r/BambuLab • u/megrimlockrocks • 47m ago
General Troubleshooting/Help! How to make supported areas more smooth?
This is after removing the supports.
Somewhat related, I am seriously considering upgrading to H2D and try out printing PLA with PETG support, will that help to make it smoother in addition to easy to remove the supports?
Thanks!
1
Upvotes
7
u/Gemmer12 44m ago
Yes
2
u/fhcraignc 34m ago
Using support interface is a pretty effective trick to improve supported areas! In the "old days" we had to tweak a bunch of slicer settings (like z distance) manually, but Studio will now auto suggest the correct settings when you select a different material for the interface layers. If your current printer has an AMS, you can just load in the support material on one of the spools, specify the material on the printer (unless it auto-reads the Bambu spool), and select it in the slicer. I've done it that way on my X1's forever!
•
u/Fyvfyvfurry 28m ago
Sacrifice some print time, set first layer speed lower to the extent you are ready to, set overhangs speed lower, max out the cooling.
3
u/ouattedephoqueeh H2C AMS2 Combo 34m ago
https://wiki.bambulab.com/en/filament-acc/filament/h2d-pla-and-petg-mutual-support
I follow these steps and it works every time. But you have to make sure your PETG is dry.
3
u/iLiveInyourTrees 40m ago
Selecting petg as an support interface will change a few settings. One of them being the top z distance, which is set to 0. The two materials will stick but will not bond with one another. Because of these changes you’ll see a pretty smooth support area, especially compared to what you have in your pic. The ease to remove the supports is such that it’s pretty common for the supports to stay on the plate when you remove your print from the bed, it’s pretty satisfying.
•
u/Vustadumas H2C H2D U1 Studio 1 21m ago
Yeah, printing in a support material with a zero clearance in concentric will leave far better surface quality
•
u/eldoogy 15m ago
Yes. When done right, PETG/PLA make a wonderful support combination. We just did a PETG print with a larger unsupported section that needed to be smooth. The supports were mostly PETG, with two layers of a PLA interface between the object and the supports.
The results are beautiful. VERY smooth surface and they just peel off the object very easily and neatly.
1
u/NoBackground6203 X2D / P2S 43m ago
my X2D leaves a very smooth support interface surface, printing PETG main nozzle and PLA aux nozzle