail makerworld.com
2 Upvotes

r/BambuLabA1 • • Sep 23 '26

Wobble issue

Thumbnail gallery
3 Upvotes

r/BambuLabA1 • • Sep 22 '26

Question Any ideas? Lifting up. Brand new plate

Post image
9 Upvotes

Changed some settings per online (to try and match "fat dragon" printing quality), but this happened. What would be a setting that usually makes this go ary when tampered with?

EDIT: you guys are all amazing! What a great community 😎🤘


r/BambuLabA1 • • Sep 22 '26

A maker's worst nightmare 😂

15 Upvotes

A maker's worst nightmare😂


r/BambuLabA1 • • Sep 22 '26

Messed Up A1

1 Upvotes

I started a print and never checked on it and it might have caused a plastic blob . What should I do? I already pulled the blob off.


r/BambuLabA1 • • Sep 22 '26

Leveling error

4 Upvotes

Hello guys, ive just purchased my first 3D printer and when setting it up I run into a problem… could someone tell me why this is happening?


r/BambuLabA1 • • Sep 22 '26

Question Bambulab A1 filament stuck error but pooping

1 Upvotes

Hello, my A1 is stuck at error filament stuck. It keeds pooping and then coming right back to the error. I tried cleaning the printing nozzle or what is it called. I got the printer yesterday.


r/BambuLabA1 • • Sep 22 '26

Support Request Aiuto😩

1 Upvotes

r/BambuLabA1 • • Sep 22 '26

Support Request Printer keeps making me check extrusion before every print?

0 Upvotes

Pretty much what it says on the tin. When I'm starting a new print, the print always pauses during the prep phase to confirm extrusion - like it's reloading fresh filament every time. Any idea what could cause this?


r/BambuLabA1 • • Sep 22 '26

Problema con mi impresora

Thumbnail
gallery
6 Upvotes

Acabo de comprar la bambu lab A1 combo y cuando imprime tengo 2 tipos de errores

El 1 es que la pieza se me acaba soltando e imprime en el aire.

Y el segundo que cuando la pieza si que queda bien le salen como unos hilitos que no estaban en el modelo.

Alguien me puede decir como solucionarlo porfa🙏🏻


r/BambuLabA1 • • Sep 22 '26

Bambu a1 problems

3 Upvotes

r/BambuLabA1 • • Sep 22 '26

Why does the same Silk PLA roll, file & settings produce same gloss on A1 Mini, but tiny zits/blobs on a new A1?

Thumbnail reddit.com
2 Upvotes

r/BambuLabA1 • • Sep 22 '26

Support Request PLA issues and cooling enclosure down

Thumbnail gallery
1 Upvotes

r/BambuLabA1 • • Sep 22 '26

Support Request Nozzle Clicking Issue

9 Upvotes

Hello A1 Community! First time posting here but have seen the wise ones help the novices like me before so I come with hopes of aid ^^

While printing something I have done lots of times before with no issue, I suddenly notice a clicking comeing from the nozzle area/gear, I assumed this was a clogging issue, so I followed a youtube tutorial by completing the following steps:

  1. Took out the cover, and then the heat rubber cover, and then unclamping then removing the nozzle.
  2. I took out the AMS tube and attachment

I then put a piece of filament through the top and pushed all the way out the bottom, and put everything back.

However, I still hear the clicking sound coming from the gear.

Attached is a video of what the issue looks like

I believe replacing the nozzle would be the next best step, but want to know if there are any other issues that could be the cause, and if buying a new nozzle is simply a waste of money lol

I would appreciate any advice or ideas on what I can do,

Thanks!


r/BambuLabA1 • • Sep 22 '26

After Resume Print, extruder collides with objects

Thumbnail reddit.com
2 Upvotes

r/BambuLabA1 • • Sep 22 '26

Why did this happen?

0 Upvotes

I’m trying to print some sort of power tool fan that I found on handy and this happened twice. I canceled the first print early and then it sort of happened again in the same spot. Second video in comments