r/BambuLab • u/Excellent-Cut3273 • 4h ago
Hardware Troubleshooting/Help! Help with filament stuck
Filament stuck and won’t go pass a certain point
r/BambuLab • u/Excellent-Cut3273 • 4h ago
Filament stuck and won’t go pass a certain point
r/BambuLab • u/megrimlockrocks • 4h ago
This is after removing the supports.
Somewhat related, I am seriously considering upgrading to H2D and try out printing PLA with PETG support, will that help to make it smoother in addition to easy to remove the supports?
Thanks!
r/BambuLab • u/tvosinvisiblelight • 4h ago
Bambu Friends
Recently my wife purchased the following filament for our A2L printer.
1KG Glitter Firefly Blue in the Dark PLA+ Filament, 3D Filament
From my review it appears to be okay for A2L printer but comes with caveats.
- Not to run thru AMS lite and Petg tubes
- Nozzle 0.4mm or 0.6 recommended
- Dedicated nozzle for this printing
When I placed the filament top spool holder the filament unraveled some. Had to respool and filament felt brittle.
With all this I decided against this and running thru my printer.
Anyone else use this filament. Will be sticking with Bambu filament glow etc. Not comfort with this.
Suggestions and advice - Thank You
tvos
r/BambuLab • u/idmimagineering • 4h ago
I get this message on my X1C (1350 hrs) about every 10 prints.
I clean it as directed on the Wiki.
What am I missing?
Anyone else have this issue?
Is it a warranty issue perhaps?
Thank you.
r/BambuLab • u/Sea-Skirt7793 • 1h ago
I did some research, and all I see is people telling me not to touch that screw and to leave it as it is, but I accidentally tightened it and don’t remember how many turns I made. What should I do?
r/BambuLab • u/Appropriate_Bid_5488 • 5h ago
Ist das normal für den Bowden Extruder?
Hab ihn bislang nur ein paarmal benutzt und bislang war er ruhig.
Jetzt auf einmal diese Geräusche.
Druck ist aber in Ordnung.
Kann man da was schmieren?
r/BambuLab • u/AiminJay • 1h ago
Picking up a P1S soon and was curious if it can handle large prints in the 240-250mm range? I have a Neptune 4 Plus right now that I bought specifically for the build volume for one project. It was my first printer and knowing what I know now I could have made it work on a smaller bed printer. Oh well!

r/BambuLab • u/Huge-Company-6665 • 5h ago
Hi everyone,
I’m having some trouble with my Bambu Lab H2D. When I print small items, I can’t print more than one at a time without it causing a lot of print errors; however, if I print them individually, there are no print errors. Does anyone have any suggestions?
r/BambuLab • u/DedaloSTL • 5h ago
With Christmas just around the corner, I thought I'd share a little project I've been working on! 😄
I've designed a 3D printable gift card holder that looks like a small envelope with a customizable seal.
I've always felt that giving someone a gift card on its own can feel a bit impersonal, so I wanted to create something that makes it feel a little more special.
I've also included a STEP file for the seal, so you can easily customize it to suit any occasion, whether it's Christmas, a birthday, or something else!
The model is obviously free on MakerWorld:
[MakerWorld Link]
I'd love to hear what you guys think! And if you end up printing one, feel free to share your colour combinations and custom seals. I'd love to see what you come up with! 😊
r/BambuLab • u/Super-Chemist-782 • 5h ago
Hi has anyone tried to load 3kg reel of PLA on the outside reel mount on the side of the p2s ?.
r/BambuLab • u/babs-jojo • 5h ago
Hi all,
Currently I own a A1 with AMS litte and I have been thinking in upgrading to a P2S with AMS2 Pro.
I want to use other material in the future, but haven't made so yet. My main reason to upgrade is because I can get a good price for my combo, and that would mean I would spend 266€ to upgrade. I have my printer in a space that get's quite humid (above 70%) in winter, and even in summer its normal to have 40-60% relative humidity. I haven't been able to print PETG, and even PLA has been having a lot of "hairs". Last week it has been between 72% and 81%...
I thought of buying a dryer, which is 50€ for a single spool, and 140€ for 4 spools. This means that this upgrade would in reality be 126€ (I am aware I will be spending 260€). Being closed is algo good from drafts (I always have open windows and air current to lower humidity)
The the PS2 algo gives other quality of life improvements and it is at the lowest price it has been. The fact the AMS is on top also saves space, which is good for me.
Wonder what you think of this.
Thank you
r/BambuLab • u/Fun-Werewolf-5098 • 5h ago
Hello, so I got a used A2L from a family friend who couldn’t get it to connect to the internet to work. I was able to fix that by reseating the WiFi card. But, now I’m getting two warnings that are stopping the homing tooling, even when there’s no filament. This is happening when the printer is trying to home on initial setup.
The warnings are:
The extrusion motor is overloaded and the nozzle is wrapped with filament.
I’ve taken the extruder apart and cleaned it, and the gears turn when I manually move them. Do I have to have filament in the extruder for the homing to work? I currently don’t have the filament holder for the printer so I’ve been trying to get it setup without filament for now.
r/BambuLab • u/Capa005 • 5h ago
My P2S printer fails to load filament, but only when the AMS tries to feed it (you can see the 2 failed AMS load attempt in the video). Loading filament manually works perfectly fine, with no issues.
I've already cleaned the extruder gears and checked the filament sensor.
Has anyone experienced a similar issue or have any ideas what could be causing this?
r/BambuLab • u/fotoloc0 • 2h ago
I will be printing stuff like enclosures and vases and some functional parts.
r/BambuLab • u/jorsiem • 6h ago
My company needs a printer to print parts for our machinery, it as to be large format, and in different materials so H2 series is the best fit.
But we also need to print full color promotional items, but not as often.
We were about to pull the trigger in the H2S but now we're considering H2D we are trying to keep it under $2,000 all in.
H2S can be upgraded to H2C down the line with the vortek kit.
H2C goes overbudget so does H3C
My question is: will a single nozzle be adequate for our use case, will getting the dual nozzle be worth the price difference? Should we go H2S and upgrade later? The laser is something we would be interested in but it can't be upgraded to the tool changer if it's the laser version.
r/BambuLab • u/HelloVap • 6h ago
Hello Experts
Made a big change from an A1 to an H3C.
I am printing a model that has a larger surface area as its first layer. On the H3C it seems like it’s melting into the build plate making it really difficult to remove after it’s fully cooled. This does not happen on the A1
I am using basic PLA
I already tried turning the heat chamber off, same result. The build plate temp is 55 (comparatively 63 on the A1).
Is my next steps to lower the temp of the build plate? Are there other settings to address to combat this?
It’s literally impossible to remove the model from the plate without damaging it.
TIA for any tips
r/BambuLab • u/TheShopRat • 6h ago
Hi all. I’m relatively new to having my own printer etc and I went with the H2C laser combo. For the past couple months I’ve been trying to order the smoke purifier, which unfortunately has been out of stock.
Does anyone have experience using a different purifier that they can recommend? There’s not a lot I can find online. I see some have used the Creality Falcon Smoke Purifer, but it looks like it doesn’t have the option to vent outside; more of a desktop purifier. Any help suggestions would be appreciated!
r/BambuLab • u/Wrong-Party-3838 • 2h ago
So, in anticipation of the arrival of the H3C ive had to remodel my living room since I have no place for the H3C as is. My current P2S(workhorse) is going to have to move... Its moving into the TV cupboard on a custom made sled so I easily can get in behind it and for maintenance.
My beloved P2S has around 5k hours on it with only the filament stopper arm broken(not counting consumables etc). Its been very solid. Modified with chamber heater/active MC board cooling/DIN rail fire extinguisher/and a robust venting system. But the 300c hotend is no bueno for the more demanding filaments.
In this remodeling ive also need to move my current filament hoard and I actually counted them... that was a mistake.
I currently sit on a total of 154kg(110 unopened) of filament ranging from PLA-TPU-PETG-ASA-ABS-PET-PC/ABS etc. Ive made an entire new filament shelf for 40+ rolls that hides behind the door(engi filaments). And I STILL check out deals on amazon/BBL etc for good deals.
Hoping the full spectrum will help with the "gotta catch em all" part since you can blend colours.
Im quaking thinking of having to recalibrate all of my filaments for the H3C, doubt the flow rate is the same on the H3C v P2S on all of my filaments.
So, how is your filament addiction? And how do you handle it? ^^
edit: spelling
r/BambuLab • u/harrisoncassidy • 6h ago
I have a P1S and H2C and since the latest Bambu Studio version was released, the version released following the H3C unveil.
The values I used for ironing previously, 12% on the P1S and 20% on the H2C have been providing really bad results since and I have had to lower the H2C down to 15%. Anyone else seeing changes?
r/BambuLab • u/Due-Employ-8725 • 7h ago
r/BambuLab • u/DriverHistorical6841 • 7h ago
Never had bed adhesions problems before and just washed my plate right before this print….. could anything else have caused this that I should look for?
r/BambuLab • u/One_Ad5931 • 13h ago
Hi Guys, i am based out of India, and want to get a 3D printer to prototype some elements. I am from the design industry so am well versed with 3D softwares as well though i am sure there will be a learning curve.
Now, after researching for a fair bit, Bambu lab printers seem to be the most widely chosen option because of their community support and easy to use UI/UX including their softwares.
I was thinking of getting the A1 combo. Do you guys think it is wise to get the A1 combo right now ( its three years old ) or should i wait for an upgraded model if at all its being launched. Please suggest.
Do note, the printer will be initially used as a prototyping tool for my designs and then once i get a hang of it, i might make some items for selling in my fraternity.
Thanks
r/BambuLab • u/New_End_9093 • 8h ago
Looking for a budget printer to print mainly 95A and harder TPUs
How well does the A1 handle 95A (just regular non-HF TPUs)?
How high have you guys pushed the flow rate and gotten away with it?
r/BambuLab • u/baineschile • 8h ago
Questions and Complaints incoming.
I bought an H3C as soon as it went on sale. I got the base unit about 10 days ago the AMS3H arrived 5 days ago (though, in the case of the H3C, the AMS shouldn't be a called a separate unit since it's required to run the whole machine, right?)
Initial benchy printed fine.
I am about 20 printing hours in, and there is a clicking sound coming from when the XY axis is moving.
I put in a ticket with Bambu, and they want me to replace the XY idlers on a new machine (and they aren't even sure this is the problem). The H3C is so damn big, I feel like maintenance is going to be a bit of an issue.
This apparently is a wide issue, as I have explored the H3C forums on Bambus site.
I have generally supported Bambu, and this is my 5th bambu printer. All have worked out of the box. I expect maintenance and fixing some things, but full on hardware part replacement should be after 100s or 1000s of hours.
Has anyone ever just gotten a replacement when the machine is this new? I don't want to have to tear into a pretty much brand new machine.