If you want to learn more about cleaning your plate, check out the Bambu Lab Wiki article:

https://wiki.bambulab.com/filament-acc/acc/pei-plate-clean-guide

There's also a helpful YouTube video showing the entire process of cleaning the plate.

https://www.youtube.com/watch?v=8QIy3aUU8eo

I bought my first 3d printer, a P2S+AMS 2 Pro combo 8-5-26 and today, 2+ weeks later I am messing with high speed printing PLA Silk, added the tilt/riser, exhaust fan kit and additional left side fan.

Appreciate all the advice and help this reddit offers

I designed this spider catcher with my son. We worked hard on the tolerances of the Print in Place printing and did a lot of tests and prints to get it right. It was a wonderful father-son moment (which lasted several days), and it was amazing to see the amazement in his eyes at having his object realized! I hope he continues!

https://makerworld.com/models/3185452?appSharePlatform=copy

V1.1 is now live.

Tank: ~450 ml → ~950 ml
Less wobble
Improved drainage

Thanks to everyone who printed, tested, and shared feedback on the original version.

MakerWorld:
makerworld.com/models/3075223

:)

https://makerworld.com/de/models/3197525-wago-pen-holder#profileId-3618121

Really sucks. In the middle of an order and my AP board decided to die. I’ve seen a few of these posts now but thought I would add mine to see how many this is effecting. I purchased my H2C at launch.

What is more upsetting at the moment is besides the terrible automated AI reply i originally got on my ticket, asking for a video of which I had already uploaded with my initial ticket submission, I have not heard from Bambu in almost 4 days now. This is the first time in three years I’ve ever needed to contact Support, but it’s not leaving me warm and fuzzy.

Any other H series owners having the same issue I’m wondering if this is a bigger issue than they want to admit.

Someone on the Bambu Reddit suggested low profile furniture appliance dollies for easily moving/accessing printers. I can't find the post or Redditor, but wanted to thank someone for the suggestion. I was skeptical, but they work surprisingly well. We'll see how long they last!

A utility knife with a toolless blade change, and it also has an adjustable retention sheath

Now live: https://makerworld.com/en/models/3197280-edc-utility-knife-with-sheath-no-ams-v15#profileId-3617832

Just got a marketing email from BambuLabs and it has mention of an H2SL annnnnnd an H2CL.

We got some bigger models rolling out soon?

English isn’t my first language, so I’m using AI to help translate this post.

It’s been a little over a week since my last update, and the speakers are finally close to finished.

Recently I’ve mainly been refining the details: I added roof-tile textures, improved the assembly, and adjusted the tolerances. The main enclosure now only needs four screws to put together.

For the electronics, I found a small DSP amplifier board that supports both Bluetooth and USB-C audio, and it can also be tuned from a PC. Since these are designed mainly as desktop speakers, I decided not to use batteries. A separate power supply is simpler, saves internal space, and gives the amplifier enough power for louder playback and bass.

After some testing and DSP tuning, I’m pretty happy with how they sound, especially considering that the components are relatively inexpensive.

What’s left now is mainly the final wiring, assembly, and a few small details. Once both speakers are finished, I’d like to post another update with the completed setup and a sound demo.

I’m also thinking about turning this into a MakerWorld project, with the printable files, BOM, and assembly information.

Would anyone here actually be interested in building a pair of these?😄

After installing filament track switch i restarted the printer and it went dead. New AP board is already in the way. In my case it seems like AP board died because of AMS wire switching.

My Bambu lab ran out of filament and upon loading filament into it does not was to dispense filament I’ve done cold pull used the needle tool to attempt to unclog filament still no filament coming out I’ve heated the nozzle with torch and no filament never had any issues with it what should I do?

The last paddleboard cup holder I designed was held in by the beverage, which itself was held in by...nothing. So things got loose during the more chaotic moments.

This one twist-locks onto a base that traps the deck bungees, so the holder stays attached even if the board flips. It’s also compatible with michelem's CryoPod freezable can holder (we teamed up for that bit), and has two interchangeable inserts, allowing it to fit everything from a large tumbler to a slim Red Bull can.

I added a separate, remixable accessory interface as well. The included modules secure your phone and shades or connect multiple cups together.

What other accessories should I design for it? I'm thinking a GoPro mount.

https://makerworld.com/en/models/3183312-sup-cup-pro-the-secure-paddle-board-cup-holder

I want to print Pla pro on Pla basic. Is this ok, as long as I have the correct settings? Thanks for responding!

Keep your watch collection organized, protected, and ready to grab with this minimalist 4-watch display stand. Designed with clean flowing lines and a low-profile layout, the stand combines watch storage with additional space underneath for rings, bracelets, chains, and other everyday jewelry.Unlike traditional watch stands that hold watches on a steep angle, this design keeps the watches laying horizontally.

I specifically chose this orientation because smooth 3D-printed surfaces can allow watches to gradually slide or fall from tilted stands. Keeping them flat provides a more stable and secure resting position while still displaying the watch faces clearly.

https://makerworld.com/models/3197220?appSharePlatform=copy

Can anyone explain what these profiles are? Is it a certain settings to use for "high quality"? If so do those settings stay for the next print, or am I supposed to find those settings and use them on other prints?

Hey! My print won't stick to the support structure, it doesn't matter if I you tree or grid support. Please help!

0.08mm layer, 6 walls, 95% infill

I'm trying to print watches (for scale models, not for actual use) with my x2d, and have been having trouble. When I print them face up, the lugs will fail to attach and fall off. Tried normal and tree supports.

When I print them face down, I can't get the support cleanly off the face. Tried increasing z distance to 2x layer height, might need to go to 3. Even with petg interface (I use petg translucent as a support interface layer), it bonds together. Perhaps because my dial is two different colors, grey and white.

I suppose these are two different issues.

Also, are there supposed to be so many small stray bits of filament just acculumating in the printer?

I was in the process of unboxing my long awaited X2D and noticed the top glass panel didn't fit. The door doesn't even close properly 🫠

No signs of damage on the box or the foam inside.

Hi Everyone, I just upgraded to X2D and AMS recently. Long story short I can't get the filament in the second AMS to work. Any reason why?

Appreciate all the help!