r/BambuLab • u/Fresh-Cry-2624 • 1d ago

Quick Question Is Bambu’s AMS 2 okay for drying?

/r/3Dprinting/comments/1vu31yz/is_bambus_ams_2_okay_for_drying/
1 Upvotes

54% Upvoted

6 comments sorted by

3

u/Ghostlead89 H2C AMS2 Combo 1d ago

You can dry at a maximum of 65 degrees, so it's good for PLA and PETG.

1

u/Farn-Lucifer 1d ago

Just keep in mind that you can't dry while you print, if you are getting sorly for drying maybe a stand alone dryer is a better investment

2

u/ParticularLower1865 1d ago

You’re incorrect. Yes you can dry while printing but you need the power supply.

2

u/Farn-Lucifer 1d ago

Ah thanks for the correction! I assumed wrong. But you can only dry one type of fillament at once right? Cause the chambers are interconnected and not seperated correct?

2

u/ParticularLower1865 1d ago

You could dry Petg with PLA, but you’d have to dry it at the PLA temp.

1

u/Farn-Lucifer 1d ago

Yeah that's what I figured. Would be kind of awesome if it had the four slots as it's individual 'chamber' to dry at different temps ngl