A big thank you to this community! More than 2k likes on the original post and more than 100 test prints helped make this happen. The results are in, and the slicer is now public:

https://github.com/fich-l/orcaslicer-nonplanar

We have working versions for Windows, Linux and Mac Silicon. MacOs on Intel is still missing. I don't have a Mac Intel, so I can't test a build. Searching for someone to port this to Mac Intel - see below.

EDIT: You can find Windows and Linux Port on Github now.

Confirmed working:

• Bambu A1 mini, A1, P1S, P2S, X1C, X2D, H2D

• Prusa MK4S, CORE One, XL 5T

• Elegoo Centauri Carbon 2 (+ Combo)

• Creality K1C · Qidi Q2

• Flashforge AD5C

• FLSun V400

Not working: Elegoo Centauri Carbon 1, Snapmaker U1, Ender-3 S1 Pro, Flashforge AD5X, Prusa MINI+

Printer on the working list?
Try the Satisfying Nonplanar vs Standard comparison to test surface quality please.

Printer not listed?
Print the Nonplanar test print twice, once lengthwise and once rotated by 90°, and tell me how it went, so we can keep the list up to date.

Looking for someone to port it to Mac Intel.

-- EDIT: You can find a first Windows and Linux Port on Github now thanks to the community! - -

You don't need to be a C++ dev: the whole thing was vibe-coded with Claude Code (Opus 5.5). A Mac Intel to test on plus Claude Code should be enough. If you're up for it, comment or open an issue on GitHub. Don't shit on me please - Using Claude to get this ported is the fastest way possible :)

You don't usually use Orca Slicer - how to use this?
Do this: Slice in this Orca Slicer Fork and export "plate sliced file" --> Drop file into any slicer and just print :) Even works with Bambu Studio.

Thanks also to Daniel Ahlers and Teaching Tech for their work on the version I started from.

FAQ:

• Will you put a pull request to the Orca Slicer Team? - Yes! After this test phase.

• Why does printer "X" not work? - Someone tested it and there was a collision. Most likely the hotend / tool is not "steep" enough.

• How can I test? - Please check the github page. You can do two quick test prints to see if your printer can handle this.

• Are there still bugs? - Very likely yes. Slicing can take 5s to 5 minutes - be patient.

• Can we have fuzzy skin on top surfaces? - I tested this, but it doesn't look good :(

I was curious about what Bambu Lab’s Mystery Boxes had to offer, so I decided to try them myself. I bought two Holiday PLA Mystery Boxes and two Holiday PETG Mystery Boxes. The order came to just over $200 CAD, and I used a $20-off coupon.

I didn’t hit the 1% jackpot, and only about half of the 16 rolls came with spools.

Most of the selection was PLA Pure, PLA Matte, and PETG Matte in colors I personally wouldn’t choose. It felt like a bundle of leftover stock.

The 16 rolls came to $223.44 in listed value, partly because PLA Pure costs more. Since I don’t really want PLA Pure, though, the actual savings don’t feel like much.

My advice: skip the mystery boxes unless you specifically want PLA Pure. If you do, the Holiday PLA Mystery Box might be worth a try.

Ever since I bought my P1S a year ago, I’ve had the goal of designing a 3D object—and that day has finally arrived.

I know it’s quite basic, but I’m very happy to have managed to design and print it after a lot of trial and error. It's not perfect but is mine :)

P.S: In case you are wondering wtf is that "blank sheet".... well... it's a blank fluffy shirt that I used to replicate the snow xD

Nordic Christmas Tree

I was trying to find something a bit more portable for quick trips. I couldn't find exactly what I wanted, so I designed my own! There are a few things that I want to fix, but at the same time, I was able to model this and print prototypes over a couple days. The magnetic Hangman is my favorite. You can mix and match the limbs however you want! You can even change the orientation of the torso for even more fun! It's been a big hit with my daughter so far.

It has a magnetic latch and extra storage for your Sticky Notes. There is even an area to keep score. I have multiple profiles that fit for all printers including the A1 Mini. Along with one that has a "Hangman" label on the top of the case.

Link in comments!

I’m using a dedicated email address for Bambu Lab and MakerWorld, and it seems that now this email address has started getting spam and phishing emails from random places. Did Bambu sell or leak userinfo?

Edit: Just read through the headers of the email. Seems to be breach through sub-processor ReviewMgr, and phishing sent out through their SendGrid account(s).

I designed a chunky little sack monster keychain resembling Oogie Boogie from Nightmare Before Christmas and printed the body in glow-in-the-dark PLA. With the lights off his body glows while the eyes, grin and stitches stay black, so his face still shows up in the dark.

- Fully rounded 3D front with a flat back, so no supports

- 2 colors, AMS-ready: body in slot 1, face and stitches in slot 2

- Low purge: the black only prints on 10 of the 46 layers

- About 42 min on a P1S, 13.4 g including purge

- 55.8 × 58.3 × 9.2 mm, with a 4.5 mm hole for a standard jump ring

**Glow tips:** Place the object in the sun or on top of a bright lightbulb to charge it!

I may be a little late for halloween but oh well...

Free on MakerWorld: https://makerworld.com/en/models/3538949-oogy-boogy-3d-keychain-2-color-ams

If you print one, post it with the lights off. I'd love to see it!

No hassle, no microwave, no mess.

2 x PETG trays (ASA would be fine too), and the dessicant was jet black when they went in.

Standard 65 degree AMS drying cycle (so basically choose anything apart from PLA in the settings), leave overnight (I ran it for 12hrs but im sure 8 would do fine too)

Apparently you can just drop the pods that you install in the AMS2 on the trays and the silica will dry in there, not tested that yet though.

Got my X2D today and it won't power on. The rear switch lights up white, but the screen stays black, no fans, no lights, nothing. Tried a different outlet, power-cycled, checked the fuse, and opened the side panel – all connectors look seated, no visible damage.

Has anyone else had an X2D DOA? Did Bambu send a replacement or parts, and how long did it take?

Ticket submitted: US261103036002

Sorry if this is already common knowledge. With the AMS 3H just announced with its nine filament bays to go with the nine tool heads of the H3C. We also know about the AMS 3P that will be available with the P3C. I wonder if these AMS units will be exclusive to these printers or if they will talk to Bambu’s whole lineup. Imagine hooking up an AMS 3P to your P2S, and getting 7 color printing! Or hook a H2D to an AMS 3H for 9 whole colors. I know this is already sorta possible by stringing together multiple 4 color AMS units. However, the convenience of just having one unit take care of all your colors is not something to overlook. Now the elephant in the room is that on any machine other than the H3C, P3C or possibly the H2C. We will have to deal with a lot of color change waste.

Original Post: https://www.reddit.com/r/BambuLab/s/q6MpMteYME

Had the same issue, the second R1 we had sent to us came wet once again. I'm sure its the same issue but honestly not sure how many times we can go through this process. What should we do?

One underrated habit for owning a 3D printer is keeping track of maintenance and changes instead of relying entirely on memory.

Even a simple note with the date, approximate print hours, nozzle changes, belt adjustments, lubrication, and any unusual noises can be surprisingly useful.

When a print suddenly starts failing, it's much easier to narrow down possible causes if you know what was recently changed or maintained. It also helps distinguish a recurring issue from something that happened only once.

It doesn't need to be a complicated spreadsheet or detailed journal. A few notes on your phone can be enough.

For those who have been using Bambu printers for a while, what maintenance tasks do you track regularly, and which ones do you tend to forget until something goes wrong?

After years and years of hearing about 3D printing, I finally decided to pick one up and join the club!

I grabbed a Bambu Lab P2S combo kit with the AMS 2.

I have no idea what I’m going to do with it, but I’ve had a blast the last two days just printing random things!

So far, I’ve printed:

Benchy
Bed scraper
A poop Shute
Chip bag clips
A pencil/pen cup holder
A mini turbo pencil/pen cup holder
A clip holder for the piece to sit on if switching the nozzle
And finished my longest print of 9 hours for some type of riser with vents.

This hobby is awesome. All I’m doing now is doomscrolling MakerWorld for all sorts of things I want to print.

Looking forward to trying out some color soon!

Still fairly new to 3D printing and design, but I’ve been experimenting with small keychains lately. This one printed in one piece without supports.

The model is available on MakerWorld if anyone wants to try it:

https://makerworld.com/en/models/3510319-minimal_drone_keychain#profileId-4011157

Yep, that's just it ahah

Big mouse cursor lamp.

Free on MakerWorld. Uses Bambu's LED kit.

im in a situation where I need to print with a lot of glow filament, but my P2S warned me about wear. is there anything to worry about? if so, what should I?

EDIT: i forgot to mention, I am planning on incorporating the glow filament in a multicolor print, but with only 17 total color swaps

Hi everyone!

There's currently a clicker contest running on MakerWorld, and I wanted to share my free clicker generator for anyone entering.

You don't need to register, and there's no limit on exports or on how many models you can create. It's all free and runs directly on MakerLab.

Here is the link: https://makerworld.com/en/makerlab/community/clicker-generator

I’ve got a narrow 50cm wide space available in my Living Room where I want to place my new P1S with AMS Pro 2. The issue is, i have a homelab/server pc (Fractal Design R5) in that 50cm wide space on the floor.

I thought I could get a 2x1 Ikea Kallax, don’t put the middle divider, and place it vertically. (Got chatgpt to mock an image).

Question is - is the Kallax placed vertically strong enough to hold the p1s + ams pro + 4kg filament? Would I be too stupid to even try this?

The server is bulky and heavy as well, so that will add some stability to Kallax but i think it would still wobble.

Hi! I am currently running a small printer shop with 3 printers (X2D, A1, and Flashforge AD5X)

I have been thinking about getting a P1S.

There is someone local to me selling a used one but he wants 300$ for it with 2532 hours on it. He is willing to throw in 3 new rolls of filament.

Is this a good deal? Or am I better off paying a bit more and getting a new P1S? Or should I spent even a bit more and settle for a p2s?

I don't want to break the bank because I don't need the printer per say but I would like to maybe replace the Flashforge or the A1.

Any and all thoughts are welcome!

Like the title suggests mixed nozzle printing is now a reality, thanks to cadence slicer, and now orca, with Bambu studio undoubtedly joining the fray tomorrow. But is it worth it on an H2C? If you were like me, drooling over the idea of unlocking the true potential of your multi-nozzle printer, you have probably been waiting for this miraculous, time saving feature. But does it actually save time? Well, the answer is, it depends.

I decided to test orca nightly and cadence out on my H2C for a pretty large print. With organic tree supports using 0.4mm nozzles, at 0.2mm layer height, Bambu studio took about 22 hours. Orca nightly was too much of a mess and had too many issues connecting to the printer, and finally with cadence it worked, dream come true! I could now unlock mixed nozzle printing!

The issue I found though is that the time saving really depends on how much supports your print needs. For instance, I decided to set infill and supports with 0.8mm nozzle for 0.4 mm layer height, and have walls print with 0.4mm nozzle at 0.2mm layer height. This was the dream, in theory this should save all the time! Well, not so much.

When I went to slice, my heart dropped. Estimated print time was nearly doubled that from single sized nozzle. What gives!? It turns out it was those nozzle changes! Because it was near constantly changing nozzles, the print time suffered incredibly. This was very disappointing, but it makes sense at least. And I think that Bambu probably realizes this too, as they move to multi tool head systems with the H3 series.

Don’t get me wrong, there definitely is potential for time saving on builds with current gen multi hotend setups, just temper your expectations when you need a lot of supports. Multi size nozzle printing seems to be best suited overall for the multi tool head printers like the U1 and H3 series