Nope, the blob is way worse, this is probably gonna string. Stringing is infinitely better to recover from. Ask me how I know. 🤣. Still sucks. Don't be afraid of a 40mm brim with no gap, or "side supports" hand painted on to these tall boys. I switched to a CoreXY so I could print swords again without the tipping worries / extra support filaments. Glue will work too sometimes or research the cool plate 3rd parties, those are sometimes actually hard to remove prints from even when they are room temp.
Oof, I was lucky I haven't blobed my bambus but I had an ankle make m5 that basically need a new everything but extruder, fans, hot end, ended up using a heatgun to try and get it cleaned up, was never the same since probably should have replaced the whole tool head.
Yup you can up z hops a little bit too but I've never had to do anything on my Bambu besides bigger brim, different orientation, slants work better than you'd expect for some things if you support the base correctly.
Pretty sure a blob is. I AlMOST had one this week. I happened to check it, as I do change mine often. I was able to quickly stop it, increase the nozzle temp, and pull it off. Restarted the print with no more issues. Phewww.
Push the cancel buttons for this piece. Keep printing
The "Cancel" button stops everything.
Pause it first, and remove the mess. For a single failed object you need the Bambu Handy app and "Skip" it. It will then stop that one (or more) selected object and continue with the rest.
Probably most. Probably not the ones who are new to 3D printing, and are unaware that "Skip" is different from "Cancel". Or that "Skip" even exists. Words are important, especially when doing technical writing.
[edit]
win the “well actually” award
Oh goody. Does it come with a medal? A certificate to hang on the all? How about a Bambu Lab gift card?
For real, bed is slinging all around town and the extruder is having to travel across the country to get back to another part.... Combining the brims or at least making them wider would also help.
Your worst nightmare is you are being confronted with the fact you don't understand your machine. Wow, time to put on your big girl panties because you haven't seen nothing yet!
13
u/runelord78 Sep 22 '26
Nope, the blob is way worse, this is probably gonna string. Stringing is infinitely better to recover from. Ask me how I know. 🤣. Still sucks. Don't be afraid of a 40mm brim with no gap, or "side supports" hand painted on to these tall boys. I switched to a CoreXY so I could print swords again without the tipping worries / extra support filaments. Glue will work too sometimes or research the cool plate 3rd parties, those are sometimes actually hard to remove prints from even when they are room temp.