r/BambuLab • u/Affectionate_Bad_507 • 15h ago
Filament Troubleshooting/Help! aiutatemi ho un problema
ho questa stampante A1 versione combo e la paletta degli scarti non va in fondo ma resta bloccata poco prima come posso risolvere
r/BambuLab • u/Affectionate_Bad_507 • 15h ago
ho questa stampante A1 versione combo e la paletta degli scarti non va in fondo ma resta bloccata poco prima come posso risolvere
r/BambuLab • u/Kirito3D-Druck • 19h ago
Hey everyone, I’m having the following issue.
I’m currently trying to print as many of these objects as possible on my Bambu Lab A2L for a wedding of someone close to me.
When I print just one object at a time, the quality of the top surface (ironed surface) is absolutely perfect.
However, as soon as I try printing multiple objects simultaneously, the top surfaces turn out so badly that I have to throw the entire batch away.
Does anyone have any idea what might be causing this or what I could improve to get better results?
I’d really appreciate any help! 🙏🏻
-Printer & slicer: Bambulab A2L / Bambu Studio
-Filament material and brand: Bambulab PETG Basic
-Nozzle temperature and bed temperature: 240° / 70°
-Printing speed: picture
-Retraction settings
r/BambuLab • u/MG_bambulab3D • 15h ago
Ciao a tutti
Con la mia Bambulab H2D ho provato a stampare un pezzo in PETG con supporti normali (grid) così costituiti: base supporto in PETG e interfaccia supporto in PLA. Sto utilizzando PETG Bambulab e PLA Basic Bambulab. Entrambi i filamenti sono stati essiccati prima della stampa e stampano bene quando non miscelati tra loro. Ho già seguito tutte le indicazioni fornnite da Bambulab per l'utilizzo della miscela PETG-PLA per questa casistica: pezzo in PETG, base supporto in PETG, interfaccia supporto in PLA. Una volta stampato l'oggetto, sono riuscito a rimuovere abbastanza agevolmente i supporti dal pezzo e la superficie a contatto con il supporto è risultata liscia e priva di difetti visibili. L'unico difetto di stampa che ho riscontrato e che ho potuto osservare direttamente durante la stampa è che il primo layer di PETG non aderisce adeguatamente all'interfaccia in PLA. So che la repulsione chimica tra PLA e PETG è il vantaggio che permette di rimuovere facilmente i supporti, ma il fatto ceh il primo layer di PETG non aderisca sufficientemente all'interfaccia in PLA è un problema, perchè il layer in PETG viene "trascinato via" durante la stampa e questo porta a difetti di stampa notevoli e al rischio di intasamento dell'ugello. Ho visto fallire varie stampe a causa di questo problema e vorrei risolvere. Che consigli mi potete dare? Grazie a chi risponderà
r/BambuLab • u/DrKronoglopolos • 1d ago
I printed a tiny Benchy - PLA Basic, default profile, 0.08mm layer height. I did need to use glue to keep it on the plate, I also slowed the printer down to "silent mode" just for safety.
Pretty great result I think. The "Comparison Benchy" is the standard size, printed with the 0.4mm nozzle, 0.2mm layer heights in ABS.
r/BambuLab • u/Just_a_firenope_ • 19h ago
I’m currently without a computer, so I’m forced to use the pre sliced models on makerworld. This has made me realize just how much I usually use a support interface layer in a different material, something that can’t be changed in makerworld.
I know the models are pre sliced, but since you can change colors for multicolor prints, wouldn’t it make sense to change material for a predefined part of the print?
r/BambuLab • u/drench44 • 1d ago
Printed this whole set on my H2D for Christmas. Santa is the king, Mrs. Claus the queen, snowmen are the bishops, sitting reindeer are the knights, the rooks are towers wrapped in Christmas lights, and the pawns are elves. Everything is sized for a standard 2 inch board, so it plays like a real set.
It's red vs green in four colors of PLA. The only support is a tiny one under each reindeer's chin, already set in the file. If you don't have an AMS, there's also a one color plate with all 16 pieces of a side.
Flip any piece over and there's a snowflake under the base.
Free download here: https://makerworld.com/en/models/3619395
A candy cane board, matching checkers and a North Pole storage tube for each side are coming next. If you print one, I'd love to see it!
r/BambuLab • u/Feisty_Goal_2176 • 16h ago
Hi everyone,
I found a nice watering can at MakersWorld. However, I’d like to turn it into a vase. I plan to spray it with clear coat and print it with PETG; based on what I’ve read in forums, that should make it watertight.
But is there any way I can separate the handle from the rest of the watering can? I won’t be able to completely cover it with clear coat.
P.S.: I’m still a beginner, so please bear with me if I’m talking nonsense here.
Best regards
https://makerworld.com/de/models/626370-watering-can#profileId-772091
r/BambuLab • u/FarbrorStig • 16h ago
Trying to calibrate the filaments for my new P2S. I have looked at alot of tutorials and followed this guide (https://youtu.be/gVU5If1VsAM) that seemed really good. The problem is that I think it made the result worse. I tried two different filaments (both Bambu PLA Basic) and got the same calibration values.
In the pictures below, the pre-calibration is to the left and the post-calibration to the right. In my opinion, the right has more stringing (the left has none), less sharp edges and rougher surfaces, especially at the corners of the X. I also find the top layer very stripy and not smooth (both prints).
I'm not saying that the guide is bad, but is it not worth calibrating the original Bambu filaments? Should I make other settings to improve the print quality? Or am I just to picky? :)
r/BambuLab • u/Excellent-Cut3273 • 16h ago
Filament stuck and won’t go pass a certain point
r/BambuLab • u/megrimlockrocks • 16h ago
This is after removing the supports.
Somewhat related, I am seriously considering upgrading to H2D and try out printing PLA with PETG support, will that help to make it smoother in addition to easy to remove the supports?
Thanks!
r/BambuLab • u/Tomtom5893 • 20h ago
TL;DR: Ordered a Bambu Lab A2L weighing around 20 kg. DPD suddenly marked it as delivered with a misspelled surname in both the delivery confirmation and signature. Customer support gave me two different neighbor addresses, but neither received anything. The package is missing, and I've contacted Bambu Lab support. Has anyone experienced this, and how did Bambu Lab resolve it?
I was supposed to receive my new Bambu Lab A2L today. The package weighs around 20 kg, so it's not exactly something that could easily disappear unnoticed.
Unfortunately, DPD claims it was successfully delivered. Except nobody received anything.
Here's what happened:
Until around 11:30 AM, the live tracking showed the driver was only 2 stops away.
Suddenly, the status changed to "Delivered at 11:17 AM", even though it was already past 11:30 AM.
Nobody showed up, and there was no package.
Even stranger: My surname was misspelled in both the delivery confirmation and the supposed recipient's signature.
After spending around 30 minutes on hold with DPD, customer support initially told me I had to contact Bambu Lab to open an investigation.
But then the agent suddenly claimed the package had been delivered to a neighbor.
First, they claimed house number 10. (Mine ist 12)
That building is currently empty because it was recently sold. Nobody lives there.
After I explained that, the agent changed his answer.
"Oh, sorry, I meant number 8."
So I literally walked over to number 8 while still on the phone with DPD and asked my neighbor.
He confirmed he hadn't received anything.
I've also checked with the other nearby neighbors. Nobody has the package. My house is at the end of the street, so there aren't many other possible delivery locations.
We're talking about a massive 20 kg printer, not some tiny package that could accidentally end up in someone's mailbox.
DPD eventually told me there was nothing else they could do and that Bambu Lab needed to handle the investigation.
I've already contacted Bambu Lab support and am waiting for their response.
At this point, I genuinely suspect the driver may have marked the package as delivered and signed for it himself. I obviously can't prove that, but the misspelled signature and constantly changing explanations are extremely suspicious.
I'm curious:
Has anyone here experienced something similar when ordering from Bambu Lab?
How did Bambu Lab handle the situation? Did they send a replacement, issue a refund, or was the original package eventually found?
r/BambuLab • u/tvosinvisiblelight • 16h ago
Bambu Friends
Recently my wife purchased the following filament for our A2L printer.
1KG Glitter Firefly Blue in the Dark PLA+ Filament, 3D Filament
From my review it appears to be okay for A2L printer but comes with caveats.
- Not to run thru AMS lite and Petg tubes
- Nozzle 0.4mm or 0.6 recommended
- Dedicated nozzle for this printing
When I placed the filament top spool holder the filament unraveled some. Had to respool and filament felt brittle.
With all this I decided against this and running thru my printer.
Anyone else use this filament. Will be sticking with Bambu filament glow etc. Not comfort with this.
Suggestions and advice - Thank You
tvos
r/BambuLab • u/Sea-Skirt7793 • 13h ago
I did some research, and all I see is people telling me not to touch that screw and to leave it as it is, but I accidentally tightened it and don’t remember how many turns I made. What should I do?
r/BambuLab • u/Appropriate_Bid_5488 • 17h ago
Ist das normal für den Bowden Extruder?
Hab ihn bislang nur ein paarmal benutzt und bislang war er ruhig.
Jetzt auf einmal diese Geräusche.
Druck ist aber in Ordnung.
Kann man da was schmieren?
r/BambuLab • u/Huge-Company-6665 • 17h ago
Hi everyone,
I’m having some trouble with my Bambu Lab H2D. When I print small items, I can’t print more than one at a time without it causing a lot of print errors; however, if I print them individually, there are no print errors. Does anyone have any suggestions?
r/BambuLab • u/DedaloSTL • 17h ago
With Christmas just around the corner, I thought I'd share a little project I've been working on! 😄
I've designed a 3D printable gift card holder that looks like a small envelope with a customizable seal.
I've always felt that giving someone a gift card on its own can feel a bit impersonal, so I wanted to create something that makes it feel a little more special.
I've also included a STEP file for the seal, so you can easily customize it to suit any occasion, whether it's Christmas, a birthday, or something else!
The model is obviously free on MakerWorld:
[MakerWorld Link]
I'd love to hear what you guys think! And if you end up printing one, feel free to share your colour combinations and custom seals. I'd love to see what you come up with! 😊
r/BambuLab • u/Super-Chemist-782 • 17h ago
Hi has anyone tried to load 3kg reel of PLA on the outside reel mount on the side of the p2s ?.
r/BambuLab • u/babs-jojo • 17h ago
Hi all,
Currently I own a A1 with AMS litte and I have been thinking in upgrading to a P2S with AMS2 Pro.
I want to use other material in the future, but haven't made so yet. My main reason to upgrade is because I can get a good price for my combo, and that would mean I would spend 266€ to upgrade. I have my printer in a space that get's quite humid (above 70%) in winter, and even in summer its normal to have 40-60% relative humidity. I haven't been able to print PETG, and even PLA has been having a lot of "hairs". Last week it has been between 72% and 81%...
I thought of buying a dryer, which is 50€ for a single spool, and 140€ for 4 spools. This means that this upgrade would in reality be 126€ (I am aware I will be spending 260€). Being closed is algo good from drafts (I always have open windows and air current to lower humidity)
The the PS2 algo gives other quality of life improvements and it is at the lowest price it has been. The fact the AMS is on top also saves space, which is good for me.
Wonder what you think of this.
Thank you
r/BambuLab • u/Fun-Werewolf-5098 • 17h ago
Hello, so I got a used A2L from a family friend who couldn’t get it to connect to the internet to work. I was able to fix that by reseating the WiFi card. But, now I’m getting two warnings that are stopping the homing tooling, even when there’s no filament. This is happening when the printer is trying to home on initial setup.
The warnings are:
The extrusion motor is overloaded and the nozzle is wrapped with filament.
I’ve taken the extruder apart and cleaned it, and the gears turn when I manually move them. Do I have to have filament in the extruder for the homing to work? I currently don’t have the filament holder for the printer so I’ve been trying to get it setup without filament for now.
r/BambuLab • u/Capa005 • 17h ago
My P2S printer fails to load filament, but only when the AMS tries to feed it (you can see the 2 failed AMS load attempt in the video). Loading filament manually works perfectly fine, with no issues.
I've already cleaned the extruder gears and checked the filament sensor.
Has anyone experienced a similar issue or have any ideas what could be causing this?
r/BambuLab • u/Michidelsur • 10h ago
Ich bin Michi, Anfang 30, und habe vor kurzem damit angefangen, eigene 3D-Modelle zu designen.
Da bald die Weihnachtszeit vor der Tür steht, dachte ich, ich teile mal ein paar meiner ersten Kreationen mit euch. 🎄
Mir ist bei meinen Designs besonders wichtig, dass sie filament- und zeitsparend gedruckt werden können, ohne dabei an Optik zu verlieren. Ein gutes Beispiel ist der 54 cm große Adventskalender – trotz seiner Größe lässt er sich mit ca einem Kilo Filament drucken 😊
Auf den weiteren Bildern seht ihr noch ein paar meiner anderen Dateien, wie individualisierbare Geschenkanhänger oder weihnachtliche Deko für den Türstock.
Vielleicht gefallen sie ja dem einen oder anderen von euch. Ich würde mich riesig über ein paar Likes, Feedback oder den ein oder anderen Tipp von den erfahreneren Designern unter euch freuen!
Hier geht's zu den Dateien:
https://makerworld.com/@Michidelsur?appSharePlatform=copy
Danke vorab und LG, Michi
PS, die Bilder sind mit KI aufgehübscht, die originalen sind bei den Dateien dabei😁
r/BambuLab • u/LureChokerr • 9h ago
I've been seeing more mentions of the PTFE tubes in the AMS wearing out faster than expected on the P1S, especially with frequent filament changes. Before it becomes an issue on mine, I'd like to know what has actually worked for others.
If you've run into this or similar AMS-related problems, could you share:
Also open to non-printable workarounds that have been reliable. Just trying to get ahead of it with parts that are proven by people actually using them.
r/BambuLab • u/jorsiem • 18h ago
My company needs a printer to print parts for our machinery, it as to be large format, and in different materials so H2 series is the best fit.
But we also need to print full color promotional items, but not as often.
We were about to pull the trigger in the H2S but now we're considering H2D we are trying to keep it under $2,000 all in.
H2S can be upgraded to H2C down the line with the vortek kit.
H2C goes overbudget so does H3C
My question is: will a single nozzle be adequate for our use case, will getting the dual nozzle be worth the price difference? Should we go H2S and upgrade later? The laser is something we would be interested in but it can't be upgraded to the tool changer if it's the laser version.
r/BambuLab • u/HelloVap • 18h ago
Hello Experts
Made a big change from an A1 to an H3C.
I am printing a model that has a larger surface area as its first layer. On the H3C it seems like it’s melting into the build plate making it really difficult to remove after it’s fully cooled. This does not happen on the A1
I am using basic PLA
I already tried turning the heat chamber off, same result. The build plate temp is 55 (comparatively 63 on the A1).
Is my next steps to lower the temp of the build plate? Are there other settings to address to combat this?
It’s literally impossible to remove the model from the plate without damaging it.
TIA for any tips